I have spent some time recently reviewing this discussion and the feature branch that Simon put out. I think this is an important feature and want to move it forward. I started another discussion on adding Knox to our stack but this discussion has a lot of good context so I will continue it here.
I think the main point of contention was that this feature branch included several different architectural changes and it was unclear if they were needed and if so, could be done separately. Fortunately LDAP authentication has been accepted into master so we can cross it off the list. From my understanding of the points people have made, that leaves Knox related SSO changes and migrating expressjs to a different, JVM-based web server that includes proxying capabilities (Zuul). I think everyone agrees that if we can limit the scope to just Knox related SSO changes that would be ideal. I believe I have found a way to do that while working on a small POC this week. The key to this (Simon alluded to it earlier) is to put both REST and our UIs behind Knox. I initially was focused on just adding REST as a service in Knox and decided to experiment with also adding our UIs. After I did this it became clear that this simplifies things considerably: - The REST app and the UIs are now served from the same host so CORS concerns go away. - We no longer need to worry about proxying REST requests from the UIs with express or Zuul because Knox handles that for us. This will make our express configuration even simpler. In fact, all we need is a simple way to serve static UI assets. - We no longer need to check for SSO tokens and redirect in the UI web/app servers (or the REST app for that matter) because Knox handles that for us. - The UIs can now easily access any Knox service (not just our REST app) without any extra proxy configuration. - SSO token authentication is only necessary in REST so there is no need to create shared Spring modules or split functionality out. The most significant change I had to make (borrowed from Simon's feature branch) was the SSO token authentication mentioned above. The primary short term benefit with this approach is that outside of some general deficiencies unrelated to this our UI architecture doesn't need to fundamentally change. I could summarize the changes as: - Knox install and configuration (setting up REST and the alerts UI as Knox services) - Added Knox SSO token authentication to REST - Updated REST urls in the UI code (should be configurable) - Fixed a few UI bugs where relative paths were not being used - Added a ng build option to build the UI with base href set to Knox base path ( https://github.com/angular/angular-cli/wiki/build#base-tag-handling-in-indexhtml ) Most the UI changes are preexisting, minor issues that could be fixed directly in master. We would need to think of an approach for the base href build requirement but I'm sure it's not that bad. However there will be some backwards compatibility issues we would need to think through. I think it will be a challenge exposing the UIs through both the Knox url and legacy urls at the same time. I'm also not clear on how one would use Knox with REST set to legacy JDBC-based authentication. As far as I know Knox does not support JDBC so there would be a mismatch between Knox and REST. Knox does have the ability to pass along basic authentication headers so LDAP in REST would work. We could initially make Knox an optional feature that requires setup with the help of some documentation (like Kerberos) while keeping the system the way it is now by default. I imagine we'll deprecate JDBC-based authentication at some point so that may be a good time to switch. What do people think about this approach? Concerns? Are there any huge holes in this I'm not thinking about? I want to highlight that the work Simon did in his feature branch was crucial to better understanding this. I am pretty sure we'll end up reusing a lot code from that branch. On Thu, Sep 27, 2018 at 6:30 PM Michael Miklavcic < michael.miklav...@gmail.com> wrote: > Apparently, I hit send on my last email before finishing my synopsis (per > @Otto's Q in Slack). To summarize, based on my current understanding I > believe that each of the feature branch changes I've outline above are > units of work that are related, yet should be executed on independently. > Knox SSO in its own feature branch. Migrating technologies like NodeJs or > migrating the auth DB to LDAP seem like they belong in their own separate > PR's or feature branches. > > Thanks, > Mike > > On Thu, Sep 27, 2018 at 4:08 PM Casey Stella <ceste...@gmail.com> wrote: > > > I'm coming in late to the game here, but for my mind a feature branch > > should involve the minimum architectural change to accomplish a given > > feature. > > The feature in question is SSO integration. It seems to me that the > > operative question is can we do the feature without making the OTHER > > architectural change > > (e.g. migrating from expressjs to spring boot + zuul). I would argue > that > > if we WANT to do that, then it should be a separate feature branch. > > > > Thus, I leave with a question: is there a way to accomplish this feature > > without ripping out expressjs? > > > > - If so and it is feasible, I would argue that we should decouple this > > into a separate feature branch. > > - If so and it is infeasible, I'd like to hear an argument as to the > > infeasibility and let's decide given that > > - If it is not possible, then I'd argue that we should keep them > coupled > > and move this through as-is. > > > > On a side-note, it feels a bit weird that we're narrowing to a bundled > > proxy, rather than having that be a pluggable thing. I'm not super > > knowledgeable in this space, so I apologize > > in advance if this is naive, but isn't this a pluggable, external > component > > (e.g. nginx)? > > > > On Thu, Sep 27, 2018 at 5:05 PM Michael Miklavcic < > > michael.miklav...@gmail.com> wrote: > > > > > I've spent some more time reading through Simon's response and the > added > > > sequence diagram. This is definitely helpful - thank you Simon. > > > > > > I need to redact my initial list: > > > > > > 1. Node migrated to Spring Boot, expressjs migrated to a > > > non-JS/non-NodeJs proxying mechanism (ie Zuul in this case) > > > 2. JDBC removed completely in favor of LDAP > > > 3. Knox/SSO > > > > > > I'm a bit conflicted on the best way to move forward and would like > some > > > thoughts from other community members on this. I think an argument can > be > > > made that 1 and 2 are independent of 3, and should/could really be > > > independent PR's against master. > > > > > > The need for a replacement for expressjs (Zuul in this case) is an > > artifact > > > that our request/response cycle for REST calls is a simple matter of > > > forwarding with some additional headers for authentication. There's a > > > JSESSIONID managed by the client browser in our current architecture, > for > > > example. You login to the alerts or the management UI which forwards a > > > request to REST, which looks up credentials in a backend database, and > > > passes the results back up the chain. All browser requests go directly > to > > > the specific UI you're working with - this is the CORS problem. You > > can't, > > > without some effort with headers for adding other domains to the safe > > list > > > or disabling the security check for CORS, make remote calls directly to > > > REST. That's why we proxy. Switching over to Spring Boot leaves a gap > > with > > > expressjs having handled the proxying and filtering, since it's only > > > available to a NodeJs application (it's server-side javascript vs the > > > client side javascript deployed via our Angular applications). Enter > > Zuul, > > > which now effectively handles that. At runtime, Zuul is a part of the > > > Spring app that serves up our UI's. It handles the requests via > > filtering, > > > forwards them to REST, manages the response back to the client. Very > > > similar to what expressjs was doing, per my current understanding. The > > > sequence diagrams Simon added are useful, and I think some of what was > > less > > > clear was what we currently vs what the new changes are doing to the > > > architecture. This is no fault of Simon's - there simply wasn't any > > > architecture diagrams/documents around this before. Here's my > impression > > of > > > the very very basic current state - someone more familiar with this > > > architecture please advise if I'm incorrect about anything (probably > > Ryan). > > > > > > https://imgur.com/f8GtSmh > > > > > > Zuul would be replacing the bit about expressjs in the diagram, and > > instead > > > of node we have spring boot. This covers 1. 2 and 3 are other issues. > I'd > > > like to see similar exposition of those server processes with knox > > > involved. I imagine in that case we bump up from 3 to 4 server > instances > > > for the additional knox endpoint. > > > > > > Mike > > > > > > > > > > > > > > > > > > On Wed, Sep 19, 2018 at 11:28 AM James Sirota <jsir...@apache.org> > > wrote: > > > > > > > Thank you, Simon. The diagrams help a lot > > > > > > > > 19.09.2018, 21:27, "Simon Elliston Ball" < > si...@simonellistonball.com > > >: > > > > > To clarify some of this I've put some documentation into > > > > > https://github.com/apache/metron/pull/1203 under METRON-1755 ( > > > > > https://issues.apache.org/jira/browse/METRON-1755). Hopefully the > > > > diagrams > > > > > there should make it clearer. > > > > > > > > > > Simon > > > > > > > > > > On Tue, 18 Sep 2018 at 14:17, Simon Elliston Ball < > > > > > si...@simonellistonball.com> wrote: > > > > > > > > > >> Hi Mike, > > > > >> > > > > >> Some good points here which could do with some clarification. I > > > suspect > > > > >> the architecture documentation could be clearer and fill in some > of > > > > these > > > > >> gaps, and I'll have a look at working on that and providing some > > > > diagrams. > > > > >> > > > > >> The short version is that the Zuul proxy gateway has been added > to > > > > replace > > > > >> the Nodejs express proxy used to gateway the REST api calls in > the > > > > current > > > > >> hosts. This is done in both cases to avoid CORS restrictions by > > > > allowing > > > > >> the same host that serves the UI files to proxy call to the API. > > > > >> > > > > >> The choice of Zuul was partly a pragmatic one (it's the one > that's > > > > there > > > > >> in the box as it were with Spring Boot, which we use for the REST > > > API, > > > > via > > > > >> the Spring Cloud Netflix project which wraps a bunch of related > > > pieces > > > > into > > > > >> Spring). The choice of Spring Boot to host the UIs themselves was > > > > similarly > > > > >> for parity with the REST host, to simplify the stack (we remove > the > > > > >> occasionally problematic need to install nodejs on target > servers, > > > > which is > > > > >> outside of the regular OS and HDP stacks we support). > > > > >> > > > > >> Arguably, the Zuul proxy is not necessary if we force everything > > > > through a > > > > >> Knox instance, since Knox would provide a single endpoint. We > > > probably > > > > >> however don't want to force Knox and SSL, hence using Zuul to > keep > > it > > > > >> closer to our current architecture. Zuul does some other nice > > things, > > > > which > > > > >> might help us in future, so it's really about laying down some > > > options > > > > for > > > > >> potentially doing micro-services style things at a later date. > I'm > > > not > > > > >> saying we have to, or even should go that way, it will just make > > life > > > > >> easier later if we decide to. It will also help us if we want to > > add > > > > HA, > > > > >> circuit breaking etc to the architecture at a later date. That > > said, > > > I > > > > >> regret that I ever said the word micro-services, since it's > caused > > > > >> confusion. Just think of it as a proxy to deal with the CORS > > problem. > > > > >> > > > > >> Zuul is implemented as a set of filters, but we are not using it > > for > > > > its > > > > >> authentication filtering. We're using it as a proxy. Shiro is an > > > > >> authentication framework, and could arguably used to provide the > > > > security > > > > >> piece, but frankly wrapping shiro as a replacement for Spring > > > Security > > > > in a > > > > >> Spring application seemed like it will make life a lot harder. > This > > > > could > > > > >> be done, but it's not the native happy path, and would pull in > > > > additional > > > > >> dependencies that duplicate functionality that's already embedded > > in > > > > Spring > > > > >> Security. > > > > >> > > > > >> The version of Knox used is the default from HDP. The link > version > > > you > > > > >> mention is a docs link. I'll update it to be the older version, > > which > > > > is > > > > >> the same and we can decide if we want to maintain the freshness > of > > it > > > > when > > > > >> we look to upgrade underlying patterns. Either way, the content > is > > > the > > > > >> same. > > > > >> > > > > >> I did consider other hosting mechanisms, including Undertow a > > > > >> > > > > >> If you have a different suggestion to using the Spring default > ways > > > of > > > > >> doing things, or we want to use a framework other than Spring for > > > this, > > > > >> then maybe we could change to that, but the route chosen here is > > > > definitely > > > > >> the easy path in the context of the decision made to use Spring > in > > > > metron > > > > >> rest, and if anything opens up our choices while minimising, in > > fact > > > > >> reducing, our dependency management overhead. > > > > >> > > > > >> I hope that explains some of the thinking behind the choices > made, > > > but > > > > the > > > > >> guiding principals I followed were: > > > > >> * Don't fight the framework if you don't have to > > > > >> * Reduce the need for additional installation pieces and third > > party > > > > repos > > > > >> * Minimize dependencies we would have to manage > > > > >> * Avoid excessive change of the architecture, or forcing users to > > > adopt > > > > >> Knox if they didn't want the SSL overhead. > > > > >> > > > > >> Simon > > > > >> > > > > >> On Tue, 18 Sep 2018 at 02:46, Michael Miklavcic < > > > > >> michael.miklav...@gmail.com> wrote: > > > > >> > > > > >>> Thanks for the write-up Ryan, this is a great start. I have some > > > > further > > > > >>> questions based on your feedback and in addition to my initial > > > thread. > > > > >>> > > > > >>> Just for clarification, what version of Knox are we using? HDP > > > 2.6.5, > > > > >>> which > > > > >>> is what we currently run full dev against, supports 0.12.0. > > > > >>> > > > > >>> > > > > > > > > > > https://docs.hortonworks.com/HDPDocuments/HDP2/HDP-2.6.5/bk_release-notes/content/comp_versions.html > > > > >>> . > > > > >>> I see references to Knox 1.1.0 (latest) in this committed PR - > > > > >>> > > > > >>> > > > > > > > > > > https://github.com/apache/metron/pull/1111/files#diff-70b412194819f3cb829566f05d77c1a6R122 > > > > >>> . > > > > >>> This is probably just a super small mismatch, and it probably > goes > > > > without > > > > >>> saying, but I just want to be doubly sure that we're installing > > the > > > > >>> default > > > > >>> via the standard install mechanism as opposed to something > > separate > > > > and > > > > >>> manual. > > > > >>> > > > > >>> On the subject of Zuul wrt Nodejs filters. I'd like to hear some > > > more > > > > >>> detail on: > > > > >>> > > > > >>> 1. Why do we need filtering via Zuul? For instance, is > > filtering > > > > >>> routing > > > > >>> not handled by Knox? From the beginner docs: "The gateway > > itself > > > > is a > > > > >>> layer > > > > >>> over an embedded Jetty JEE server. At the very highest level > > the > > > > >>> gateway > > > > >>> processes requests by using request URLs to lookup specific > JEE > > > > Servlet > > > > >>> Filter chain that is used to process the request. The gateway > > > > framework > > > > >>> provides extensible mechanisms to assemble chains of custom > > > filters > > > > >>> that > > > > >>> support secured access to services." [1] > > > > >>> 2. What other library options were considered for this > feature > > > and > > > > how > > > > >>> was it chosen over the others? I search on "apache spring web > > > > filters" > > > > >>> and > > > > >>> it's almost all about Shiro - > > > https://shiro.apache.org/spring.html. > > > > I > > > > >>> also see quite a bit about filtering for Spring Boot > > applications > > > > along > > > > >>> with a write-up of how to accomplish the same with Web MVC > > here - > > > > >>> > > > > >>> > > > > > > > > > > https://stackoverflow.com/questions/19825946/how-to-add-a-filter-class-in-spring-boot > > > > >>> . > > > > >>> The Knox documentation boilerplate examples are also using > > Shiro. > > > > >>> "shiro.ini - The configuration file for the Shiro > > authentication > > > > >>> provider’s > > > > >>> filters. This information is derived from the information in > > the > > > > >>> provider > > > > >>> section of the topology file." [1] > > > > >>> > > > > >>> My assumption is that there are deliberate decisions in favor of > > > this > > > > mix > > > > >>> of technologies over others, and I think some additional > > explanation > > > > will > > > > >>> make that clear. As it stands per the Knox documentation, it > looks > > > > like > > > > >>> we're going on a different route from the preferred/recommended > > > > idioms. > > > > >>> > > > > >>> [1] > > > > >>> > > > > >>> > > > > > > > > > > http://knox.apache.org/books/knox-0-12-0/dev-guide.html#Architecture+Overview > > > > >>> > > > > >>> Ryan, I agree about microservices. This should not derail nor > be a > > > > major > > > > >>> part of discussion around this feature, imho. I think there's > > quite > > > a > > > > bit > > > > >>> left to discuss on that subject. I want to make sure that we're > > not > > > > >>> prematurely favoring architectural choices by pulling in > libraries > > > > that > > > > >>> are > > > > >>> potentially opinionated about how to accomplish those goals. If > > they > > > > are, > > > > >>> I > > > > >>> would expect we are comfortable ripping those libraries out if > the > > > > >>> community favors a different direction. > > > > >>> > > > > >>> On the subject of Spring Boot vs Nodejs. I can see some > rationale > > > for > > > > >>> making things homogenous (though, in a microservices > architecture, > > > if > > > > we > > > > >>> go > > > > >>> that route, that's not strictly necessary), but what is the > > > > justification > > > > >>> for Spring Boot over Nodejs? Why would want one over the other? > > > > >>> > > > > >>> On Mon, Sep 17, 2018 at 3:38 PM Ryan Merriman < > > merrim...@gmail.com> > > > > >>> wrote: > > > > >>> > > > > >>> > I have reviewed a couple different PRs so I'll add some > context > > > > where I > > > > >>> > can. Obviously Simon would be the most qualified to answer but > > > I'll > > > > >>> add my > > > > >>> > thoughts. > > > > >>> > > > > > >>> > For question 1, while they may not all be necessary I think it > > > does > > > > make > > > > >>> > sense to include them in this feature branch if our primary > goal > > > is > > > > >>> > integrating Knox SSO. We could push off removing JDBC > > > authentication > > > > >>> for > > > > >>> > reasons I'll get to in my response to question 2. If we want > to > > do > > > > one > > > > >>> at > > > > >>> > a time (switch to spring boot, add Zuul as a dependency, then > > add > > > > Knox > > > > >>> SSO) > > > > >>> > then that's ok but I do think there are dependencies and > should > > be > > > > done > > > > >>> in > > > > >>> > order. For example, adding Knox SSO requires some work around > > > > request > > > > >>> > filtering. If we were to do this before moving to Spring Boot > we > > > > would > > > > >>> > need to implement the filters in Nodejs which would be > throwaway > > > > once we > > > > >>> > get around to migrating away from that. For Zuul, I believe > it's > > > > >>> purpose > > > > >>> > is to facilitate the filtering (although it does a lot more) > so > > it > > > > >>> doesn't > > > > >>> > make sense to add that separate from the Knox SSO work. > > > > >>> > > > > > >>> > For question 2, I think you bring up a good point. We probably > > > don't > > > > >>> want > > > > >>> > to just rip our current authentication method out. We might > want > > > to > > > > >>> > consider deprecating it instead and making Knox SSO and LDAP > > > > >>> authentication > > > > >>> > optional. > > > > >>> > > > > > >>> > For question 3, this is a bigger shift than just a component > > > > upgrade. > > > > >>> It's > > > > >>> > more like shifting platforms, from Elasticsearch to Solr for > > > > example. > > > > >>> Like > > > > >>> > I alluded to in my response to question 1, I don't think we > > should > > > > >>> require > > > > >>> > throwaway work just because we want to review these parts > > > > separately. > > > > >>> > > > > > >>> > For question 4, I will defer to Simon. I don't believe we > > > > necessarily > > > > >>> > require Zuul so I will let him elaborate on why he choose that > > > > library > > > > >>> and > > > > >>> > what the potential impact is of adding it to our project. > > > > >>> > > > > > >>> > For question 5 and 6, I will also defer to Simon on this. The > > > focus > > > > of > > > > >>> > this feature as I understand it is a consistent authentication > > > > mechanism > > > > >>> > and support for SSO. I will let him lay out his vision for > micro > > > > >>> services. > > > > >>> > > > > > >>> > Knox SSO would be a great improvement and is what I think we > > > should > > > > >>> focus > > > > >>> > on in this feature branch. Micro services is something we > should > > > > >>> certainly > > > > >>> > discuss but it might be a bit of a distraction and I wouldn't > > want > > > > to > > > > >>> hold > > > > >>> > up the other useful parts. > > > > >>> > > > > > >>> > On Fri, Sep 14, 2018 at 8:38 PM Michael Miklavcic < > > > > >>> > michael.miklav...@gmail.com> wrote: > > > > >>> > > > > > >>> > > Hey all, > > > > >>> > > > > > > >>> > > I started looking through the Knox SSO feature branch (see > > here > > > > >>> > > https://issues.apache.org/jira/browse/METRON-1663). This is > > > some > > > > >>> great > > > > >>> > new > > > > >>> > > security functionality work and it looks like it will bring > > some > > > > >>> > important > > > > >>> > > new features to the Metron platform. I'm coming at this > pretty > > > > green, > > > > >>> so > > > > >>> > I > > > > >>> > > do have some questions regarding the proposed changes from a > > > high > > > > >>> level > > > > >>> > > architectural perspective. There are a few changes within > the > > > > current > > > > >>> FB > > > > >>> > > PR's that I think could use some further explanation. At > first > > > > >>> glance, it > > > > >>> > > seems we could potentially simplify this branch a great deal > > and > > > > get > > > > >>> it > > > > >>> > > completed much sooner if we narrowed the focus a bit. But I > > > could > > > > >>> > certainly > > > > >>> > > be wrong here and happy for other opinions. I searched > through > > > the > > > > >>> > mailing > > > > >>> > > list history to see if there is any additional background > and > > > the > > > > main > > > > >>> > > DISCUSS thread I could find was regarding initially setting > up > > > the > > > > >>> > feature > > > > >>> > > branch, which talked about adding Knox and LDAP. > > > > >>> > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > > > > > > > https://lists.apache.org/thread.html/cac2e6314284015b487121e77abf730abbb7ebec4ace014b19093b4c@%3Cdev.metron.apache.org%3E > > > > >>> > > . > > > > >>> > > If I've missed any follow-up, please let me know. > > > > >>> > > > > > > >>> > > Looking at the broader set of Jiras associated with 1663 and > > the > > > > >>> first PR > > > > >>> > > 1665, it looks like there are 4 main thrusts of this branch > > > right > > > > now: > > > > >>> > > > > > > >>> > > 1. Knox/SSO > > > > >>> > > 2. Node migrated to Spring Boot > > > > >>> > > 3. JDBC removed completely in favor of LDAP > > > > >>> > > 4. Introduction of Zuul, also microservices? > > > > >>> > > > > > > >>> > > I strongly urge for the purpose of reviewing this feature > > branch > > > > that > > > > >>> we > > > > >>> > > base much of the discussion off of > > > > >>> > > https://issues.apache.org/jira/browse/METRON-1755, the > > > > architecture > > > > >>> > > diagram. Minimally, an explanation of the current > architecture > > > > along > > > > >>> with > > > > >>> > > discussion around the additional proposed changes and > > rationale > > > > would > > > > >>> be > > > > >>> > > useful for evaluation. I don't have a solid enough > > understanding > > > > yet > > > > >>> of > > > > >>> > the > > > > >>> > > full scope of changes and how they differ from the existing > > > > >>> architecture > > > > >>> > > just from looking at the PR's alone. > > > > >>> > > > > > > >>> > > 1. The first question is a general one regarding the > necessity > > > of > > > > >>> the > > > > >>> > 3 > > > > >>> > > additional features alongside Knox - migrating Node to > Spring > > > > Boot, > > > > >>> > > removing JDBC altogether, adding dependencies on Netflix's > > Zuul > > > > >>> > > framework. > > > > >>> > > Are these necessary for adding Knox/SSO? They seem like > > > > potentially > > > > >>> > > separate features, imo. > > > > >>> > > 2. It looks like LDAP will be a required component for > > > interacting > > > > >>> > with > > > > >>> > > Metron via the UI's. I see this PR > > > > >>> > > https://github.com/apache/metron/pull/1186 which removes > JDBC > > > > >>> > > authentication. Are we ready to remove it completely or > would > > it > > > > be > > > > >>> > > better > > > > >>> > > to leave it as a minimal installation option? What is the > > > proposed > > > > >>> > > migration path for existing users? Do we feel comfortable > > > > requiring > > > > >>> > that > > > > >>> > > all installations, including full dev, install and configure > > > LDAP? > > > > >>> For > > > > >>> > > comparison, in the PCAP feature branch we discussed removing > > the > > > > >>> > > existing > > > > >>> > > PCAP REST application in the initial discussion, got > > agreement, > > > > and > > > > >>> > > later > > > > >>> > > removed it in the course of working on the feature branch. > The > > > PR > > > > >>> is > > > > >>> > > fairly > > > > >>> > > clear, however I think we're just missing some basic > > discussion > > > > >>> around > > > > >>> > > the > > > > >>> > > implications, as I've outlined above. Some additional > relevant > > > > >>> > > discussion > > > > >>> > > occurred on this PR > > https://github.com/apache/metron/pull/1112 > > > > >>> which > > > > >>> > > would be good to summarize for purposes of this overarching > > > > >>> > architecture > > > > >>> > > discussion. > > > > >>> > > 3. Migration from Node to Spring Boot. I believe this is > > already > > > > >>> used > > > > >>> > by > > > > >>> > > the REST application and if anything brings some cohesion to > > our > > > > >>> > server > > > > >>> > > strategy. Strictly speaking, is there a reason this is > > required > > > > for > > > > >>> > > Knox? > > > > >>> > > It seems comparable to a component upgrade, such as moving > > from > > > ES > > > > >>> 2.x > > > > >>> > > to > > > > >>> > > 5.6.x and upgrading Angular 6. > > > > >>> > > 4. Introduction of Netflix's Zuul. > > > > >>> > > https://issues.apache.org/jira/browse/METRON-1665. > > > > >>> > > - > "The UIs currently proxy to the REST API to avoid CORS > > > > >>> issues, > > > > >>> > > this will be achieved with Zuul." > > > > >>> > > - Can we elaborate more on where or how CORS is a problem > with > > > > >>> our > > > > >>> > > existing architecture, how Zuul will help solve that, and > how > > it > > > > >>> > > fits with > > > > >>> > > Knox? Wouldn't this be handled by Knox? Since Larry McCay > > > > >>> chimed in > > > > >>> > > with > > > > >>> > > interest on the original SSO thread about the FB, I'm hoping > > he > > > > >>> is > > > > >>> > > also > > > > >>> > > willing to chime in on this as well. > > > > >>> > > - This looks like it has the potential to be a rather large > > > > >>> piece > > > > >>> > of > > > > >>> > > fundamental infrastructure (as it's also pertinent to > > > > >>> > microservices) > > > > >>> > > to > > > > >>> > > pull into the platform, and I'd like to be sure the > community > > is > > > > >>> > > aware of > > > > >>> > > and is OK with the implications. > > > > >>> > > 5. > "The proposal is to use a spring boot application, > > allowing > > > > >>> us to > > > > >>> > > harmonize the security implementation across the UI static > > > servers > > > > >>> and > > > > >>> > > the > > > > >>> > > REST layer, and to provide a routing platform for later > > > > >>> > microservices." > > > > >>> > > - > > > > >>> > > https://issues.apache.org/jira/browse/METRON-1665. > > > > >>> > > - Microservices is a pretty loaded term. I know there had > been > > > > >>> some > > > > >>> > > discussion a while back during the PCAP feature branch > start, > > > > >>> but I > > > > >>> > > don't > > > > >>> > > recall ever reaching a consensus on it. More detail in this > > > > >>> thread > > > > >>> > - > > > > >>> > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > > > > > > > https://lists.apache.org/thread.html/1db7c6fa1b0f364f8c03520db9989b4f7a446de82eb4d9786055048c@%3Cdev.metron.apache.org%3E > > > > >>> > > . > > > > >>> > > Can we get some clarification on what is meant by > > microservices > > > > >>> > > in the case > > > > >>> > > of this FB and relevant PR's, what that architecture looks > > like, > > > > >>> > and > > > > >>> > > how > > > > >>> > > it's achieved with the proposed changes in this PR/FB? It > > seems > > > > >>> > Zuul > > > > >>> > > is > > > > >>> > > also pertinent to this discussion, but there are many ways > to > > > > >>> > > skin this cat > > > > >>> > > so I don't want to presume - > > > > >>> > > > > > > >>> > > > > > > >>> > > > > > https://blog.heroku.com/using_netflix_zuul_to_proxy_your_microservices > > > > >>> > > 6. Zuul, Spring Boot, and microservices - Closely related to > > > > >>> > point 5 > > > > >>> > > above. It seems that we weren't quite ready for this when it > > was > > > > >>> > > brought up > > > > >>> > > in May, or at the very least we had some concern of what > > > direction > > > > >>> to > > > > >>> > > go. > > > > >>> > > What is the operational impact, mpack impact, and how we > > propose > > > > to > > > > >>> > > manage > > > > >>> > > it with Kerberos, etc.? > > > > >>> > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > > > > > > > https://lists.apache.org/thread.html/c19904681e6a6d9ea3131be3d1a65b24447dca31b4aff588b263fd87@%3Cdev.metron.apache.org%3E > > > > >>> > > > > > > >>> > > There is a lot to like in this feature branch, imo. Great > > > feature > > > > >>> > addition > > > > >>> > > with Knox and SSO. Introduction of LDAP support for > > > > authentication for > > > > >>> > > Metron UI's. Simplification/unification of our server > hosting > > > > >>> > > infrastructure. I'm hoping we can flesh out some of the > > details > > > > >>> pointed > > > > >>> > out > > > > >>> > > above a bit more and get this feature through. Great work so > > > far! > > > > >>> > > > > > > >>> > > Best, > > > > >>> > > Mike Miklavcic > > > > >>> > > > > > > >>> > > > > > >> > > > > >> -- > > > > >> -- > > > > >> simon elliston ball > > > > >> @sireb > > > > > > > > > > -- > > > > > -- > > > > > simon elliston ball > > > > > @sireb > > > > > > > > ------------------- > > > > Thank you, > > > > > > > > James Sirota > > > > PMC- Apache Metron > > > > jsirota AT apache DOT org > > > > > > > > > > > > > >
