On 09/02/2009 08:51 PM, Arjan van de Ven wrote:
the odd part is that my eee 901 works well with wifi.
a couple things, the xandros that ships on this unit works fine, i
tested it and still have it(booting moblin from usb drive).
also my EeePC is 1000. and just to be sure, i reverified BIOS is enabled.
are you VERY sure the wifi is not just off in the bios ?
can you send the output of lspci and maybe dmesg ?
you bet. after a review of below, any suggestion? thx, ...
lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory
Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME
Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME,
943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA
IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller
(rev 02)
01:00.0 Network controller: RaLink RT2860
04:00.0 Ethernet controller: Attansic Technology Corp. Atheros
AR8121/AR8113/AR8114 PCI-E Ethernet Controller (rev b0)
dmesg
[ 0.000000] Linux version 2.6.30.3-4.1.moblin2-netbook
([email protected]) (gcc version 4.3.2 [gcc-4_3-branch
revision 141291] (Moblin Linux) ) #1 SMP PREEMPT Mon Jul 27 12:26:15 UTC
2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7a0000 (usable)
[ 0.000000] BIOS-e820: 000000003f7a0000 - 000000003f7ae000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f7ae000 - 000000003f7f0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f7f0000 - 000000003f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working
around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] last_pfn = 0x3f7a0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-E3FFF write-protect
[ 0.000000] E4000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 1016MB, range: 8MB, type UC
[ 0.000000] total RAM coverred: 1016M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 2
lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 1016MB, range: 8MB, type UC
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 10000-16000
[ 0.000000] RAMDISK: 3f569000 - 3f77eca9
[ 0.000000] Allocated new RAMDISK: 00100000 - 00315ca9
[ 0.000000] Move RAMDISK from 000000003f569000 - 000000003f77eca8 to
00100000 - 00315ca8
[ 0.000000] ACPI: RSDP 000fbcd0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 3f7a0000 0003C (v01 A_M_I_ OEMRSDT 07000814
MSFT 00000097)
[ 0.000000] ACPI: FACP 3f7a0200 00084 (v02 A_M_I_ OEMFACP 07000814
MSFT 00000097)
[ 0.000000] ACPI: DSDT 3f7a05b0 05386 (v01 P0018 P0018000 00000000
INTL 20051117)
[ 0.000000] ACPI: FACS 3f7ae000 00040
[ 0.000000] ACPI: APIC 3f7a0390 0005C (v01 A_M_I_ OEMAPIC 07000814
MSFT 00000097)
[ 0.000000] ACPI: MCFG 3f7a03f0 0003C (v01 A_M_I_ OEMMCFG 07000814
MSFT 00000097)
[ 0.000000] ACPI: OEMB 3f7ae040 00061 (v01 A_M_I_ AMI_OEM 07000814
MSFT 00000097)
[ 0.000000] ACPI: HPET 3f7a5940 00038 (v01 A_M_I_ OEMHPET 07000814
MSFT 00000097)
[ 0.000000] ACPI: SSDT 3f7aeb80 004F0 (v01 PmRef CpuPm 00003000
INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 125MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] node 0 low ram: 00000000 - 379fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f40
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00379fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==>
[0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==>
[0000006000 - 0000007000]
[ 0.000000] #3 [0000400000 - 0000b3b7ec] TEXT DATA BSS ==>
[0000400000 - 0000b3b7ec]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==>
[000009fc00 - 0000100000]
[ 0.000000] #5 [0000b3c000 - 0000b441fc] BRK ==>
[0000b3c000 - 0000b441fc]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==>
[0000010000 - 0000011000]
[ 0.000000] #7 [0000100000 - 0000315ca9] NEW RAMDISK ==>
[0000100000 - 0000315ca9]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==>
[0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x0003f7a0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f7a0
[ 0.000000] On node 0 totalpages: 259887
[ 0.000000] free_area_init_node: node 0, pgdat c09ded80, node_mem_map
c1000280
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3943 pages, LIFO batch:0
[ 0.000000] Normal zone: 2185 pages used for memmap
[ 0.000000] Normal zone: 221557 pages, LIFO batch:31
[ 0.000000] HighMem zone: 315 pages used for memmap
[ 0.000000] HighMem zone: 31847 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap:
3f800000:bf600000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 11 pages at c19f4000, static data 22044
bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 257347
[ 0.000000] Kernel command line: initrd=initrd0.img
root=CDLABEL=netbook-2.0--x86_64-200908181848 rootfstype=iso9660 ro
liveimg quiet BOOT_IMAGE=vmlinuz0
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] NR_IRQS:512
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1599.767 MHz processor.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000999] Initializing HighMem for node 0 (000379fe:0003f7a0)
[ 0.000999] Memory: 1018404k/1040000k available (3863k kernel code,
20744k reserved, 2264k data, 316k init, 128648k highmem)
[ 0.000999] virtual kernel memory layout:
[ 0.000999] fixmap : 0xffedf000 - 0xfffff000 (1152 kB)
[ 0.000999] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000999] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000999] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000999] .init : 0xc0a05000 - 0xc0a54000 ( 316 kB)
[ 0.000999] .data : 0xc07c5d3f - 0xc09fc0fc (2264 kB)
[ 0.000999] .text : 0xc0400000 - 0xc07c5d3f (3863 kB)
[ 0.000999] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000999] hpet clockevent registered
[ 0.000999] HPET: 3 timers in total, 0 timers will be used for
per-cpu timer
[ 0.000999] Calibrating delay loop (skipped), value calculated using
timer frequency.. 3199.53 BogoMIPS (lpj=1599767)
[ 0.000999] Mount-cache hash table entries: 512
[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.000999] CPU: L2 cache: 512K
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 0
[ 0.000999] Intel machine check architecture supported.
[ 0.000999] Intel machine check reporting enabled on CPU#0.
[ 0.000999] using mwait in idle threads.
[ 0.000999] Checking 'hlt' instruction... OK.
[ 0.004495] ACPI: Core revision 20090320
[ 0.020209] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.030217] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.030995] APIC calibration not consistent with PM-Timer: 159ms
instead of 100ms
[ 0.030995] APIC delta adjusted to PM-Timer: 833329 (1333315)
[ 0.030995] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.000999] Initializing CPU#1
[ 0.000999] Calibrating delay using timer specific routine.. 3199.89
BogoMIPS (lpj=1599949)
[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.000999] CPU: L2 cache: 512K
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 0
[ 0.000999] Intel machine check architecture supported.
[ 0.000999] Intel machine check reporting enabled on CPU#1.
[ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new
0x7010600070106
[ 0.102020] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.102048] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.103044] Brought up 2 CPUs
[ 0.103052] Total of 2 processors activated (6399.43 BogoMIPS).
[ 0.103124] CPU0 attaching sched-domain:
[ 0.103131] domain 0: span 0-1 level SIBLING
[ 0.103137] groups: 0 1
[ 0.103148] CPU1 attaching sched-domain:
[ 0.103154] domain 0: span 0-1 level SIBLING
[ 0.103159] groups: 1 0
[ 0.103282] net_namespace: 1088 bytes
[ 0.104075] Time: 4:15:56 Date: 09/03/09
[ 0.104194] NET: Registered protocol family 16
[ 0.104443] ACPI: bus type pci registered
[ 0.104563] PCI: MCFG configuration 0: base e0000000 segment 0 buses
0 - 63
[ 0.104570] PCI: Not using MMCONFIG.
[ 0.104896] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
[ 0.104989] PCI: Using configuration type 1 for base access
[ 0.108434] bio: create slab <bio-0> at 0
[ 0.110523] ACPI: EC: Look up EC in DSDT
[ 0.121842] ACPI: Interpreter enabled
[ 0.121856] ACPI: (supports S0 S3 S4 S5)
[ 0.121900] ACPI: Using IOAPIC for interrupt routing
[ 0.122022] PCI: MCFG configuration 0: base e0000000 segment 0 buses
0 - 63
[ 0.126169] PCI: MCFG area at e0000000 reserved in ACPI motherboard
resources
[ 0.126175] PCI: Using MMCONFIG for extended config space
[ 0.137604] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.137611] ACPI: EC: driver started in poll mode
[ 0.138078] ACPI: No dock devices found.
[ 0.138229] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.138386] pci 0000:00:02.0: reg 10 32bit mmio: [0xf7f00000-0xf7f7ffff]
[ 0.138397] pci 0000:00:02.0: reg 14 io port: [0xdc80-0xdc87]
[ 0.138407] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
[ 0.138417] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf7ec0000-0xf7efffff]
[ 0.138477] pci 0000:00:02.1: reg 10 32bit mmio: [0xf7f80000-0xf7ffffff]
[ 0.138626] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7eb8000-0xf7ebbfff]
[ 0.138706] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.138715] pci 0000:00:1b.0: PME# disabled
[ 0.138824] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.138834] pci 0000:00:1c.0: PME# disabled
[ 0.138948] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.138957] pci 0000:00:1c.1: PME# disabled
[ 0.139075] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.139085] pci 0000:00:1c.2: PME# disabled
[ 0.139200] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.139209] pci 0000:00:1c.3: PME# disabled
[ 0.139294] pci 0000:00:1d.0: reg 20 io port: [0xd480-0xd49f]
[ 0.139383] pci 0000:00:1d.1: reg 20 io port: [0xd800-0xd81f]
[ 0.139470] pci 0000:00:1d.2: reg 20 io port: [0xd880-0xd89f]
[ 0.139557] pci 0000:00:1d.3: reg 20 io port: [0xdc00-0xdc1f]
[ 0.139647] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7eb7c00-0xf7eb7fff]
[ 0.139729] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.139738] pci 0000:00:1d.7: PME# disabled
[ 0.139937] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6
ACPI/GPIO/TCO
[ 0.139946] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6
GPIO
[ 0.139955] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at
0380 (mask 0003)
[ 0.139964] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at
0290 (mask 0007)
[ 0.139972] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at
0068 (mask 0003)
[ 0.140061] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.140074] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.140087] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.140102] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.140115] pci 0000:00:1f.2: reg 20 io port: [0xffa0-0xffaf]
[ 0.140162] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.140171] pci 0000:00:1f.2: PME# disabled
[ 0.140245] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.140454] pci 0000:04:00.0: reg 10 64bit mmio: [0xfbfc0000-0xfbffffff]
[ 0.140470] pci 0000:04:00.0: reg 18 io port: [0xec80-0xecff]
[ 0.140567] pci 0000:04:00.0: PME# supported from D3hot D3cold
[ 0.140577] pci 0000:04:00.0: PME# disabled
[ 0.140668] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
[ 0.140677] pci 0000:00:1c.1: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
[ 0.140843] pci 0000:01:00.0: reg 10 32bit mmio: [0xfbef0000-0xfbefffff]
[ 0.140951] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 0.140961] pci 0000:01:00.0: PME# disabled
[ 0.141056] pci 0000:00:1c.3: bridge 32bit mmio: [0xf8000000-0xfbefffff]
[ 0.141070] pci 0000:00:1c.3: bridge 64bit mmio pref:
[0xf0000000-0xf6ffffff]
[ 0.141152] pci 0000:00:1e.0: transparent bridge
[ 0.141209] pci_bus 0000:00: on NUMA node 0
[ 0.141223] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.141519] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.141654] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.141787] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.141956] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.169547] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 12
14 15)
[ 0.169842] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12
14 15)
[ 0.170145] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12
14 15)
[ 0.170437] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[ 0.170730] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 0.171034] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 0.171335] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 0.171629] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12
14 15)
[ 0.172084] SCSI subsystem initialized
[ 0.172147] libata version 3.00 loaded.
[ 0.172147] usbcore: registered new interface driver usbfs
[ 0.172147] usbcore: registered new interface driver hub
[ 0.173007] usbcore: registered new device driver usb
[ 0.173100] ACPI: WMI: Mapper loaded
[ 0.173131] PCI: Using ACPI for IRQ routing
[ 0.175992] Bluetooth: Core ver 2.15
[ 0.176030] NET: Registered protocol family 31
[ 0.176030] Bluetooth: HCI device and connection manager initialized
[ 0.176030] Bluetooth: HCI socket layer initialized
[ 0.188032] cfg80211: Using static regulatory domain info
[ 0.188038] cfg80211: Regulatory domain: US
[ 0.188042] (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 0.188050] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi,
2700 mBm)
[ 0.188056] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi,
2300 mBm)
[ 0.188063] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi,
2300 mBm)
[ 0.188070] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi,
2300 mBm)
[ 0.188077] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi,
2300 mBm)
[ 0.188083] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi,
3000 mBm)
[ 0.188102] cfg80211: Calling CRDA for country: US
[ 0.188156] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.188169] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.193987] pnp: PnP ACPI init
[ 0.194012] ACPI: bus type pnp registered
[ 0.198334] pnp: PnP ACPI: found 13 devices
[ 0.198341] ACPI: ACPI bus type pnp unregistered
[ 0.198366] system 00:01: iomem range 0xfed13000-0xfed19fff has been
reserved
[ 0.198387] system 00:08: ioport range 0x25c-0x25f has been reserved
[ 0.198395] system 00:08: ioport range 0x380-0x383 has been reserved
[ 0.198404] system 00:08: ioport range 0x400-0x41f has been reserved
[ 0.198411] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.198420] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.198428] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.198437] system 00:08: iomem range 0x8c000000-0x8c01ffff has been
reserved
[ 0.198445] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been
reserved
[ 0.198454] system 00:08: iomem range 0xfed20000-0xfed3ffff has been
reserved
[ 0.198462] system 00:08: iomem range 0xfed50000-0xfed8ffff has been
reserved
[ 0.198471] system 00:08: iomem range 0xffb00000-0xffbfffff has been
reserved
[ 0.198479] system 00:08: iomem range 0xfff00000-0xffffffff could not
be reserved
[ 0.198495] system 00:0a: iomem range 0xfec00000-0xfec00fff has been
reserved
[ 0.198503] system 00:0a: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 0.198517] system 00:0b: iomem range 0xe0000000-0xe3ffffff has been
reserved
[ 0.198533] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.198541] system 00:0c: iomem range 0xc0000-0xcffff could not be
reserved
[ 0.198549] system 00:0c: iomem range 0xe0000-0xfffff could not be
reserved
[ 0.198557] system 00:0c: iomem range 0x100000-0x3f7fffff could not
be reserved
[ 0.233578] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
[ 0.233584] pci 0000:00:1c.0: IO window: disabled
[ 0.233595] pci 0000:00:1c.0: MEM window: disabled
[ 0.233603] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.233617] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[ 0.233625] pci 0000:00:1c.1: IO window: 0xe000-0xefff
[ 0.233636] pci 0000:00:1c.1: MEM window: 0xfbf00000-0xfbffffff
[ 0.233645] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.233658] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
[ 0.233663] pci 0000:00:1c.2: IO window: disabled
[ 0.233673] pci 0000:00:1c.2: MEM window: disabled
[ 0.233681] pci 0000:00:1c.2: PREFETCH window: disabled
[ 0.233694] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:01
[ 0.233699] pci 0000:00:1c.3: IO window: disabled
[ 0.233710] pci 0000:00:1c.3: MEM window: 0xf8000000-0xfbefffff
[ 0.233720] pci 0000:00:1c.3: PREFETCH window:
0x000000f0000000-0x000000f6ffffff
[ 0.233734] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[ 0.233739] pci 0000:00:1e.0: IO window: disabled
[ 0.233749] pci 0000:00:1e.0: MEM window: disabled
[ 0.233757] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.233790] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.233801] pci 0000:00:1c.0: setting latency timer to 64
[ 0.233820] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.233829] pci 0000:00:1c.1: setting latency timer to 64
[ 0.233847] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.233856] pci 0000:00:1c.2: setting latency timer to 64
[ 0.233874] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.233884] pci 0000:00:1c.3: setting latency timer to 64
[ 0.233899] pci 0000:00:1e.0: setting latency timer to 64
[ 0.233909] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.233916] pci_bus 0000:00: resource 1 mem:
[0x000000-0xffffffffffffffff]
[ 0.233923] pci_bus 0000:04: resource 0 io: [0xe000-0xefff]
[ 0.233930] pci_bus 0000:04: resource 1 mem: [0xfbf00000-0xfbffffff]
[ 0.233938] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbefffff]
[ 0.233945] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf6ffffff]
[ 0.233952] pci_bus 0000:06: resource 3 io: [0x00-0xffff]
[ 0.233959] pci_bus 0000:06: resource 4 mem:
[0x000000-0xffffffffffffffff]
[ 0.234102] NET: Registered protocol family 2
[ 0.243158] IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
[ 0.243933] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.245039] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
[ 0.246319] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.246326] TCP reno registered
[ 0.249252] NET: Registered protocol family 1
[ 0.249383] Unpacking initramfs...
[ 0.385606] Freeing initrd memory: 2135k freed
[ 0.388616] Microcode Update Driver: v2.00
<[email protected]>, Peter Oruba
[ 0.389218] highmem bounce pool size: 64 pages
[ 0.389620] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.389708] msgmni has been set to 1742
[ 0.391145] alg: No test for stdrng (krng)
[ 0.391253] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.391263] io scheduler noop registered
[ 0.391311] io scheduler cfq registered (default)
[ 0.391335] pci 0000:00:02.0: Boot video device
[ 0.391727] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.391754] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.392053] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.392080] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.392347] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.392373] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 0.392627] pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.392653] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 0.393182] ACPI: AC Adapter [AC0] (off-line)
[ 0.393368] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.393376] ACPI: Power Button [PWRF]
[ 0.393546] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.394839] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[ 0.403339] ACPI: Lid Switch [LID]
[ 0.403491] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.403498] ACPI: Sleep Button [SLPB]
[ 0.403644] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 0.403651] ACPI: Power Button [PWRB]
[ 0.404414] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:17/input/input4
[ 0.404423] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 0.405186] ACPI: SSDT 3f7ae180 0023C (v01 PmRef Cpu0Ist 00003000
INTL 20051117)
[ 0.405939] ACPI: SSDT 3f7ae450 00724 (v01 PmRef Cpu0Cst 00003001
INTL 20051117)
[ 0.406812] Monitor-Mwait will be used to enter C-1 state
[ 0.406880] Monitor-Mwait will be used to enter C-2 state
[ 0.406933] Monitor-Mwait will be used to enter C-3 state
[ 0.406952] Marking TSC unstable due to TSC halts in idle
[ 0.407000] Switched to high resolution mode on CPU 0
[ 0.407044] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.407111] processor ACPI_CPU:00: registered as cooling_device0
[ 0.407125] ACPI: Processor [P001] (supports<7>Switched to high
resolution mode on CPU 1
[ 0.407134] 8 throttling states)
[ 0.407834] ACPI: SSDT 3f7ae0b0 000CC (v01 PmRef Cpu1Ist 00003000
INTL 20051117)
[ 0.408547] ACPI: SSDT 3f7ae3c0 00085 (v01 PmRef Cpu1Cst 00003000
INTL 20051117)
[ 0.409722] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.409780] processor ACPI_CPU:01: registered as cooling_device1
[ 0.409791] ACPI: Processor [P002] (supports 8 throttling states)
[ 0.433526] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.433546] ACPI: Thermal Zone [TZ00] (45 C)
[ 0.436577] Linux agpgart interface v0.103
[ 0.436611] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 0.436844] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 0.439544] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.440506] loop: module loaded
[ 0.440564] Driver 'sd' needs updating - please use bus_type methods
[ 0.440588] Driver 'sr' needs updating - please use bus_type methods
[ 0.440729] ata_piix 0000:00:1f.2: version 2.13
[ 0.440758] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 0.440769] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 0.440840] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.441036] scsi0 : ata_piix
[ 0.441255] scsi1 : ata_piix
[ 0.444550] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0
irq 14
[ 0.444558] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8
irq 15
[ 0.444730] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
[ 0.444736] Copyright (c) 1999-2006 Intel Corporation.
[ 0.444784] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
[ 0.444789] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 0.444840] Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2
[ 0.444846] Copyright (c) 2007-2009 Intel Corporation.
[ 0.444920] ATL1E 0000:04:00.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[ 0.444939] ATL1E 0000:04:00.0: setting latency timer to 64
[ 0.467595] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 0.467601] e100: Copyright(c) 1999-2006 Intel Corporation
[ 0.467665] tun: Universal TUN/TAP device driver, 1.6
[ 0.467670] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 0.467851] [drm] Initialized drm 1.1.0 20060810
[ 0.467903] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.467912] i915 0000:00:02.0: setting latency timer to 64
[ 0.494513] i2c-adapter i2c-1: unable to read EDID block.
[ 0.723123] integrated sync not supported
[ 0.723205] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[ 0.723274] Fusion MPT base driver 3.04.07
[ 0.723279] Copyright (c) 1999-2008 LSI Corporation
[ 0.723298] Fusion MPT SPI Host driver 3.04.07
[ 0.723563] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.723614] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 0.723646] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.723654] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.723794] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 1
[ 0.727730] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.727742] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.727780] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7eb7c00
[ 0.737036] Skipping EDID probe due to cached edid
[ 0.737045] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.737121] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.737131] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.737140] usb usb1: Product: EHCI Host Controller
[ 0.737148] usb usb1: Manufacturer: Linux
2.6.30.3-4.1.moblin2-netbook ehci_hcd
[ 0.737157] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.737339] usb usb1: configuration #1 chosen from 1 choice
[ 0.737446] hub 1-0:1.0: USB hub found
[ 0.737473] hub 1-0:1.0: 8 ports detected
[ 0.737914] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.737992] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.738161] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 0.738191] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.738203] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.738458] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 0.738535] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d480
[ 0.738677] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.738689] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.738698] usb usb2: Product: UHCI Host Controller
[ 0.738707] usb usb2: Manufacturer: Linux
2.6.30.3-4.1.moblin2-netbook uhci_hcd
[ 0.738716] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.738963] usb usb2: configuration #1 chosen from 1 choice
[ 0.739151] hub 2-0:1.0: USB hub found
[ 0.739190] hub 2-0:1.0: 2 ports detected
[ 0.739624] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 0.739654] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.739668] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.739943] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 3
[ 0.740088] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
[ 0.740232] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.740244] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.740255] usb usb3: Product: UHCI Host Controller
[ 0.740262] usb usb3: Manufacturer: Linux
2.6.30.3-4.1.moblin2-netbook uhci_hcd
[ 0.740269] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.740541] usb usb3: configuration #1 chosen from 1 choice
[ 0.740676] hub 3-0:1.0: USB hub found
[ 0.740733] hub 3-0:1.0: 2 ports detected
[ 0.741242] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 0.741274] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.741284] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.741548] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 4
[ 0.741643] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d880
[ 0.741804] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.741814] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.741823] usb usb4: Product: UHCI Host Controller
[ 0.741831] usb usb4: Manufacturer: Linux
2.6.30.3-4.1.moblin2-netbook uhci_hcd
[ 0.741839] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.742096] usb usb4: configuration #1 chosen from 1 choice
[ 0.742195] hub 4-0:1.0: USB hub found
[ 0.742225] hub 4-0:1.0: 2 ports detected
[ 0.742536] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low)
-> IRQ 16
[ 0.742563] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.742573] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.742753] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 5
[ 0.742810] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000dc00
[ 0.742931] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.742942] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.742950] usb usb5: Product: UHCI Host Controller
[ 0.742958] usb usb5: Manufacturer: Linux
2.6.30.3-4.1.moblin2-netbook uhci_hcd
[ 0.742967] usb usb5: SerialNumber: 0000:00:1d.3
[ 0.743155] usb usb5: configuration #1 chosen from 1 choice
[ 0.743254] hub 5-0:1.0: USB hub found
[ 0.743276] hub 5-0:1.0: 2 ports detected
[ 0.743563] Initializing USB Mass Storage driver...
[ 0.743675] usbcore: registered new interface driver usb-storage
[ 0.743684] allocated 1024x600 fb: 0x007df000, bo f758a5c0
[ 0.743693] USB Mass Storage support registered.
[ 0.743804] fbcon: inteldrmfb (fb0) is primary device
[ 0.743810] usbcore: registered new interface driver libusual
[ 0.743858] usbcore: registered new interface driver ums-alauda
[ 0.743902] usbcore: registered new interface driver ums-datafab
[ 0.743940] usbcore: registered new interface driver ums-freecom
[ 0.743978] usbcore: registered new interface driver ums-isd200
[ 0.744033] usbcore: registered new interface driver ums-jumpshot
[ 0.744071] usbcore: registered new interface driver ums-karma
[ 0.744110] usbcore: registered new interface driver ums-sddr09
[ 0.744153] usbcore: registered new interface driver ums-sddr55
[ 0.744197] usbcore: registered new interface driver ums-usbat
[ 0.744314] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 0.769695] ata2.00: CFA: ASUS-PHISON SSD, TST2.04U, max UDMA/66
[ 0.769703] ata2.00: 15761088 sectors, multi 0: LBA
[ 0.769786] ata2.01: CFA: ASUS-PHISON SSD, TST2.04P, max UDMA/66
[ 0.769794] ata2.01: 63045360 sectors, multi 0: LBA
[ 0.772587] ata2.00: configured for UDMA/66
[ 0.775584] ata2.01: configured for UDMA/66
[ 0.775643] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.775660] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.775765] mice: PS/2 mouse device common for all mice
[ 0.775848] scsi 1:0:0:0: Direct-Access ATA ASUS-PHISON SSD
TST2 PQ: 0 ANSI: 5
[ 0.776158] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 0.776445] scsi 1:0:1:0: Direct-Access ATA ASUS-PHISON SSD
TST2 PQ: 0 ANSI: 5
[ 0.776697] sd 1:0:1:0: Attached scsi generic sg1 type 0
[ 0.776900] sd 1:0:0:0: [sda] 15761088 512-byte hardware sectors:
(8.06 GB/7.51 GiB)
[ 0.776945] sd 1:0:0:0: [sda] Write Protect is off
[ 0.776953] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.777026] sd 1:0:0:0: [sda] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[ 0.777340] sda:<6>rtc_cmos 00:03: RTC can wake from S4
[ 0.777670] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.777726] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.777761] Linux video capture interface: v2.00
[ 0.777792] Bluetooth: Generic Bluetooth USB driver ver 0.5
[ 0.777850] usbcore: registered new interface driver btusb
[ 0.778099] cpuidle: using governor ladder
[ 0.778454] cpuidle: using governor menu
[ 0.778482] sdhci: Secure Digital Host Controller Interface driver
[ 0.778487] sdhci: Copyright(c) Pierre Ossman
[ 0.779324] sda1<5>sd 1:0:1:0: [sdb] 63045360 512-byte hardware
sectors: (32.2 GB/30.0 GiB)
[ 0.779336] sda2 sda3 sda4
[ 0.779401] sd 1:0:1:0: [sdb] Write Protect is off
[ 0.779410] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.779494] sd 1:0:1:0: [sdb] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[ 0.779904] sdb:<5>sd 1:0:0:0: [sda] Attached SCSI disk
[ 0.780180] usbcore: registered new interface driver hiddev
[ 0.780230] usbcore: registered new interface driver usbhid
[ 0.780237] usbhid: v2.6:USB HID core driver
[ 0.780384] logger: created 64K log 'log_main'
[ 0.780439] logger: created 256K log 'log_events'
[ 0.780489] logger: created 64K log 'log_radio'
[ 0.780521] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 0.780550] acer-wmi: No or unsupported WMI interface, unable to load
[ 0.780602] Advanced Linux Sound Architecture Driver Version 1.0.20.
[ 0.780900] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 0.780956] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 0.781197] sdb1
[ 0.781471] sd 1:0:1:0: [sdb] Attached SCSI disk
[ 0.802183] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input5
[ 0.808987] [drm] LVDS-8: set mode 1024x600 c
[ 0.819264] ALSA device list:
[ 0.819270] #0: HDA Intel at 0xf7eb8000 irq 16
[ 0.819321] nf_conntrack version 0.5.0 (16250 buckets, 65000 max)
[ 0.819561] CONFIG_NF_CT_ACCT is deprecated and will be removed soon.
Please use
[ 0.819567] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack
module option or
[ 0.819573] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 0.821284] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.821306] TCP cubic registered
[ 0.821310] Initializing XFRM netlink socket
[ 0.821453] NET: Registered protocol family 10
[ 0.823066] lo: Disabled Privacy Extensions
[ 0.825261] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 0.825429] NET: Registered protocol family 17
[ 0.825449] Bluetooth: L2CAP ver 2.13
[ 0.825453] Bluetooth: L2CAP socket layer initialized
[ 0.825461] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.825465] Bluetooth: SCO socket layer initialized
[ 0.826514] Bluetooth: RFCOMM socket layer initialized
[ 0.826527] Bluetooth: RFCOMM TTY layer initialized
[ 0.826532] Bluetooth: RFCOMM ver 1.11
[ 0.826538] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 0.826543] Bluetooth: BNEP filters: protocol multicast
[ 0.826549] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 0.827756] Using IPI No-Shortcut mode
[ 0.827971] PM: Resume from disk failed.
[ 0.828277] Magic number: 9:383:261
[ 0.828506] Freeing unused kernel memory: 316k freed
[ 0.828938] Write protecting the kernel text: 3864k
[ 0.829128] Write protecting the kernel read-only data: 1752k
[ 0.837240] Console: switching to colour frame buffer device 128x37
[ 0.845654] fb0: inteldrmfb frame buffer device
[ 0.845660] registered panic notifier
[ 0.972062] udev: starting version 145
[ 1.143318] usb 1-3: new high speed USB device using ehci_hcd and
address 3
[ 1.270002] usb 1-3: New USB device found, idVendor=13fe, idProduct=1f00
[ 1.270039] usb 1-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1.270050] usb 1-3: Product: DataTraveler 2.0
[ 1.270059] usb 1-3: Manufacturer: Kingston
[ 1.270068] usb 1-3: SerialNumber: 5B820E0007D9
[ 1.270400] usb 1-3: configuration #1 chosen from 1 choice
[ 1.271767] scsi2 : SCSI emulation for USB Mass Storage devices
[ 1.275291] usb-storage: device found at 3
[ 1.275301] usb-storage: waiting for device to settle before scanning
[ 1.375219] usb 1-5: new high speed USB device using ehci_hcd and
address 4
[ 1.491156] usb 1-5: New USB device found, idVendor=058f, idProduct=6335
[ 1.491173] usb 1-5: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1.491187] usb 1-5: Product: Mass Storage Device
[ 1.491198] usb 1-5: Manufacturer: Generic
[ 1.491208] usb 1-5: SerialNumber: 058F63356336
[ 1.491528] usb 1-5: configuration #1 chosen from 1 choice
[ 1.493613] scsi3 : SCSI emulation for USB Mass Storage devices
[ 1.497380] usb-storage: device found at 4
[ 1.497394] usb-storage: waiting for device to settle before scanning
[ 1.500044] Clocksource tsc unstable (delta = -76547822 ns)
[ 1.702451] usb 1-8: new high speed USB device using ehci_hcd and
address 6
[ 1.864426] usb 1-8: New USB device found, idVendor=04f2, idProduct=b071
[ 1.864444] usb 1-8: New USB device strings: Mfr=2, Product=1,
SerialNumber=3
[ 1.864457] usb 1-8: Product: CNF7129
[ 1.864468] usb 1-8: Manufacturer: Chicony Electronics Co., Ltd.
[ 1.864479] usb 1-8: SerialNumber: SN0001
[ 1.864816] usb 1-8: configuration #1 chosen from 1 choice
[ 2.074200] usb 2-2: new full speed USB device using uhci_hcd and
address 2
[ 2.232723] usb 2-2: New USB device found, idVendor=046d, idProduct=c526
[ 2.232740] usb 2-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.232754] usb 2-2: Product: USB Receiver
[ 2.232764] usb 2-2: Manufacturer: Logitech
[ 2.233154] usb 2-2: configuration #1 chosen from 1 choice
[ 2.240805] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6
[ 2.241211] generic-usb 0003:046D:C526.0001: input,hidraw0: USB HID
v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0
[ 2.250233] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input7
[ 2.250871] generic-usb 0003:046D:C526.0002: input,hiddev96,hidraw1:
USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1
[ 2.457182] usb 5-1: new full speed USB device using uhci_hcd and
address 2
[ 2.612997] usb 5-1: New USB device found, idVendor=0b05, idProduct=b700
[ 2.613046] usb 5-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.613064] usb 5-1: Product: BT-253
[ 2.613078] usb 5-1: Manufacturer: Broadcom Corp
[ 2.613092] usb 5-1: SerialNumber: 0015AFFF8448
[ 2.613487] usb 5-1: configuration #1 chosen from 1 choice
[ 3.113312] input: ImPS/2 Logitech Wheel Mouse as
/devices/platform/i8042/serio1/input/input8
[ 6.275586] usb-storage: device scan complete
[ 6.276909] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0
PMAP PQ: 0 ANSI: 0 CCS
[ 6.281789] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 6.284473] sd 2:0:0:0: [sdc] 7823360 512-byte hardware sectors:
(4.00 GB/3.73 GiB)
[ 6.285207] sd 2:0:0:0: [sdc] Write Protect is off
[ 6.285232] sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 6.285247] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 6.288568] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 6.288882] sdc: sdc1
[ 6.290179] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 6.497457] usb-storage: device scan complete
[ 6.498436] scsi 3:0:0:0: Direct-Access Single Flash Reader
1.00 PQ: 0 ANSI: 0
[ 6.502651] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 6.511727] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 6.525723] ISO 9660 Extensions: RRIP_1991A
[ 6.613129] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23)
initialised: [email protected]
[ 6.974117] sd 3:0:0:0: [sdd] 246016 512-byte hardware sectors: (125
MB/120 MiB)
[ 6.974937] sd 3:0:0:0: [sdd] Write Protect is off
[ 6.974955] sd 3:0:0:0: [sdd] Mode Sense: 03 00 00 00
[ 6.974967] sd 3:0:0:0: [sdd] Assuming drive cache: write through
[ 6.978416] sd 3:0:0:0: [sdd] Assuming drive cache: write through
[ 6.978690] sdd: sdd1
[ 6.983813] sd 3:0:0:0: [sdd] Attached SCSI removable disk
[ 12.138606] kjournald starting. Commit interval 15 seconds
[ 12.139020] EXT3 FS on dm-0, internal journal
[ 12.139047] EXT3-fs: mounted filesystem with writeback data mode.
[ 14.209309] udev: starting version 145
[ 14.676409] EXT3 FS on dm-0, internal journal
[ 14.949862] eeepc: Eee PC Hotkey Driver
[ 14.972317] rt2860sta: module is from the staging directory, the
quality is unknown, you have been warned.
[ 14.983104] rt2860 0000:01:00.0: PCI INT A -> GSI 19 (level, low) ->
IRQ 19
[ 14.983587]
[ 14.983591]
[ 14.983593] === pAd = f8bce000, size = 587240 ===
[ 14.983597]
[ 14.983605] <-- RTMPAllocAdapterBlock, Status=0
[ 14.983676] rt2860 0000:01:00.0: setting latency timer to 64
[ 15.000893] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
[ 15.017805] input: CNF7129 as
/devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input9
[ 15.018139] usbcore: registered new interface driver uvcvideo
[ 15.018151] USB Video Class driver (v0.1.0)
[ 15.289379] ACPI: Battery Slot [BAT0] (battery present)
[ 16.004548] eeepc: Hotkey init flags 0x41
[ 16.011560] eeepc: Get control methods supported: 0x101713
[ 16.019292] input: Asus EeePC extra buttons as
/devices/virtual/input/input10
[ 19.355379] Skipping EDID probe due to cached edid
[ 19.388996] Skipping EDID probe due to cached edid
[ 19.465013] warning: `avahi-daemon' uses deprecated v2 capabilities
in a way that may be insecure.
[ 19.573158] ATL1E 0000:04:00.0: irq 28 for MSI/MSI-X
[ 19.573769] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.583692] RX DESC f4409000 size = 2048
[ 19.584434] <-- RTMPAllocTxRxRingMemory, Status=0
[ 19.588068] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[ 19.588079] 1. Phy Mode = 0
[ 19.588085] 2. Phy Mode = 0
[ 19.608756] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 19.615113] 3. Phy Mode = 0
[ 19.619696] MCS Set = 00 00 00 00 00
[ 19.621278] <==== RTMPInitialize, Status=0
[ 19.621354] 0x1300 = 00073200
[ 24.618351] Skipping EDID probe due to cached edid
[ 24.699093] Skipping EDID probe due to cached edid
[ 24.730654] Skipping EDID probe due to cached edid
[ 25.680091] ===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 172
[ 28.697277] ERROR!!! RTMPCancelTimer failed, Timer hasn't been
initialize!
[ 30.000269] ra0: no IPv6 routers present
[ 86.632224] EXT2-fs warning: maximal mount count reached, running
e2fsck is recommended
--
jack craig
[email protected]
831-684-1375 (Office)
831-596-6924 (cell)
IM: jackcraigaptos (AIM)
_________________________________
This email has been ClamScanned !
www.LinuxLightHouse.com
_______________________________________________
Moblin dev Mailing List
[email protected]
To manage or unsubscribe from this mailing list visit:
http://lists.moblin.org/listinfo/dev or your user account on http://moblin.org
once logged in.
For more information on the Moblin Developer Mailing lists visit:
http://moblin.org/community/mailing-lists
