Sonke,
  I am actually developer at snaplogic.
  I contacted my platform/backend team.  They said the memory allocation
figure shown in the UI just tells the total amount of memory allocated
since the execution.  It doesn't consider the memory reclaimed or
garbage-collected.  We need not worry about that figure.
  Thanks for your suggestion of trying as a standalone program and catching
the memory stats.  It helped.
Thanks,



On Wed, Mar 6, 2019 at 4:54 PM Sönke Liebau
<soenke.lie...@opencore.com.invalid> wrote:

> Hi Syed,
>
> no worries, glad I could help!
>
> If it helps in any way, I still think that this may just be a case of a
> misunderstood metric. The documentation for the value from your screenshot
> is a bit weird. If this is a paid subscription for SnapLogic, it might be
> worthwhile reaching out to them for clarification.
>
> Best regards and good luck,
> Sönke
>
> On Wed, Mar 6, 2019 at 10:29 AM Syed Mudassir Ahmed <
> syed.mudas...@gaianconsultants.com> wrote:
>
> > Sonke,
> >   Thanks so much again.
> >   As per your suggestion, I created an executable jar file for kafka
> > consumer that runs infinitely.
> >   And I have used VisualVM tool to capture the memory stats.
> >   Below are the three memory stats I have captured:
> >   Stats1: https://i.imgur.com/JfnmNRX.png
> >   Stats2: https://i.imgur.com/8F1xn8o.png
> >   Stats3: https://i.imgur.com/ba98uhN.png
> >
> >   And I see that the heap memory goes to about 60 or 70MB, and then falls
> > back, and the pattern continues.  Max heap consumed at an instant is
> about
> > 70MB.
> >
> >   Maybe there is a problem in my platform on updating the stats.  I shall
> > convey it to my team.
> >
> >   thanks so much for the help.
> > Thanks,
> >
> >
> >
> > On Tue, Mar 5, 2019 at 8:02 PM Sönke Liebau
> > <soenke.lie...@opencore.com.invalid> wrote:
> >
> >> My questions about input parameters are mostly targeted at finding out
> >> whether your code enters the conditional block calling commit at the
> >> bottom
> >> of your code. Endless loop with 100ms poll duration is fine for
> everything
> >> else.
> >>
> >> Regarding the screenshot that seem to be a snaplogic gui again. Didn't
> you
> >> say you ran the code without snaplogic for your last test?
> >> Can you please run that code in isolation either directly from your IDE
> or
> >> compile it to a jar file and then do "java -jar ... " then run jconsole
> >> and
> >> attach to the process to capture heap size data.
> >> Just click on the memory tab and let that run for an hour or so. I am
> >> still
> >> a bit mistrustful of that snaplogic memory allocated metric to be
> honest.
> >>
> >> Best,
> >> Sönke
> >>
> >> On Tue, Mar 5, 2019 at 12:32 PM Syed Mudassir Ahmed <
> >> syed.mudas...@gaianconsultants.com> wrote:
> >>
> >> > I already shared the code snippet earlier.  What do you mean by input
> >> > params?  I am just running the consumer in an infinite loop polling
> for
> >> new
> >> > messages.    Polling time is 100 millisecs.  If the topic is empty,
> the
> >> > memory consumption is gradually increasing over the time and reaching
> to
> >> > about 4GB in about 48 to 64 hours though no messages in the topic.
> >> >
> >> > Coming to the image, I have uploaded it to imgur.  Please find it
> here.
> >> > https://i.imgur.com/dtAyded.png
> >> >
> >> > Let me know if anything else is needed.
> >> >
> >> > Just to make it fast, can we have a one-one call via zoom meeting.  I
> am
> >> > just requesting as I can share all the details and my screen as well.
> >> > After that, we can see what to do next.  If the call is not possible
> >> then
> >> > its ok but it would be great to have it.
> >> > Thanks,
> >> >
> >> >
> >> >
> >> > On Tue, Mar 5, 2019 at 4:29 PM Sönke Liebau
> >> > <soenke.lie...@opencore.com.invalid> wrote:
> >> >
> >> >> Hi Syed,
> >> >>
> >> >> the next step would be for someone else to be able to reproduce the
> >> issue.
> >> >>
> >> >> If you could give me the values for the input parameters that your
> code
> >> >> runs with (as per my last mail) then I am happy to run this again and
> >> take
> >> >> another look at memory consumption.
> >> >> I'll then upload the exact code I used to github, maybe you can run
> >> that
> >> >> in
> >> >> your environment and provide a jconsole screenshot of memory
> >> consumption
> >> >> over time, then we can compare those patterns.
> >> >>
> >> >> Also, could you please upload the image from your last mail to imgur
> >> or a
> >> >> similar service, it seems to have been lost in the mailing list.
> >> >>
> >> >> Best regards,
> >> >> Sönke
> >> >>
> >> >> On Tue, Mar 5, 2019 at 11:48 AM Syed Mudassir Ahmed <
> >> >> syed.mudas...@gaianconsultants.com> wrote:
> >> >>
> >> >> > Sonke,
> >> >> >   I am not blaming apache-kafka for the tickets raised by our
> >> customers.
> >> >> > I am saying there could be an issue in kafka-clients library
> causing
> >> >> > resource/memory leak.  If that issue is resolved, I can resolve my
> >> >> tickets
> >> >> > as well automatically.  I don't find any issue with the snaplogic
> >> code.
> >> >> >   Since I am in touch with developers of kafka-clients thru this
> >> email,
> >> >> I
> >> >> > am looking forward to contribute as much as I can to betterize the
> >> >> > kafka-clients library.
> >> >> >   What the steps next to confirm its a bug in kafka-clients?  And
> if
> >> >> its a
> >> >> > bug whats the process to get it resolved?
> >> >> >
> >> >> > Thanks,
> >> >> >
> >> >> >
> >> >> >
> >> >> > On Tue, Mar 5, 2019 at 2:43 PM Sönke Liebau
> >> >> > <soenke.lie...@opencore.com.invalid> wrote:
> >> >> >
> >> >> >> Hi Syed,
> >> >> >>
> >> >> >> Apache Kafka is an open source software that comes as is without
> any
> >> >> >> support attached to it. It may well be that this is a bug in the
> >> Kafka
> >> >> >> client library, though tbh I doubt that from what my tests have
> >> shown
> >> >> and
> >> >> >> since I think someone else would have noticed this as well.
> >> >> >> Even if this is a bug though, there is no obligation on anyone to
> >> fix
> >> >> >> this. Any bugs your customer raised with you are between you and
> >> them
> >> >> and
> >> >> >> nothing to do with Apache Kafka.
> >> >> >>
> >> >> >> While I am happy to assist you with this I, like most people on
> this
> >> >> >> list, do this in my spare time as well, which means that my time
> to
> >> >> spend
> >> >> >> on this is limited.
> >> >> >>
> >> >> >> That being said, could you please host the image externally
> >> somewhere
> >> >> >> (imgur or something similar), it doesn't appear to have gone
> through
> >> >> the
> >> >> >> list.
> >> >> >>
> >> >> >> What input parameters are you using for isSuggest, messageCount
> and
> >> >> >> synccommit when you run the code?
> >> >> >>
> >> >> >> Best regards,
> >> >> >> Sönke
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >> On Tue, Mar 5, 2019 at 9:14 AM Syed Mudassir Ahmed <
> >> >> >> syed.mudas...@gaianconsultants.com> wrote:
> >> >> >>
> >> >> >>> Sonke,
> >> >> >>>   This issue seems serious.  Customers raised bug with our
> product.
> >> >> And
> >> >> >>> I suspect the bug is in apache-kafka clients library.
> >> >> >>>   I executed the kafka reader without any snaplogic-specific
> code.
> >> >> >>> There were hardly about twenty messages in the topics.  The code
> >> >> consumed
> >> >> >>> about 300MB of memory in about 2 hours.
> >> >> >>>   Please find attached the screenshot.
> >> >> >>>   Can we pls get on a call and arrive at the conclusion?  I still
> >> >> argue
> >> >> >>> its a bug in the kafka-clients library.
> >> >> >>>
> >> >> >>> Thanks,
> >> >> >>>
> >> >> >>>
> >> >> >>>
> >> >> >>> On Mon, Mar 4, 2019 at 8:33 PM Sönke Liebau
> >> >> >>> <soenke.lie...@opencore.com.invalid> wrote:
> >> >> >>>
> >> >> >>>> Hi Syed,
> >> >> >>>>
> >> >> >>>> and you are sure that this memory is actually allocated? I still
> >> have
> >> >> >>>> my reservations about that metric to be honest. Is there any way
> >> to
> >> >> connect
> >> >> >>>> to the process with for example jconsole and having a look at
> >> memory
> >> >> >>>> consumption in there?
> >> >> >>>> Or alternatively, since the code you have sent is not relying on
> >> >> >>>> SnapLogic anymore, can you just run it as a standalone
> application
> >> >> and
> >> >> >>>> check memory consumption?
> >> >> >>>>
> >> >> >>>> That code looks very similar to what I ran (without knowing your
> >> >> input
> >> >> >>>> parameters for issuggest et. al of course) and for me memory
> >> >> consumption
> >> >> >>>> stayed between 120mb and 200mb.
> >> >> >>>>
> >> >> >>>> Best regards,
> >> >> >>>> Sönke
> >> >> >>>>
> >> >> >>>>
> >> >> >>>> On Mon, Mar 4, 2019 at 1:44 PM Syed Mudassir Ahmed <
> >> >> >>>> syed.mudas...@gaianconsultants.com> wrote:
> >> >> >>>>
> >> >> >>>>> Sonke,
> >> >> >>>>>   thanks again.
> >> >> >>>>>   Yes, I replaced the non-kafka code from our end with a simple
> >> >> Sysout
> >> >> >>>>> statement as follows:
> >> >> >>>>>
> >> >> >>>>> do {
> >> >> >>>>>     ConsumerRecords<byte[], byte[]> records =
> >> >> consumer.poll(Duration.of(timeout, ChronoUnit.MILLIS));
> >> >> >>>>>     for (final ConsumerRecord<byte[], byte[]> record :
> records) {
> >> >> >>>>>         if (!infiniteLoop && !oneTimeMode) {
> >> >> >>>>>             --msgCount;
> >> >> >>>>>             if (msgCount < 0) {
> >> >> >>>>>                 break;
> >> >> >>>>>             }
> >> >> >>>>>         }
> >> >> >>>>>         Debugger.doPrint("value read:<" + record.value() +
> ">");
> >> >> >>>>>         /*outputViews.write(new BinaryOutput() {
> >> >> >>>>>             @Override
> >> >> >>>>>             public Document getHeader() {
> >> >> >>>>>                 return generateHeader(record, oldHeader);
> >> >> >>>>>             }
> >> >> >>>>>
> >> >> >>>>>             @Override
> >> >> >>>>>             public void write(WritableByteChannel writeChannel)
> >> >> throws IOException {
> >> >> >>>>>                 try (OutputStream os =
> >> >> Channels.newOutputStream(writeChannel)) {
> >> >> >>>>>                     os.write(record.value());
> >> >> >>>>>                 }
> >> >> >>>>>             }
> >> >> >>>>>         });*/
> >> >> >>>>>         //The offset to commit should be the next offset of the
> >> >> current one,
> >> >> >>>>>         // according to the API
> >> >> >>>>>         offsets.put(new TopicPartition(record.topic(),
> >> >> record.partition()),
> >> >> >>>>>                 new OffsetAndMetadata(record.offset() + 1));
> >> >> >>>>>         //In suggest mode, we should not change the current
> >> offset
> >> >> >>>>>         if (isSyncCommit && isSuggest) {
> >> >> >>>>>             commitOffset(offsets);
> >> >> >>>>>             offsets.clear();
> >> >> >>>>>         }
> >> >> >>>>>     }
> >> >> >>>>> } while ((msgCount > 0 || infiniteLoop) && isRunning.get());
> >> >> >>>>>
> >> >> >>>>>
> >> >> >>>>> *Note: *Debugger is a wrapper class that just writes the given
> >> >> string to a local file using PrintStream's println() method.
> >> >> >>>>>
> >> >> >>>>> And I don't see any diff in the metrics.  I still see the huge
> >> >> amount
> >> >> >>>>> of memory allocated.
> >> >> >>>>>
> >> >> >>>>> See the image attached.
> >> >> >>>>>
> >> >> >>>>>
> >> >> >>>>> Thanks,
> >> >> >>>>>
> >> >> >>>>>
> >> >> >>>>>
> >> >> >>>>> On Mon, Mar 4, 2019 at 5:17 PM Sönke Liebau
> >> >> >>>>> <soenke.lie...@opencore.com.invalid> wrote:
> >> >> >>>>>
> >> >> >>>>>> Hi Syed,
> >> >> >>>>>>
> >> >> >>>>>> let's keep it on the list for now so that everybody can
> >> >> participate :)
> >> >> >>>>>>
> >> >> >>>>>> The different .poll() method was just an unrelated
> observation,
> >> the
> >> >> >>>>>> main points of my mail were the question about whether this is
> >> the
> >> >> >>>>>> correct metric you are looking at and replacing the payload of
> >> your
> >> >> >>>>>> code with a println statement to remove non-Kafka code from
> your
> >> >> >>>>>> program and make sure that the leak is not in there. Have you
> >> tried
> >> >> >>>>>> that?
> >> >> >>>>>>
> >> >> >>>>>> Best regards,
> >> >> >>>>>> Sönke
> >> >> >>>>>>
> >> >> >>>>>> On Mon, Mar 4, 2019 at 7:21 AM Syed Mudassir Ahmed
> >> >> >>>>>> <syed.mudas...@gaianconsultants.com> wrote:
> >> >> >>>>>> >
> >> >> >>>>>> > Sonke,
> >> >> >>>>>> >   Thanks so much for the reply.  I used the new version of
> >> >> >>>>>> poll(Duration) method.  Still, I see memory issue.
> >> >> >>>>>> >   Is there a way we can get on a one-one call and discuss
> this
> >> >> >>>>>> pls?  Let me know your availability.  I can share zoom meeting
> >> >> link.
> >> >> >>>>>> >
> >> >> >>>>>> > Thanks,
> >> >> >>>>>> >
> >> >> >>>>>> >
> >> >> >>>>>> >
> >> >> >>>>>> > On Sat, Mar 2, 2019 at 2:15 AM Sönke Liebau <
> >> >> >>>>>> soenke.lie...@opencore.com.invalid> wrote:
> >> >> >>>>>> >>
> >> >> >>>>>> >> Hi Syed,
> >> >> >>>>>> >>
> >> >> >>>>>> >> from your screenshot I assume that you are using SnapLogic
> to
> >> >> run
> >> >> >>>>>> your
> >> >> >>>>>> >> code (full disclosure: I do not have the faintest idea of
> >> this
> >> >> >>>>>> >> product!). I've just had a look at the docs and am a bit
> >> >> confused
> >> >> >>>>>> by
> >> >> >>>>>> >> their explanation of the metric that you point out in your
> >> image
> >> >> >>>>>> >> "Memory Allocated". The docs say: "The Memory Allocated
> >> reflects
> >> >> >>>>>> the
> >> >> >>>>>> >> number of bytes that were allocated by the Snap.  Note that
> >> this
> >> >> >>>>>> >> number does not reflect the amount of memory that was freed
> >> and
> >> >> it
> >> >> >>>>>> is
> >> >> >>>>>> >> not the peak memory usage of the Snap.  So, it is not
> >> >> necessarily a
> >> >> >>>>>> >> metric that can be used to estimate the required size of a
> >> >> Snaplex
> >> >> >>>>>> >> node.  Rather, the number provides an insight into how much
> >> >> memory
> >> >> >>>>>> had
> >> >> >>>>>> >> to be allocated to process all of the documents.  For
> >> example,
> >> >> if
> >> >> >>>>>> the
> >> >> >>>>>> >> total allocated was 5MB and the Snap processed 32
> documents,
> >> >> then
> >> >> >>>>>> the
> >> >> >>>>>> >> Snap allocated roughly 164KB per document.  When combined
> >> with
> >> >> the
> >> >> >>>>>> >> other statistics, this number can help to identify the
> >> potential
> >> >> >>>>>> >> causes of performance issues."
> >> >> >>>>>> >> The part about not reflecting memory that was freed makes
> me
> >> >> >>>>>> somewhat
> >> >> >>>>>> >> doubtful whether this actually reflects how much memory the
> >> >> process
> >> >> >>>>>> >> currently holds.  Can you give some more insight there?
> >> >> >>>>>> >>
> >> >> >>>>>> >> Apart from that, I just ran your code somewhat modified to
> >> make
> >> >> it
> >> >> >>>>>> >> work without dependencies for 2 hours and saw no unusual
> >> memory
> >> >> >>>>>> >> consumption, just a regular garbage collection sawtooth
> >> pattern.
> >> >> >>>>>> That
> >> >> >>>>>> >> being said, I had to replace your actual processing with a
> >> >> simple
> >> >> >>>>>> >> println, so if there is a memory leak in there I would of
> >> course
> >> >> >>>>>> not
> >> >> >>>>>> >> have noticed.
> >> >> >>>>>> >> I've uploaded the code I ran [1] for reference. For further
> >> >> >>>>>> analysis,
> >> >> >>>>>> >> maybe you could run something similar with just a println
> or
> >> >> noop
> >> >> >>>>>> and
> >> >> >>>>>> >> see if the symptoms persist, to localize the leak (if it
> >> >> exists).
> >> >> >>>>>> >>
> >> >> >>>>>> >> Also, two random observations on your code:
> >> >> >>>>>> >>
> >> >> >>>>>> >> KafkaConsumer.poll(Long timeout) is deprecated, you should
> >> >> consider
> >> >> >>>>>> >> using the overloaded version with a Duration parameter
> >> instead.
> >> >> >>>>>> >>
> >> >> >>>>>> >> The comment at [2] seems to contradict the following code,
> as
> >> >> the
> >> >> >>>>>> >> offsets are only changed when in suggest mode. But as I
> have
> >> no
> >> >> >>>>>> idea
> >> >> >>>>>> >> what suggest mode even is or all this means this
> observation
> >> >> may be
> >> >> >>>>>> >> miles of point :)
> >> >> >>>>>> >>
> >> >> >>>>>> >> I hope that helps a little.
> >> >> >>>>>> >>
> >> >> >>>>>> >> Best regards,
> >> >> >>>>>> >> Sönke
> >> >> >>>>>> >>
> >> >> >>>>>> >> [1]
> >> >> >>>>>>
> >> >>
> https://gist.github.com/soenkeliebau/e77e8665a1e7e49ade9ec27a6696e983
> >> >> >>>>>> >> [2]
> >> >> >>>>>>
> >> >>
> >>
> https://gist.github.com/soenkeliebau/e77e8665a1e7e49ade9ec27a6696e983#file-memoryleak-java-L86
> >> >> >>>>>> >>
> >> >> >>>>>> >>
> >> >> >>>>>> >> On Fri, Mar 1, 2019 at 7:35 AM Syed Mudassir Ahmed
> >> >> >>>>>> >> <syed.mudas...@gaianconsultants.com> wrote:
> >> >> >>>>>> >> >
> >> >> >>>>>> >> >
> >> >> >>>>>> >> > Thanks,
> >> >> >>>>>> >> >
> >> >> >>>>>> >> >
> >> >> >>>>>> >> >
> >> >> >>>>>> >> > ---------- Forwarded message ---------
> >> >> >>>>>> >> > From: Syed Mudassir Ahmed <
> >> syed.mudas...@gaianconsultants.com
> >> >> >
> >> >> >>>>>> >> > Date: Tue, Feb 26, 2019 at 12:40 PM
> >> >> >>>>>> >> > Subject: Apache Kafka Memory Leakage???
> >> >> >>>>>> >> > To: <us...@kafka.apache.org>
> >> >> >>>>>> >> > Cc: Syed Mudassir Ahmed <
> >> syed.mudas...@gaianconsultants.com>
> >> >> >>>>>> >> >
> >> >> >>>>>> >> >
> >> >> >>>>>> >> > Hi Team,
> >> >> >>>>>> >> >   I have a java application based out of latest Apache
> >> Kafka
> >> >> >>>>>> version 2.1.1.
> >> >> >>>>>> >> >   I have a consumer application that runs infinitely to
> >> >> consume
> >> >> >>>>>> messages whenever produced.
> >> >> >>>>>> >> >   Sometimes there are no messages produced for hours.
> >> Still,
> >> >> I
> >> >> >>>>>> see that the memory allocated to consumer program is
> drastically
> >> >> increasing.
> >> >> >>>>>> >> >   My code is as follows:
> >> >> >>>>>> >> >
> >> >> >>>>>> >> > AtomicBoolean isRunning = new AtomicBoolean(true);
> >> >> >>>>>> >> >
> >> >> >>>>>> >> > Properties kafkaProperties = new Properties();
> >> >> >>>>>> >> >
> >> >> >>>>>> >> >
> >> >> >>>>>>
> >> >> kafkaProperties.setProperty(ConsumerConfig.BOOTSTRAP_SERVERS_CONFIG,
> >> >> >>>>>> brokers);
> >> >> >>>>>> >> >
> >> >> >>>>>> >> > kafkaProperties.put(ConsumerConfig.GROUP_ID_CONFIG,
> >> groupID);
> >> >> >>>>>> >> >
> >> >> >>>>>> >> > kafkaProperties.put(ConsumerConfig.CLIENT_ID_CONFIG,
> >> >> >>>>>> UUID.randomUUID().toString());
> >> >> >>>>>> >> >
> >> kafkaProperties.put(ConsumerConfig.ENABLE_AUTO_COMMIT_CONFIG,
> >> >> >>>>>> false);
> >> >> >>>>>> >> >
> >> kafkaProperties.put(ConsumerConfig.AUTO_OFFSET_RESET_CONFIG,
> >> >> >>>>>> AUTO_OFFSET_RESET_EARLIEST);
> >> >> >>>>>> >> > consumer = new KafkaConsumer<byte[],
> >> byte[]>(kafkaProperties,
> >> >> >>>>>> keyDeserializer, valueDeserializer);
> >> >> >>>>>> >> > if (topics != null) {
> >> >> >>>>>> >> >     subscribeTopics(topics);
> >> >> >>>>>> >> > }
> >> >> >>>>>> >> >
> >> >> >>>>>> >> >
> >> >> >>>>>> >> >     boolean infiniteLoop = false;
> >> >> >>>>>> >> >     boolean oneTimeMode = false;
> >> >> >>>>>> >> >     int timeout = consumeTimeout;
> >> >> >>>>>> >> >     if (isSuggest) {
> >> >> >>>>>> >> >         //Configuration for suggest mode
> >> >> >>>>>> >> >         oneTimeMode = true;
> >> >> >>>>>> >> >         msgCount = 0;
> >> >> >>>>>> >> >         timeout = DEFAULT_CONSUME_TIMEOUT_IN_MS;
> >> >> >>>>>> >> >     } else if (msgCount < 0) {
> >> >> >>>>>> >> >         infiniteLoop = true;
> >> >> >>>>>> >> >     } else if (msgCount == 0) {
> >> >> >>>>>> >> >         oneTimeMode = true;
> >> >> >>>>>> >> >     }
> >> >> >>>>>> >> >     Map<TopicPartition, OffsetAndMetadata> offsets =
> >> >> >>>>>> Maps.newHashMap();
> >> >> >>>>>> >> >     do {
> >> >> >>>>>> >> >             ConsumerRecords<byte[], byte[]> records =
> >> >> >>>>>> consumer.poll(timeout);
> >> >> >>>>>> >> >             for (final ConsumerRecord<byte[], byte[]>
> >> record :
> >> >> >>>>>> records) {
> >> >> >>>>>> >> >                 if (!infiniteLoop && !oneTimeMode) {
> >> >> >>>>>> >> >                     --msgCount;
> >> >> >>>>>> >> >                     if (msgCount < 0) {
> >> >> >>>>>> >> >                         break;
> >> >> >>>>>> >> >                     }
> >> >> >>>>>> >> >                 }
> >> >> >>>>>> >> >                 outputViews.write(new BinaryOutput() {
> >> >> >>>>>> >> >                     @Override
> >> >> >>>>>> >> >                     public Document getHeader() {
> >> >> >>>>>> >> >                         return generateHeader(record,
> >> >> oldHeader);
> >> >> >>>>>> >> >                     }
> >> >> >>>>>> >> >
> >> >> >>>>>> >> >                     @Override
> >> >> >>>>>> >> >                     public void write(WritableByteChannel
> >> >> >>>>>> writeChannel) throws IOException {
> >> >> >>>>>> >> >                         try (OutputStream os =
> >> >> >>>>>> Channels.newOutputStream(writeChannel)) {
> >> >> >>>>>> >> >                             os.write(record.value());
> >> >> >>>>>> >> >                         }
> >> >> >>>>>> >> >                     }
> >> >> >>>>>> >> >                 });
> >> >> >>>>>> >> >                 //The offset to commit should be the next
> >> >> offset
> >> >> >>>>>> of the current one,
> >> >> >>>>>> >> >                 // according to the API
> >> >> >>>>>> >> >                 offsets.put(new
> >> TopicPartition(record.topic(),
> >> >> >>>>>> record.partition()),
> >> >> >>>>>> >> >                         new
> >> OffsetAndMetadata(record.offset()
> >> >> +
> >> >> >>>>>> 1));
> >> >> >>>>>> >> >                 //In suggest mode, we should not change
> the
> >> >> >>>>>> current offset
> >> >> >>>>>> >> >                 if (isSyncCommit && isSuggest) {
> >> >> >>>>>> >> >                     commitOffset(offsets);
> >> >> >>>>>> >> >                     offsets.clear();
> >> >> >>>>>> >> >                 }
> >> >> >>>>>> >> >             }
> >> >> >>>>>> >> >      } while ((msgCount > 0 || infiniteLoop) &&
> >> >> isRunning.get());
> >> >> >>>>>> >> >
> >> >> >>>>>> >> >
> >> >> >>>>>> >> > See the screenshot below.  In about nineteen hours, it
> just
> >> >> >>>>>> consumed 5 messages but the memory allocated is 1.6GB.
> >> >> >>>>>> >> >
> >> >> >>>>>> >> >
> >> >> >>>>>> >> > Any clues on how to get rid of memory issue?  Anything I
> >> need
> >> >> to
> >> >> >>>>>> do in the program or is it a bug in the kafka library?
> >> >> >>>>>> >> >
> >> >> >>>>>> >> > Please rever ASAP.
> >> >> >>>>>> >> >
> >> >> >>>>>> >> >
> >> >> >>>>>> >> > Thanks,
> >> >> >>>>>> >> >
> >> >> >>>>>> >>
> >> >> >>>>>> >>
> >> >> >>>>>> >> --
> >> >> >>>>>> >> Sönke Liebau
> >> >> >>>>>> >> Partner
> >> >> >>>>>> >> Tel. +49 179 7940878
> >> >> >>>>>> >> OpenCore GmbH & Co. KG - Thomas-Mann-Straße 8 - 22880
> Wedel -
> >> >> >>>>>> Germany
> >> >> >>>>>>
> >> >> >>>>>>
> >> >> >>>>>>
> >> >> >>>>>> --
> >> >> >>>>>> Sönke Liebau
> >> >> >>>>>> Partner
> >> >> >>>>>> Tel. +49 179 7940878
> >> >> >>>>>> OpenCore GmbH & Co. KG - Thomas-Mann-Straße 8 - 22880 Wedel -
> >> >> Germany
> >> >> >>>>>>
> >> >> >>>>>
> >> >> >>>>
> >> >> >>>> --
> >> >> >>>> Sönke Liebau
> >> >> >>>> Partner
> >> >> >>>> Tel. +49 179 7940878
> >> >> >>>> OpenCore GmbH & Co. KG - Thomas-Mann-Straße 8 - 22880 Wedel -
> >> Germany
> >> >> >>>>
> >> >> >>>
> >> >> >>
> >> >> >> --
> >> >> >> Sönke Liebau
> >> >> >> Partner
> >> >> >> Tel. +49 179 7940878
> >> >> >> OpenCore GmbH & Co. KG - Thomas-Mann-Straße 8 - 22880 Wedel -
> >> Germany
> >> >> >>
> >> >> >
> >> >>
> >> >> --
> >> >> Sönke Liebau
> >> >> Partner
> >> >> Tel. +49 179 7940878
> >> >> OpenCore GmbH & Co. KG - Thomas-Mann-Straße 8 - 22880 Wedel - Germany
> >> >>
> >> >
> >>
> >> --
> >> Sönke Liebau
> >> Partner
> >> Tel. +49 179 7940878
> >> OpenCore GmbH & Co. KG - Thomas-Mann-Straße 8 - 22880 Wedel - Germany
> >>
> >
>
> --
> Sönke Liebau
> Partner
> Tel. +49 179 7940878
> OpenCore GmbH & Co. KG - Thomas-Mann-Straße 8 - 22880 Wedel - Germany
>

Reply via email to