Hi Leon, Andreas,
I just tried the sleep command, but still failed. Is it possible that some
files related to weston or wayland cannot be accessed at the booting phase
since they were built by myself?
Best regards,
Alex
2015-08-13 16:23 GMT+08:00 Leon Anavi <leon.an...@konsulko.com>:
> Hi Andreas, Alex,
>
> On 13.08.2015 11:19, Andreas Brauchli wrote:
>
> Hey Alex,
>
> As potential (and hacky) workaround you could try delaying the display
> manager with a wrapper script like this
>
> #!/bin/sh
> sleep 10
> ${ExecStartCommand}
>
> replace the last line with the actual ExecStart command
> if that works, you most likely have a dependency/race/timing problem as
> Leon mentioned.
>
> I'm sure there's a more systemdish way to do it (timers?) but I'm not an
> expert there and it's a workaround anyway.
>
> No need to do a wrapper script. In systemd service you can achieve the
> same using ExecStartPre. Please check systemd documentation for details:
> http://www.freedesktop.org/software/systemd/man/systemd.service.html
>
> Best regards,
> Leon
>
>
>
> cheers,
> andreas
>
> On Don, 2015-08-13 at 10:34 +0300, Leon Anavi wrote:
>
> Hi Alex,
>
> On 13.08.2015 10:30, chengxuan liu wrote:
>
>
> Hi, Leon,
>
> I did use the same command in the ExecStart element of systemd
> service display-manager-run. That is why i am confused.
>
>
> It might be a race condition with systemd services. I recommend you to
> use journalctl to check systemd logs and systemd-analyze to view
> system boot-up statistics. Both tools are very convenient for
> debugging systemd issues.
>
> Best regards,
> Leon
>
>
>
> Thanks
>
> Alex
>
>
> 2015-08-13 15:11 GMT+08:00 Leon Anavi <leon.an...@konsulko.com>
> <leon.an...@konsulko.com>:
> Hi Alex,
>
> On 13.08.2015 10:07, chengxuan liu wrote:
>
> > I am using Tizen 3.0 Common and the profile is wayland32.
> Just to clarify: in this case the tizen version is 3.0 and
> the profile is called Common.
> > Mali DDK has been installed indeed. I wonder why it can
> > not start up when the system boots up. Every time I have
> > to start the weston manually.
> >
> If you are able to start it manually then just use the same
> command and adjust ExecStart of systemd service
> display-manager-run.
>
> Best regards,
> Leon
>
> >
> >
> > Best regards.
> >
> > Alex
> >
> >
> >
> > 2015-08-13 14:28 GMT+08:00 Leon Anavi
> > <leon.an...@konsulko.com> <leon.an...@konsulko.com>:
> > Hi Alex,
> >
> > On 13.08.2015 08:48, chengxuan liu wrote:
> >
> > > Hi, Leon
> > >
> > > The target device I use is exynos OdroidX2. The
> > > weston.log is like the following:
> > > [20:07:37.799] weston 1.7.0
> > > http://wayland.freedesktop.org
> > > Bug reports to:
> > >
> https://bugs.freedesktop.org/enter_bug.cgi?product=Wayland&component=weston&version=1.7.0
> > > Build: unknown (not built from
> > > git or tarball)
> > > [20:07:37.815] OS: Linux, 3.10.60-dirty, #86 SMP
> > > PREEMPT Thu Jul 23 14:18:11 CST 2015, armv7l
> > > [20:07:37.815] warning: XDG_RUNTIME_DIR
> > > "/run/display" is not configured
> > > correctly. Unix access mode must be 0700
> > > (current mode is 770),
> > > and must be owned by the user (current owner is
> > > UID 381).
> > > Refer to your distribution on how to get it, or
> > >
> http://www.freedesktop.org/wiki/Specifications/basedir-spec
> > > on how to implement it.
> > > [20:07:37.860] Using config file
> > > '/etc/xdg/weston/weston.ini'
> > > [20:07:37.875] Loading module
> > > '/usr/lib/weston/drm-backend.so'
> > > [20:07:38.061] initializing drm backend
> > > [20:07:38.089] fatal: drm backend should be run
> > > using weston-launch binary or as root
> > > [20:07:38.089] fatal: failed to create
> > > compositor
> > >
> > >
> > > The UID 381 corresponds to the display user. And
> > > if i use the original weston within the tizen
> > > image, the weston is ok.
> > >
> > > Any ideas?
> > >
> >
> > Which Tizen image and profile are you using?
> >
> > Have you installed Mali DDK for hardware graphics
> > acceleration in Wayland and Weston?
> >
> > You can find its version for Tizen 3.0 here:
> > https://source.tizen.org/mali-ddk-tizen-3.0-wayland-enabled
> > As far as I remember this Mali DDK was appropriate
> > for Odroid-U3 which seems to have the same SoC,
> > Exynos 4412, as Odroid-X2.
> >
> > Alternatively, without hardware graphics
> > acceleration, you can try starting weston with
> > frame buffer support using the following
> > configuration for its backend:
> > --backend=fbdev-backend.so In this case Weston
> > should work but Crosswalk and HTML5 applications
> > will not work.
> >
> > Best regards,
> > Leon
> >
> > P.S. Always keep the address of the mailing list
> > in CC. This way the discussion is transparent and
> > more people can get involved.
> >
> > > Thanks
> > >
> > > Alex
> > >
> > >
> > > 2015-08-13 13:36 GMT+08:00 Leon Anavi
> > > <leon.an...@konsulko.com> <leon.an...@konsulko.com>:
> > > Hi Alex,
> > >
> > > On 13.08.2015 06:31, chengxuan liu
> > > wrote:
> > > Hi,
> > > recently I compiled the Wayland
> > > and Weston source on the Tizen
> > > environment and installed them
> > > then. However, the Weston could
> > > not be launched automatically
> > > when the system booted up. And
> > > if i launched it manually, it
> > > was ok. So, I think it may be
> > > the authority problem. Has
> > > anyone encountered this?
> > >
> > > And i used the systemctl to
> > > check the
> > > display-manager-run.service,got
> > > the following information:
> > >
> > > * display-manager-run.service -
> > > Weston display daemon
> > > Loaded: loaded
> > >
> (/usr/lib/systemd/system/display-manager-run.service; enabled; vendor preset:
> enabled)
> > > Active: activating
> > > (auto-restart) (Result:
> > > exit-code) since Wed 2015-08-12
> > > 20:27:01 PDT; 6s ago
> > > Process: 1673
> > > ExecStart=/bin/sh -c
> > > backend=drm ; [ -d /dev/dri ] ||
> > > backend=fbdev ;
> > > exec /usr/bin/weston --backend=
> > > $backend-backend.so -i0
> > > --log=/run/%u/weston.log
> > > (code=exited, status=1/FAILURE)
> > > Main PID: 1673 (code=exited,
> > > status=1/FAILURE)
> > > Memory: 0B
> > >
> > > CGroup:
> /system.slice/display-manager-run.service
> > >
> > >
> > > According to the status of
> > > display-manager-run.service weston fails
> > > to start. Check weston.log for details.
> > > It might be something related to the
> > > hardware graphics acceleration.
> > >
> > > On what device are you trying to run
> > > Tizen and Weston?
> > >
> > > Best regards,
> > > Leon
> > >
> > > --
> > > Leon Anavi
> > > Software Engineer
> > > konsulko.com
> > >
> > >
> > >
> >
> > --
> > Leon Anavi
> > Software Engineer
> > konsulko.com
> >
> >
>
> --
> Leon Anavi
> Software Engineer
> konsulko.com
>
> --
> Leon Anavi
> Software Engineerkonsulko.com
>
> ________________________________
> Confidentiality: The information contained in this email message and all
> attachments transmitted with it is legally privileged and confidential
> information intended only for the use of the addressee. If you have received
> this email in error, please immediately notify us and delete this email and
> any attachments from your system. Thank you.
>
>
> --
> Leon Anavi
> Software Engineerkonsulko.com
>
>
_______________________________________________
Dev mailing list
Dev@lists.tizen.org
https://lists.tizen.org/listinfo/dev
