Do you mean this part in https://source.tizen.org/documentation/developer-guide/cloning-tizen-source:
Download the manifest for specific snapshot. An example is shown below: $ wget https://download.tizen.org/releases/daily/tizen/ivi/ivi-release/tizen_20131011.2/builddata/manifest/tizen_20131011.2_ia32.xml Note: Go to Tizen IVI Snapshots to select the desired snapshot. This is just an example, and here’s a Note to let you go to release folder to select desired one. If this is not the part you refer to, please give detail link URL. Thanks Qiang -----Original Message----- From: Suresh Kanzariya [mailto:[email protected]] Sent: Thursday, April 03, 2014 8:16 PM To: Zhang, Qiang Z Cc: Ding, Jian-feng; Stéphane Desneux; [email protected] Subject: Re: [Dev] Help - Build tizen generic image HI Qiang, https://lists.tizen.org/pipermail/dev/2014-March/002210.html. As per this release branch code is old and need to use snapshot branch, And in 'clone tizen image' link, document under section 3.2.3 it takes .xml file under release branch which is too old. Please update the document with the latest source. Thanks, Suresh On 4/3/14, Zhang, Qiang Z <[email protected]<mailto:[email protected]>> wrote: > > > -----Original Message----- > From: Suresh Kanzariya [mailto:[email protected]] > Sent: Thursday, April 03, 2014 1:18 AM > To: Zhang, Qiang Z > Cc: Ding, Jian-feng; Stéphane Desneux; > [email protected]<mailto:[email protected]> > Subject: Re: [Dev] Help - Build tizen generic image > > Hi, > > As per Stephane told after repo init, I copied snapshot manifest file > into generic/project.xml and started 'repo sync' again. I am also > reading the document and it is now clear from where to apply 'gbs > build' command to create image and which gbs.conf file will be used. > [Qiang] Yes, you need copy manifest.xml from snapshot repo now. As I > said This extra work will not needed after we finish enable > accepted/tizen_generic branch for all projects. This work expect can > be finished this week. > > I am now reading the document > https://source.tizen.org/documentation/developer-guide/cloning-tizen-s > ource which mentioned repo of a release branch which is I think > outdated as per > https://lists.tizen.org/pipermail/dev/2014-March/002210.html. If so > please update the document with latest snapshot so that there won't be > any problem for a newbie like me to getinto Tizen development. > > [Qiang] Do you mean the choice if remote repo? I have reviewed our > document and I found tizen generic remote repos have not been > referred. It will be added in hours. > > > I will post updates. > > Thanks. > Suresh > > On 4/2/14, Zhang, Qiang Z > <[email protected]<mailto:[email protected]>> wrote: >> Hi Suresh, >> >> Just as Jian-feng said, I suggest you to follow our document to build >> image from scratch: >> >> https://source.tizen.org/documentation/developer-guide/creating-tizen >> - >> image-scratch >> >> First read: Section 2 of >> https://source.tizen.org/documentation/developer-guide/cloning-tizen- >> s >> ource >> , you should have done. >> Then section 2 of >> https://source.tizen.org/documentation/developer-guide/building-packa >> g >> es-locally, >> you will learn >> - which gbs.conf will be used, how to run 'gbs build', and which >> options may be used >> - output of gbs build >> >> Finally, refer to >> https://source.tizen.org/documentation/developer-guide/creating-tizen >> - image to create image using the output local rpm repo created by ' >> gbs build'. >> >> Thanks >> Qiang >> >> >> -----Original Message----- >> From: Suresh Kanzariya [mailto:[email protected]] >> Sent: Wednesday, April 02, 2014 8:30 PM >> To: Ding, Jian-feng >> Cc: Stéphane Desneux; [email protected]<mailto:[email protected]>; >> Zhang, Qiang Z >> Subject: Re: [Dev] Help - Build tizen generic image >> >> Thanks Jian for the explanation, Will try and let you know the feedback. >> >> Thanks. >> Suresh >> >> On 4/2/14, Jian-feng Ding >> <[email protected]<mailto:[email protected]>> wrote: >>>> One more thing, Suppose I want to build Tizen image for mobile >>>> then I need to sync the mobile repo and also need to change my >>>> gbs.conf file pointing to Tizen:mobile, Right? >>> >>> Yes, different profile need it's corresponding packages and repos. >>> >>> And 'gbs build' is just the first step to generate images, which >>> will only create the rpm repos after building done. You need to >>> provide a workable ks file and run 'gbs createimage' command. Please >>> refer the >>> doc: >>> >>> https://source.tizen.org/documentation/developer-guide/creating-tize >>> n >>> - >>> image-scratch >>> https://source.tizen.org/documentation/developer-guide/creating-tize >>> n >>> - >>> image >>> >>> thanks >>> - jf.ding >>> >>> On Wed, Apr 02, 2014 at 04:40:49PM +0530, Suresh Kanzariya wrote: >>>> Hi Stephane, >>>> >>>> Thanks for the information. >>>> >>>> I will change the gbs.conf file pointing to Tizen:Generic and will >>>> try to build the image. >>>> >>>> One more thing, Suppose I want to build Tizen image for mobile >>>> then I need to sync the mobile repo and also need to change my >>>> gbs.conf file pointing to Tizen:mobile, Right? >>>> >>>> Waiting for my repo sync to finish up ! :) >>>> >>>> >>>> On 4/2/14, Stéphane Desneux >>>> <[email protected]<mailto:[email protected]>> >>>> wrote: >>>> > Hi Suresh, >>>> > >>>> > From the command you pasted in your message, I see that: >>>> > - you clone Tizen:Generic (repo init ... -m generic.xml) >>>> > - but your GBS conf points to Tizen:Mobile snapshots >>>> > >>>> > This will probably fail at build time. >>>> > >>>> > Another point: the manifest files in scm/manifest are not up to >>>> > date. I think that after "repo init", you'll have to replace the >>>> > generic.xml file with a manifest coming from snapshots, for example: >>>> > http://download.tizen.org/snapshots/tizen/generic/generic-wayland >>>> > - >>>> > x >>>> > 86_64/tizen_20140331.9/builddata/manifest/tizen_20140331.9_x86_64. >>>> > x >>>> > ml >>>> > >>>> > And finally, AFAIK, you're supposed to run "gbs build" in the >>>> > same directory as "repo sync". >>>> > >>>> > -- >>>> > Stéphane Desneux >>>> > Intel OTC - Vannes/FR >>>> > gpg:1CA35726/DFA9B0232EF80493AF2891FA24E3A2841CA35726 >>>> > >>>> > On 01/04/2014 19:04, Suresh Kanzariya wrote: >>>> >> Hi, >>>> >> >>>> >> Before I have build individual package for Tizen, now I Need >>>> >> expert advise to build tizen image. >>>> >> >>>> >> I am following below link. >>>> >> https://source.tizen.org/documentation/developer-guide/cloning-t >>>> >> i >>>> >> z >>>> >> en-source >>>> >> >>>> >> Here are my command >>>> >> cd /data/TizenProject >>>> >> >>>> >> repo init -u >>>> >> ssh://<username>@review.tizen.org:29418/scm/manifest >>>> >> -b tize n -m generic.xml >>>> >> >>>> >> repo sync >>>> >> >>>> >> Now in order to build the image from where should I apply gbs >>>> >> build command? (i.e. from TizenProject dir), And 'gbs build' >>>> >> will build the complete image or is there any other method? >>>> >> >>>> >> >>>> >> >>>> >> Here are content from my gbs.conf file. I am not able to attach >>>> >> the file so pasted it here !! >>>> >> >>>> >> [general] >>>> >> #Current profile name which should match a profile section name >>>> >> profile = profile.tizen tmpdir = /var/tmp buildroot = >>>> >> /data/GBS-ROOT/ packaging_branch = master >>>> >> >>>> >> >>>> >> [profile.tizen] >>>> >> #Common authentication info for whole profile #user = >>>> >> #CAUTION: please use the key name "passwd" to reset plaintext >>>> >> password #passwd = obs = obs.tizen #Comma separated list of >>>> >> repositories repos = repo.tizen_latest #repos = repo.tizen_main, >>>> >> repo.tizen_base >>>> >> >>>> >> [obs.tizen] >>>> >> #OBS API URL pointing to a remote OBS. >>>> >> url = https://api.tizen.org >>>> >> #Optional user and password, set if differ from profile's user >>>> >> and password #user = #passwd = >>>> >> >>>> >> #Repo section example >>>> >> [repo.tizen_latest] >>>> >> #Build against repo's URL >>>> >> url = http://download.tizen.org/snapshots/tizen/mobile/latest/ >>>> >> #Optional user and password, set if differ from profile's user >>>> >> and password #user = #passwd = >>>> >> >>>> >> #Individual repo is also supported #[repo.tizen_base] #url = >>>> >> http://download.tizen.org/releases/daily/trunk/ivi/latest/repos/ >>>> >> b >>>> >> a >>>> >> se/ia32/packages/ >>>> >> #[repo.tizen_main] >>>> >> #url = >>>> >> http://download.tizen.org/releases/daily/trunk/ivi/latest/repos/ >>>> >> i >>>> >> v >>>> >> i/ia32/packages/ >>>> >> >>>> >> Thank you. >>>> >> -Suresh >>>> >> _______________________________________________ >>>> >> Dev mailing list >>>> >> [email protected]<mailto:[email protected]> >>>> >> https://lists.tizen.org/listinfo/dev >>>> >> >>>> > _______________________________________________ >>>> > Dev mailing list >>>> > [email protected]<mailto:[email protected]> >>>> > https://lists.tizen.org/listinfo/dev >>>> > >>>> _______________________________________________ >>>> Dev mailing list >>>> [email protected]<mailto:[email protected]> >>>> https://lists.tizen.org/listinfo/dev >>> >> >
_______________________________________________ Dev mailing list [email protected] https://lists.tizen.org/listinfo/dev
