If your module uses Scilab functions (written in Scilab language)
defined in Scilab libraries
if you change the libray after a function has been used, the function is
not updated.
So you need to clear all functions using the following instruction
execstr("clear "+string(trabalho1lib))
Serge Steer
Le 26/10/2014 05:09, Vicente Helano a écrit :
Dears,
I have created a simple Scilab module called "trabalho1lib" following
the instructions in:
http://wiki.scilab.org/howto/Create%20a%20toolbox#How_to_create_an_external_module_.28toolbox.29
and
http://perso.telecom-paristech.fr/~blanchet/FCFD/Scilab/docs/sciextensions-v0.2.pdf
but I am experiencing a weird problem. When I modify any file
belonging to the module, I execute the following commands:
ulink(); clear trabalho1lib;
exec('/home/vicentehelano/Desktop/trabalho1/builder.sce', -1)
exec('/home/vicentehelano/Desktop/trabalho1/loader.sce', -1)
as suggested in the "sciextensions-v0.2.pdf", but the "old" code is
executed instead of the new one, even after executing the
"cleaner.sce" script. Sometimes I have to restart the entire Scilab to
get the module updated.
Has anyone experienced this problem before?
Am I doing anything wrong?
Thanks in advance.
Best regards,
Vicente Helano.
_______________________________________________
dev mailing list
[email protected]
http://lists.scilab.org/mailman/listinfo/dev
_______________________________________________
dev mailing list
[email protected]
http://lists.scilab.org/mailman/listinfo/dev
