Dear Mr. Inki-Dae,
Thank you very much for your reply.
Yes, I am already aware about Tizen Yocto image for raspberry pi. I have already tried it and I can boot successfully till the desktop/display screen.
Due to the firewall restrictions (and PC space limits), I cannot build the Yocto image.
So, I tried with the pre-build images, but, I am not getting any output on the virtual terminal by connecting an HDMI to my computer monitor (tty1).
Unfortunately, I don't have a serial UART cable right now (for raspberry pi), so I haven't tried it yet using UART.
Also, at this moment, I don't want the graphical display (for my use case), so I just want to drop it to console and execute some commands.
Moreover, I wanted to start things from scratch using the existing Tizen images either from common profile or others.
Please let me know which image to choose.
Also, let me know, how to enable virtual console on Tizen (using systemd?)
Thank You!
With Regards,
Pintu Kumar
------- Original Message -------
Sender : In-Ki Dae<[email protected]> S5/Senior Engineer/Tizen Platform Lab./Samsung Electronics
Date : Mar 10, 2016 09:47 (GMT+05:30)
Title : Re: [Dev] Tizen common profile porting on new h/w
Hi,
2016년 03월 10일 12:31에 PINTU KUMAR 이(가) 쓴 글:
> Hi,
>
> I wanted to port Tizen platform in one of the ARM based open hardware such as BeagleBone, Raspberry Pi.
> So, I thought, I will start with the Tizen 3.0 common profile and create my own custom profile.
>
> But, when I see, in http://download.tizen.org/ there are so many Tizen images available.
> I am really confused which one to choose. There is no clear documentation which explains about it.
>
> So, I tried one of the images from:
> http://download.tizen.org/snapshots/tizen/common/
> http://download.tizen.org/snapshots/tizen/common/latest/images/arm-wayland/
> http://download.tizen.org/snapshots/tizen/common/latest/images/arm-wayland/common-wayland-3parts-armv7l-odroidu3/ (tizen-common_20160309.1_common-wayland-3parts-armv7l-odroidu3.tar.gz)
>
> Because, I just need the rootfs.img, system-data.img, user.img (only the Tizen platform).
> I already have my own boot loader and Linux Kernel (Raspberry Pi).
>
> Now, my questions are as follows:
>
> 1) Am I using the correct image to create a new profile? Will it work for me?
>
> 2) When I try to boot the image on Raspberry Pi, I am not able to get the Login prompt on my virtual terminal (tty1).
> Please let me know what changes are required to get the login prompt?
>
> Note: I have made the required changes in Kernel (as per Tizen) but disabled DRM (as I am not interested in Display).
> Like, I have already enabled SMACK in kernel.
>
> 3) If I am not using the correct image, please point me to the right image, to start with.
>
I believe below link could provide what you need for Tizen porting,
https://wiki.tizen.org/wiki/RaspberryPi
Thanks,
Inki Dae
>
>
>
> Regards,
> Pintu
> _______________________________________________
> Dev mailing list
> [email protected]
> https://lists.tizen.org/listinfo/dev
>
>
|
|
_______________________________________________ Dev mailing list [email protected] https://lists.tizen.org/listinfo/dev
