Dear all moblin builders Recently I am exploring the possibility of downgrade/upgrade kernel on a menlow-lpia-moblin2 platform.
I tried kernel-mid-2.6.24 on a targer root-fs of menlow-lpia-moblin2. It did be compiled and binrpm-pkg can be generated! I installed them without problems. Unfortunately, it did not give initrd.img, thus I created it manually via mkinitrd. As we can imagine, MIC's helping Python InstallImage.py and/or Mkinitrd.py should help us to do right thing when creating Live USB or some other type of images. However, it never is done quite good. The initrd image on DD's USB is missing. After copying initrd.img from target root-fs into USB flash disk, it still cannot be booted. There must be something we should know to configure kernel or guide InstallImage.py and Mkinitrd.py to set up correct USB Live image booting. (Yes, my own kernel-mid cannot recognize USB flash, or SSD or IDE hard disk attached on a IDE bus/cable. too. Sigh~) If you have any tiny hints or clues to show me, please let me know. I do appreciate on this very deeply. After I achieve this, then I could use JTAG debugger to trace kernel booting and running. Thanks in advance. Anthony Lee APAC UMG, Intel _______________________________________________ Moblin dev Mailing List [email protected] To manage or unsubscribe from this mailing list visit: https://lists.moblin.org/mailman/listinfo/dev or your user account on http://moblin.org once logged in. For more information on the Moblin Developer Mailing lists visit: http://moblin.org/community/mailing-lists
