Sorry that's a typo. Was meant to be 10. Just fixed 20.01.2017, 13:22, "zeo...@gmail.com" <zeo...@gmail.com>: > -1 (non-binding). > > There appears to be a minor oversight where it goes from Step 9 to Step 14. > > Jon > > On Fri, Jan 20, 2017 at 11:56 AM James Sirota <jsir...@apache.org> wrote: > >> The document is available here: >> https://cwiki.apache.org/confluence/display/METRON/Release+Process >> >> and is also pasted in this email for your convenience >> >> Please vote +1, -1, or 0 for neutral. The vote will be open for 72 hours >> >> Metron Release Types >> There are two types of Metron releases: >> Feature Release (FR) - this is a release that has a significant step >> forward in feature capability and is denoted by an upgrade of the second >> digit >> Maintenance Release (MR) - this is a set of patches and fixes that are >> issued following the FR and is denoted by an upgrade of the third digit >> Release Naming Convention >> Metron build naming convention is as follows: 0.[FR].[MR]. We keep the 0. >> notation to signify that the project is still under active development and >> we will hold a community vote to go to 1.x at a future time >> Initiating a New Metron Release >> Create the MR branch for the previous Metron release by incrementing the >> *third* digit of the previous release like so 0.[FR].[*MR++*]. All patches >> to the previous Metron release will be checked in under the MR branch and >> where it makes sense also under the FR branch. All new features will be >> checked in under the FR branch. >> Creating a Feature Release >> Step 1 - Initiate a discuss thread >> Prior to the release The Release manager should do the following >> (preferably a month before the release): >> Make sure that the list of JIRAs slated for the release accurately >> reflects to reflects the pull requests that are currently in master >> Construct an email to the Metron dev board ( >> dev@metron.incubator.apache.org) which discusses with the community the >> desire to do a release. This email should contain the following: >> The list of JIRAs slated for the release with descriptions (use the output >> of git log and remove all the JIRAs from the last release’s changelog) >> A solicitation of JIRAs that should be included with the next release. >> Users should rate them as must/need/good to have as well as volunteering. >> A release email template is provided here. >> Step 2 - Monitor and Verify JIRAs >> Once the community votes for additional JIRAs they want included in the >> release verify that the pull requests are in before the release, close >> these JIRAs and tag them with the release name. All pull requests and JIRAs >> that were not slated for this release will go into the next releases. The >> release manager should continue to monitor the JIRA to ensure that the >> timetable is on track until the release date. On the release date the >> release manager should message the Metron dev board ( >> dev@metron.incubator.apache.org) announcing the code freeze for the >> release. >> Step 3 - Create the Release Branch and Increment Metron version >> Create an branch for the release (from a repo cloned from >> https://git-wip-us.apache.org/repos/asf/incubator-metron.git). (assuming >> the release is 0.[FR++].0 and working from master): >> git checkout -b Metron_0.[FR++].0 >> git push --set-upstream origin Metron_0.[FR++].0 >> File a JIRA to increment the Metron version to 0.[FR++].0. Either do it >> yourself or have a community member increment the build version for you. >> You can look at a pull request for a previous build to see how this is >> done. METRON-533 - Up the version for release DONE >> Also, the release manager should have a couple of things set up: >> A SVN clone of the repo at >> https://dist.apache.org/repos/dist/dev/incubator/metron, We will refer to >> this as the dev repo. It will hold the release candidate artifacts >> A SVN clone of the repo at >> https://dist.apache.org/repos/dist/release/incubator/metron, We will >> refer to this as the release repo. It will hold the release artifacts. >> Step 4 - Create the Release Candidate >> >> Now, for each release candidate, we will tag from that branch. Assuming >> that this is RC1: >> git checkout Metron_0.[FR++].0 && git pull >> git tag apache-metron-0.[FR++].0-rc1-incubating >> git push origin —tags >> Now we must create the release candidate tarball. From the apache repo, >> you should run: >> >> git archive --prefix=apache-metron-0.[FR++].0-rc1-incubating/ >> apache-metron-0.[FR++].0-rc1-incubating | gzip > >> apache-metron-0.[FR++].0-rc-incubating.tar.gz >> >> We will refer to this as the release candidate tarball. *Note: Per Apache >> policy, the hardware used to create the candidate tarball must be owned by >> the release manager. >> The artifacts for a release (or a release candidate, for that matter) are >> as follows: >> Release (candidate) Tarball >> MD5 hash of the release tarball. We will refer to this as the release >> candidate tarball.-rc1-incubating.tar.gz > >> apache-metron-0.[FR++].0-rc1-incubating.tar.gz.md5) >> SHA1 hash of the release tarball (gpg --print-md SHA1 >> apache-metron-0.[FR++].0-rc1-incubating.tar.gz > >> apache-metron-0.[FR++].0-rc1-incubating.tar.gz.sha) >> GPG signature of release tarball by the release manager >> Assuming your public code signing key is 0xDEADBEEF, so signing for me >> would be: gpg -u 0xDEADBEEF --armor --output >> apache-metron-0.[FR++].0-rc1-incubating.tar.gz.asc --detach-sig >> apache-metron-0.[FR++].0-rc1-incubating.tar.gz >> If you do not know your code signing key as release manager, you must >> follow the instructions at >> https://www.apache.org/dev/release-signing.html#generate >> Note: You only need the -u arg if you have more than one public/private >> key pair generated. If you have forgotten it, you can find it from the >> output of gpg —fingerprint. It’s the last 4 bytes from the key fingerprint. >> The LICENSE file from the release tarball >> The KEYS file from the release tarball >> The DISCLAIMER file from the release tarball >> A CHANGES file denoting the changes >> We usually construct this by taking the output of git log | grep METRON | >> sed 's/\[//g' | sed 's/\]//g' | grep -v “http” and removing the JIRAs from >> the previous releases (it’s in time sorted order so this is easy). >> >> Create a directory named ${VERSION}-RC${RC_NUM}-incubating (in our case, >> it’s 0.[FR++].0-RC1-incubating) in the dev repo. Place the artifacts from >> above into this directory, add the directory and commit via the subversion >> client: >> svn add 0.[FR++].0-RC1-incubating >> svn commit -m "Adding artifacts for Metron 0.[FR++].0-RC1 (incubating)” >> Step 5 - Verify the build >> Go through the build verification checklist to verify that everything >> works. These instructions can be found here: Verifying Builds >> Step 6 - Verify licensing >> Make sure the release complies with the following Apache licensing >> guidelines: http://www.apache.org/foundation/license-faq.html >> Step 7 - Call for a community release vote >> Next initiate a [VOTE] thread on the dev list to announce the build vote. >> The vote email template can be found here: Build Vote Template. Allow at >> least 72 hours for the community to vote on the release. When you get >> enough votes close the vote by replying [RESULT][VOTE] to the email thread >> with the tally of all the votes >> Step 8 - Call for a incubator release vote >> Once the community has successfully voted on a release, we must escalate >> the vote to the incubator general. The same VOTE thread original email is >> sent to gene...@incubator.apache.org >> >> If issues are found with the release and the vote fails, then the vote >> thread is closed with a synopsis of the voting results and a new RC is >> worked on in the community >> If issues are found with the release and the vote succeeds, then we >> proceed to cut the release, but should notify the community of the issues >> via an email on the dev list with the accompanying JIRA(s) required to >> correct the issue(s). >> >> If no issues are found, then we can cut a release >> Again, wait for at least 72 hours and then close the vote. >> Step 9 - Stage the finished release >> A directory with the name of the version (i.e. 0.3.0) should be made in >> the release svn repository >> >> Collateral from the release candidate in the dev repo should be moved to >> the above directory and renamed to remove the rc (e.g. mv >> apache-metron-0.3.0-rc1-incubating.tar.gz.sha >> apache-metron-0.3.0-incubating.tar.gz.sha) >> >> Add the directory and commit via the subversion client: >> >> svn add 0.3.0-RC1-incubating >> svn commit -m "Adding artifacts for Metron 0.3.0 (incubating)” >> >> Remove the old releases from the release repo (only the current version >> and the KEYS file should exist there). >> Step 14 - Announce build >> Send an email out to user@ and dev@ to announce the release along with >> the changelog and a word of thanks/praise. >> Creating a Maintenance Release >> Creation of the Maintenance Release should follow exactly the same set of >> steps as creating the Feature Release as outlined above, but with two >> exception. First, the version incremented on the maintenance release >> should be the MR++ so that the release is named 0.[FR].[MR++]. Second, if >> a critical JIRA comes in that requires an immediate patch, the votes with >> three binding +1's are still required, but Step 1 (discussion) and Step 2 >> (Jira collecting and tracking), and the 72 hour waiting periods in Steps 7 >> and 8 can be waived. A critical JIRA is something that is either a >> security vulnerability or a functional show stopper. >> Now, we must grab the release candidate binary from >> Ensuring Consistency between Feature and Maintenance releases >> Being able to maintain the previous release train, with only critical or >> important bug fixes and security fixes (generally not new features) for >> users who are averse to frequent large changes is very important for >> production use. They get stability, while the feature code proceeds as >> fast as the community wishes. It is important to assure that all commits >> to the maintenance release also get made in the feature branch (if >> relevant), to avoid the appearance of regressions in the maintenance >> branch. The formal process for assuring this is as follows: >> Every maintenance release JIRA should have a corresponding feature JIRA to >> make sure that the patch is applied consistently to both branches. The >> maintenance JIRA should be cloned and appropriate fix version for the >> feature release should be applied. If the fix is not relevant to the >> feature or maintenance branch then the submitter must explicitly state >> this. In general reviewers should refuse a patch PR unless both feature >> and maintenance JIRAs have been created. >> The release manager has a responsibility to review all commits to the >> maintenance line since last release, and make sure they were duplicated to >> the feature branch (unless not relevant, which must also be determined). >> >> ------------------- >> Thank you, >> >> James Sirota >> PPMC- Apache Metron (Incubating) >> jsirota AT apache DOT org > -- > > Jon > > Sent from my mobile device
------------------- Thank you, James Sirota PPMC- Apache Metron (Incubating) jsirota AT apache DOT org