Hi Anderson, I had a similar problem some time ago and, pardoxically, the problem in my case was not a too small size but a too large size of the partitions. In my case the problem was that one of the partitions, the fat32 partition to be specific, was 4GB. Therefore the creation of the other partitions, e.g. root and boot partition, was failing if the overall HD size was only 4GB. As Mitsutaka was proposing, it is a good idea to check the configured sizes of the partitions. You can do this in the "Target config" menu which can be selected in the MIC GUI. Check the value of Fat32 partition size, it should be zero. Also check the sizes of the other partitions to make sure that the sum is not exceeding the size of your virtual HD. An easy check whether you have a similar problem would be to test whether the install image works if applied to a 10GB virtual harddisk in qemu instead of te 4GB you were using.
Regards, Marcel >-----Original Message----- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On >Behalf Of Mitsutaka Amano >Sent: Donnerstag, 6. November 2008 10:36 >To: anderson.huang >Cc: [email protected] >Subject: Re: [Moblin Dev] "No space left " when install usb install image >in qemu > >Hi Anderson, > > >anderson.huang wrote: >> Hi Amano-San: >> >> Thank you for your reply. I have two question: >> >> 1.Do you want me to check th e config by pressing "target config" >> button on MIC interface or the file in >> /usr/share/pdk/platforms/menlow-lpia-moblin2/initramfs/usb? >You check the following. ><project path>/targets/<target path>/config/ >hd_swap_partition_size >hd_fat32_partition_size >hd_boot_partition_size > >I think your problem is hd_boot_partition_size is small size. so Some >files couldn't copy to /mnt/boot/... >> >> 2.If the target configuration have problem. Why can other people >> successful to install that image on their machine? We are all using >> Dell Vostro 200. The hardware environment is totally the same. >menlow-lpia-moblin2 is for CrownBeach. and netbook-lpia-moblin2 is for >EeePC901(included the Atom processor) . >If you want to try to other machine, you might replace another kernel on >target environment. > >Thanks, >> >> Regards, >> -Anderson >> >> >> >> >> Mitsutaka Amano 写道: >>> Hi Anderson, >>> >>> Maybe fdisk was failed for it can't split partitions. >>> Please check your target config on moblin2 target environment. >>> >>> Thanks, >>> >>> ======================================== >>> Mitsutaka Amano >>> MIRACLE LINUX CORPORATION >>> ======================================== >>> >>> >>> >>> anderson.huang wrote: >>>> Hi: >>>> >>>> I'm a beginner of moblin. I use ubuntu 8.04 as my host OS. After I >>>> create an usb install image, then I try to install it in qemu by the >>>> commands below: >>>> >>>> #qemu-image create -f qcow2 4G >>>> #qemu -no-acpi -m 384 -hda moblin2-test-installusb.img -hdb >>>> moblin2_hd1.img -boot c >>>> >>>> but in the end of the installation, I always saw this: >>>> >>>> ...... >>>> cp:writing '/mnt/boot/grub/stage1': No space left on device >>>> Umounting partions... >>>> error writing /etc/mtab.tmp: No space left on device >>>> error writing /etc/mtab.tmp: No space left on device >>>> error writing /etc/mtab.tmp: No space left on device >>>> umount: /tmp/install:device is busy >>>> install Successfully >>>> ...... >>>> >>>> When I try to boot the system, it stop in "Boot from Hard Disk...". >>>> And I found that, the virtual disk image file of that VM is just 36k. >>>> Could anyone give me some advice,please? I also tried it on Fedora 9, >>>> fail also. I got the same error. I have reinstall OS for many times, >>>> almost going crazy. . Please help me! Thank you very much! >>>> >>>> PTW: The usb install image can be installed successfully on other >>>> people's machine. We all use the same machine in our office: Dell >>>> Vostro 200. >>>> >>>> Regards, >>>> -Anderson >>>> >>>> _______________________________________________ >>>> Moblin dev Mailing List >>>> [email protected] >>>> >>>> To manage or unsubscribe from this mailing list visit: >>>> https://lists.moblin.org/mailman/listinfo/dev or your user account on >>>> http://moblin.org once logged in. >>>> >>>> For more information on the Moblin Developer Mailing lists visit: >>>> http://moblin.org/community/mailing-lists >>>> >>> >>> >> >> > >_______________________________________________ >Moblin dev Mailing List >[email protected] > >To manage or unsubscribe from this mailing list visit: >https://lists.moblin.org/mailman/listinfo/dev or your user account on >http://moblin.org once logged in. > >For more information on the Moblin Developer Mailing lists visit: >http://moblin.org/community/mailing-lists --------------------------------------------------------------------- Intel GmbH Dornacher Strasse 1 85622 Feldkirchen/Muenchen Germany Sitz der Gesellschaft: Feldkirchen bei Muenchen Geschaeftsfuehrer: Douglas Lusk, Peter Gleissner, Hannes Schwaderer Registergericht: Muenchen HRB 47456 Ust.-IdNr. VAT Registration No.: DE129385895 Citibank Frankfurt (BLZ 502 109 00) 600119052 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. _______________________________________________ Moblin dev Mailing List [email protected] To manage or unsubscribe from this mailing list visit: https://lists.moblin.org/mailman/listinfo/dev or your user account on http://moblin.org once logged in. For more information on the Moblin Developer Mailing lists visit: http://moblin.org/community/mailing-lists
