Hi Andrew, Thank you for your previous feedback and insights. Your contributions have added valuable perspectives to the discussions. And we also benefit from the comparison of different solutions. I’m also looking forward to seeing an initial version in KIP-932, as it will provide a good reference for future implementations.
Regarding your comment on AS2, I wanted to clarify that my specification references org.apache.kafka.common.Uuid. I believe we’re referring to the same class, and it might just be a small oversight due to the busy schedule. I want to express my gratitude once again for your many insightful comments, which have helped the discussion progress smoothly. Best regards, TengYao Andrew Schofield <andrew_schofi...@live.com> 於 2024年8月22日 週四 下午11:28寫道: > Hi TengYao, > I’ve been reading through the comments and I’m happy that the lobby > approach has not gained support. > > Assuming that this KIP is voted, I will be happy to change KIP-932 so > that it only supports client-side member ID generation. Because that KIP > is still > under development, I can do this in the first version of > ShareGroupHeartbeat. > > AS2: For the encoding section, I suppose the specific encoding which > is used is what org.apache.kafka.utils.Uuid uses. > > Thanks, > Andrew > > > On 14 Aug 2024, at 17:00, TengYao Chi <kiting...@gmail.com> wrote: > > > > Hello Apoorv, > > Thank you for your feedback. > > Regarding the questions you raised, unfortunately, this KIP cannot > > guarantee the order of heartbeats. As with many classic distributed > system > > challenges, what we can do is make our best effort to ensure that there > are > > no idle members or stale assignments under normal circumstances. > > > > As for the lobby approach, I’m not a fan of it because it requires > adding a > > mechanism to maintain client state within the ConsumerGroup, which, in my > > view, resembles something like a two-phase commit. This would introduce > > more complexity than the proposal in this KIP, which is something we want > > to avoid. KIP-848 aims to simplify the existing protocol, and while the > > lobby approach is a good one, I believe it is not the right fit for this > > particular situation. > > > > Best regards, > > TengYao > > > > TengYao Chi <kiting...@gmail.com> 於 2024年8月14日 週三 下午11:45寫道: > > > >> Hi David, > >> > >> I really appreciate your review and suggestions. As I am still gaining > >> experience in writing KIPs, your input has been incredibly helpful. I am > >> currently applying your suggestions to the KIP and will complete it as > soon > >> as possible. > >> Regarding the UUID part, I think we haven’t reached a conclusion yet.(So > >> far according to this thread) > >> However, I will review the current implementation in the Kafka `Uuid` > >> class and include a brief specification in the KIP. > >> > >> Once again, thank you so much for your help. > >> > >> Best regards, > >> TengYao > >> > >> Chia-Ping Tsai <chia7...@gmail.com> 於 2024年8月14日 週三 下午11:14寫道: > >> > >>> hi Apoorv > >>> > >>>> As the memberId is now known to the client, and client might send the > >>> leave > >>> group heartbeat on shutdown prior to receiving the initial heartbeat > >>> response. If that's true then how do we guarantee that the 2 requests > to > >>> join and leave will be processed in order, which could still leave > stale > >>> members or throw unknown member id exceptions? > >>> > >>> This is definitely a good question. the short answer: no guarantee but > >>> best > >>> efforts > >>> > >>> Please notice the root cause is "we have no enough time to wait member > id > >>> (response) when closing consumer". Sadly, we can' guarantee the request > >>> order due to the same reason. > >>> > >>> However, in contrast to previous behavior, there is one big benefit of > new > >>> approach - we can try STONITH because we know the member id > >>> > >>> Best, > >>> Chia-Ping > >>> > >>> > >>> Apoorv Mittal <apoorvmitta...@gmail.com> 於 2024年8月14日 週三 下午8:55寫道: > >>> > >>>> Hi TengYao, > >>>> Thanks for the KIP. Continuing on the point which Andrew mentioned as > >>> AS1. > >>>> > >>>> As the memberId is now known to the client, and client might send the > >>> leave > >>>> group heartbeat on shutdown prior to receiving the initial heartbeat > >>>> response. If that's true then how do we guarantee that the 2 requests > to > >>>> join and leave will be processed in order, which could still leave > stale > >>>> members or throw unknown member id exceptions? > >>>> > >>>> Though the client side member id generation is helpful which will > >>> represent > >>>> the same group perspective as from client and broker's end. But I > think > >>> the > >>>> major concern we want to solve here is Stale Partition Assignments > which > >>>> might still exist with the new approach. I am leaning towards the > >>>> suggestion mentioned by Andrew where partition assignment triggers on > >>>> subsequent heartbeat when client acknowledges the initial heartbeat, > >>>> delayed partition assignment. > >>>> > >>>> Though on a separate note, I have a different question. What happens > >>> when > >>>> there is an issue with the client which sends the initial heartbeat > >>> without > >>>> memberId, then crashes and restarts? I think we must be re-triggering > >>>> assignments and expiring members only after the heartbeat session > >>> timeout? > >>>> If that's true then shall delayed partition assignment can help > benefit > >>> us > >>>> from this situation as well? > >>>> > >>>> Regards, > >>>> Apoorv Mittal > >>>> > >>>> > >>>> On Wed, Aug 14, 2024 at 12:51 PM David Jacot > >>> <dja...@confluent.io.invalid> > >>>> wrote: > >>>> > >>>>> Hi Andrew, > >>>>> > >>>>> Personally, I don't like the lobby approach. It makes things more > >>>>> complicated and it would require changing the records on the server > >>> too. > >>>>> This is why I initially suggested the rejected alternative #2 which > is > >>>>> pretty close but also not perfect. > >>>>> > >>>>> I'd like to clarify one thing. The ConsumerGroupHeartbeat API already > >>>>> supports generating the member id on the client so we don't need any > >>>>> conditional logic on the client side. This is actually what we wanted > >>> to > >>>> do > >>>>> in the first place but the idea got pushed back by Magnus back then > >>>> because > >>>>> generating uuid from librdkafka required a new dependency. It turns > >>> out > >>>>> that librdkafka has that dependency today. In retrospect, we should > >>> have > >>>>> pushed back on this. Long story short, we can just do it. The > >>> proposal in > >>>>> this KIP is to make the member id required in future versions. We > >>> could > >>>>> also decide not to do it and to keep supporting both approaches. I > >>> would > >>>>> also be fine with this. > >>>>> > >>>>> Best, > >>>>> David > >>>>> > >>>>> On Wed, Aug 14, 2024 at 12:30 PM Andrew Schofield < > >>>>> andrew_schofi...@live.com> > >>>>> wrote: > >>>>> > >>>>>> Hi TengYao, > >>>>>> Thanks for your response. I’ll have just one more try to persuade. > >>>>>> I feel that I will need to follow the approach with KIP-932 when > >>> we’ve > >>>>>> made a decision, so I do have more than a passing interest in this. > >>>>>> > >>>>>> A group member in the lobby is in the group, but it does not have > >>> any > >>>>>> assignments. A member of a consumer group can have no assigned > >>>>>> partitions (such as 5 CG members subscribed to a topic with 4 > >>>>> partitions), > >>>>>> so it’s a situation that consumer group members already expect. > >>>>>> > >>>>>> One of Kafka’s strengths is the way that we handle API versioning. > >>>>>> But, there is a cost - the behaviour is different depending on the > >>> RPC > >>>>>> version. KIP-848 is on the cusp of completion, but we’re already > >>> adding > >>>>>> conditional logic for v0/v1 for ConsumerGroupHeartbeat. That’s a > >>> pity. > >>>>>> Only a minor issue, but it’s unfortunate. > >>>>>> > >>>>>> Thanks, > >>>>>> Andrew > >>>>>> > >>>>>>> On 14 Aug 2024, at 08:47, TengYao Chi <kiting...@gmail.com> > >>> wrote: > >>>>>>> > >>>>>>> Hello Andrew > >>>>>>> Thank you for your thoughtful suggestions and getting the > >>> discussion > >>>>>> going. > >>>>>>> > >>>>>>> To AS1: > >>>>>>> In the current scenario where the server generates the UUID, if > >>> the > >>>>>> client > >>>>>>> shuts down before receiving the memberId generated by the GC > >>>>> (regardless > >>>>>> of > >>>>>>> whether it’s a graceful shutdown or not), the GC will still have > >>> to > >>>>> wait > >>>>>>> for the heartbeat timeout because the client doesn’t know its > >>>> memberId. > >>>>>>> This KIP indeed cannot completely resolve the idempotency issue, > >>> but > >>>> it > >>>>>> can > >>>>>>> better handle shutdown scenarios under normal circumstances > >>> because > >>>> the > >>>>>>> client always knows its memberId. Even if the client shuts down > >>>>>> immediately > >>>>>>> after the initial heartbeat, as long as it performs a graceful > >>>> shutdown > >>>>>> and > >>>>>>> sends a leave heartbeat, the GC can manage the situation and > >>> remove > >>>> the > >>>>>>> member. Therefore, the goal of this KIP is to address the issue > >>> where > >>>>> the > >>>>>>> GC has to wait for the heartbeat timeout due to the client leaving > >>>>>> without > >>>>>>> knowing its memberId, which leads to reduced throughput and > >>> limited > >>>>>>> scalability. > >>>>>>> > >>>>>>> The solution you suggest has also been proposed by David. The > >>> concern > >>>>>> with > >>>>>>> this approach is that it introduces additional complexity for > >>>>>>> compatibility, as the new server would not immediately add the > >>> member > >>>>> to > >>>>>>> the group, while the old server would. This requires clients to > >>>>>>> differentiate whether their memberId has been added to the group > >>> or > >>>>> not, > >>>>>>> which could result in unexpected logs. > >>>>>>> > >>>>>>> Best Regards, > >>>>>>> TengYao > >>>>>>> > >>>>>>> Andrew Schofield <andrew_schofi...@live.com> 於 2024年8月14日 週三 > >>>>> 上午12:29寫道: > >>>>>>> > >>>>>>>> Hi TengYao, > >>>>>>>> Thanks for the KIP. I wonder if there’s a different way to close > >>>> what > >>>>>>>> is quite a small window. > >>>>>>>> > >>>>>>>> AS1: It is true that the initial heartbeat is not idempotent, but > >>>> this > >>>>>>>> remains > >>>>>>>> true with this KIP. It’s just differently not idempotent. If the > >>>>> client > >>>>>>>> makes its > >>>>>>>> own member ID, sends a request and dies, the GC will still have > >>>> added > >>>>>>>> the member to the group and it will hang around until the session > >>>>>> expires. > >>>>>>>> > >>>>>>>> I wonder if the GC could still generate the member ID in > >>> response to > >>>>> the > >>>>>>>> first > >>>>>>>> heartbeat, and put the member in a special PENDING state with no > >>>>>>>> assignments until the client sends the next heartbeat, thus > >>>> confirming > >>>>>> it > >>>>>>>> has received the member ID. This would not be a protocol change > >>> at > >>>>> all, > >>>>>>>> just > >>>>>>>> a change to the GC to keep a new member in the lobby until it’s > >>>>>> comfirmed > >>>>>>>> it knows its member ID. > >>>>>>>> > >>>>>>>> > >>>>>>>> Thanks, > >>>>>>>> Andrew > >>>>>>>> > >>>>>>>>> On 13 Aug 2024, at 15:59, TengYao Chi <kiting...@gmail.com> > >>> wrote: > >>>>>>>>> > >>>>>>>>> Hi Chia-Ping, > >>>>>>>>> > >>>>>>>>> Thanks for review and suggestions. > >>>>>>>>> I have updated the content of KIP accordingly. > >>>>>>>>> Please take a look. > >>>>>>>>> > >>>>>>>>> Best regards, > >>>>>>>>> TengYao > >>>>>>>>> > >>>>>>>>> Chia-Ping Tsai <chia7...@apache.org> 於 2024年8月13日 週二 下午9:45寫道: > >>>>>>>>> > >>>>>>>>>> hi TengYao > >>>>>>>>>> > >>>>>>>>>> thanks for this KIP. > >>>>>>>>>> > >>>>>>>>>> 1) could you please describe the before/after behavior in the > >>>>>> "Proposed > >>>>>>>>>> Changes" section? IIRC, current RPC allows HB having member id > >>>>>>>> generated by > >>>>>>>>>> client, right? If HB has no member ID, server will generate one > >>>> and > >>>>>> then > >>>>>>>>>> return. The new behavior will enforce HB "must" have member ID. > >>>>>>>>>> > >>>>>>>>>> 2) could you please write the version number explicitly in the > >>> KIP > >>>>>>>>>> > >>>>>>>>>> 3) how new client code handle the old HB? Does it always > >>> generate > >>>>>> member > >>>>>>>>>> ID on client-side even though that is not restricted? > >>>>>>>>>> > >>>>>>>>>> Best, > >>>>>>>>>> Chia-Ping > >>>>>>>>>> > >>>>>>>>>> On 2024/08/13 06:20:42 TengYao Chi wrote: > >>>>>>>>>>> Hello everyone, > >>>>>>>>>>> > >>>>>>>>>>> I would like to start a discussion thread on KIP-1082, which > >>>>> proposes > >>>>>>>>>>> enabling id generation for clients over the > >>>> ConsumerGroupHeartbeat > >>>>>> RPC. > >>>>>>>>>>> > >>>>>>>>>>> Here is the KIP Link: KIP-1082 > >>>>>>>>>>> < > >>>>>>>>>> > >>>>>>>> > >>>>>> > >>>>> > >>>> > >>> > https://cwiki.apache.org/confluence/display/KAFKA/KIP-1082%3A+Enable+ID+Generation+for+Clients+over+the+ConsumerGroupHeartbeat+RPC > >>>>>>>>>>> > >>>>>>>>>>> Please take a look and let me know what you think, and I would > >>>>>>>> appreciate > >>>>>>>>>>> any suggestions and feedback. > >>>>>>>>>>> > >>>>>>>>>>> Best regards, > >>>>>>>>>>> TengYao > >>>>>>>>>>> > >>>>>>>>>> > >>>>>>>> > >>>>>>>> > >>>>>> > >>>>>> > >>>>> > >>>> > >>> > >> > >