Dear:
Wechat group "Apache Linkis community Development group "chat records are as
follows:微信群"Apache Linkis 社区开发群"的聊天记录如下:
————— 2022-10-7 —————
jyh 15:25
Everyone, install Visual alis1.0.0 version, DSS is 1.1.0, Projects,
Organizations, Favorites show 500 error, how to deal with?
各位大佬，安装visualis1.0.0版本，dss用的是1.1.0，projects、organizations、favorites提示500错误，改如何处理？
jyh 15:25
jyh 15:26
{"timestamp":1665127311898,"path":"/api/rest_s/v1/visualis/projects","status":500,"error":"Internal
Server Error","message":"","requestId":"f47c9c40-2707"}
{"timestamp":1665127311899,"path":"/api/rest_s/v1/visualis/organizations","status":500,"error":"Internal
Server Error","message":"","requestId":"a5b7dd08-2708"}
{"timestamp":1665127311902,"path":"/api/rest_s/v1/visualis/projects/favorites","status":500,"error":"Internal
Server Error","message":"","requestId":"72c86697-2709"}
Mr Flash 17:22
@jyh 老哥注意一下 需要安装appconn，然后注意填写的端口
Jyh Note that AppConn needs to be installed and the port you fill in
Mr Flash 17:22
这个看起来是没有路由到正确的服务
This does not appear to be routed to the correct service
Mr Flash 17:24
噢
Oh!
Mr Flash 17:24
还有一种
There is also a
Mr Flash 17:24
就是安装以后，需要新建一个项目才能用
After installation, you need to create a new project to use it
jyh 17:24
[呲牙]在dss端的appconn已经安装了
[Yi-tooth] AppConn has been installed on the DSS
Mr Flash 17:24
之前的项目都没有办法用visualis的
Previous projects have no way to use Visualis
Mr Flash 17:25
看看visualis有没有正确注册到eureka
See if Visualis is properly registered to Eureka
jyh 17:25
在dss端新建项目还是visualis端新建项目？
New project in DSS or Visualis?
Mr Flash 17:25
在dss新建项目
Create a new project in the DSS
jyh 17:25
我也是想试试visualis
I also want to try Visualis
jyh 17:26
已经注册成功了
It has been registered successfully
Mr Lightning 17:26
就是你安装完了，需要在dss再建一个项目，才能用visualis
When you finish installing, you need to build another project in DSS to use
Visualis
jyh 17:26
现在就是因为上面的错误，影响到了dss新建项目。 Now it is because of the above error that the DSS new
project is affected.现在在dss端新建项目都无法成功。
New projects cannot be created on the DSS side.
Flash Sir 17:27
那这种 看起来就是这里dss发起visualis请求路由失败 转发不过去
Then this looks like here the DSS initiated the Visualis request routing
failure forward
jyh 17:27
应该是在dss新建项目，需要同步到visualis，同步不成功，在dss新建项目都失败了
It should be new project in DSS, need to synchronize to Visualis,
synchronization failed, new project in DSS failed
jyh 17:27
是的
Yes.
Flash Sir 17:27
gateway可能会有日志
The gateway may have logs
jyh 17:27
在dss发起的visualis请求路由失败
The routing of the Visualis request initiated at the DSS failed
Mr Flash 17:28
这个请求，是在那几个配置表里面控制的
This request is controlled in those configuration tables
Mr Flash 17:28
instance
instance
Mr. Flash 17:29
这里好像是要填前端的端口，不是后台服务端口
This seems to be the front-end port, not the back-end service port
jyh 17:29
gateway是有日记也是提示连接服务失败
Gateway either has a diary or indicates that the connection service failed
Mr. Flash 17:29
是前端页面nginx的端口
Is the port for the front-end page nginx
Mr Flash at 17:30
就是安装appconn的时候，填的那个端口和ip，再检查一下。
That's the same port and IP address you filled in when you installed AppConn.
Check again.
这个visualis的前端，必须要和dss安装在一起
This Visualis front end must be installed with the DSS
jyh 17:31
是这个表不？ Is this the watch?
jyh 17:31
Mr Flash 17:32
Yes.
jyh 17:32
如果是上面的表，我填的端口也是nginx的端口 If it is the table above, I fill in the port is also
nginx port
jyh 17:32
Flash Sir 17:33
看起来问题不大…… It doesn't look like a problem...基本上就是靠这个直接连的前端，然后前端响应这个请求……
It's basically this front end that connects directly, and then the front end
responds to the request...
看看visualis那边的日志是不是有报错
See if there are any errors in the Visualis log
jyh 17:34
我怀疑配置有点问题
I suspect something is wrong with the configuration
jyh 17:35
这个是gateway的日记
This is Gateway's diary
jyh 17:41
@utopianet_广银信用卡_张华金
老哥，成功了，是服务IP的问题，之前是visualis配置文件服务的IP用得是127.0.0.1，改成服务器的IP就可以了 @utopianet_
Guangzhou credit card _ Zhang Huajin brother, utopianet is successful, it's the
service IP, the previous IP of the Visualis profile service was 127.0.0.1, just
change it to the server IP
