Kevin,

Your best bet would be to submit a bug and then post the patch, or
code.  It will probably not go in to the 2.0 baseline, but will
certainly be considered for the 3.0 baseline.



On Wed, Jun 17, 2009 at 12:56 PM, Dauch, Kevin - AES<kevin.da...@itt.com> wrote:
> I'm setting up a connection using an ephemeral port to from X to Y, but 
> before the connection is attempted I need to know the port that has been 
> assigned after the bind operation, but before the connection is attempted.  I 
> created an interface PostBindInitializer that is called after the bind but 
> before connection is attempted in AbstractPollingIoConnector.connect0().  
> I've coded it and can submit the added code + changes for the community to 
> review.
>
> Kevin Dauch
> Software Engineer
> kevin.da...@itt.com<mailto:kevin.da...@itt.com> | dir + 315.838.7164
> ITT AES | 474 Phoenix Drive | Rome, NY 13441
>
>
> ________________________________
> This e-mail and any files transmitted with it may be proprietary and are 
> intended solely for the use of the individual or entity to whom they are 
> addressed. If you have received this e-mail in error please notify the sender.
> Please note that any views or opinions presented in this e-mail are solely 
> those of the author and do not necessarily represent those of ITT 
> Corporation. The recipient should check this e-mail and any attachments for 
> the presence of viruses. ITT accepts no liability for any damage caused by 
> any virus transmitted by this e-mail.
>

Reply via email to