Hi,
I am now able to boot the image created using the latest
release(2.1-PR-Final-ivi-noiegd-20100208.ks) of the .ks file.
For the previous release(2.1-preview-ivi-noiegd.ks) I did try the X
-configure and paced the generated xorg.conf file in /etc/X11 and tried
startx but it still dint boot up.
Also the previous release's .ks file already had the
"xorg-x11-server-Xorg-setuid" package so I dint add it to the .ks file.
And the latest release is taking the kernel 2.6.31.6-44.1 pkg from the
repo so I am getting a bootable image :)
I am yet to install it , in case i come across any problem will get
back.
Thanks for all the support provided.
Vandana
To: "Zheng, Yanshuang" <[email protected]>, Vandana
Sasidharan <[email protected]>, "[email protected]"
<[email protected]>
From: "Selbak, Rolla N" <[email protected]>
Date: 02/22/2010 11:53PM
Subject: Re: [Moblin Dev] Unable to boot the USB image created using
MIC2
Hi Vandana,
I just noticed you're using an older 2.1 preview release. Please
use the
Final 2.1 IVI release:
[1]http://moblin.org/projects/2.1-ivi-project-releases
The .ks file and images should work with no workarounds needed. If
you do
have problems, post them here again.
Thanks,
rs
On 2/22/10 5:50 AM, "Zheng, Yanshuang" <[email protected]>
wrote:
> Try one of these workarounds:
>
> 1) Enter single mode of the installed OS, yum update kernel-ivi to
> 2.6.31.6-44.1(repo has been updated) and install pkg
> xorg-x11-server-Xorg-setuid. Reboot should make X boot.
> 2) Enter single mode of the installed OS, yum update kernel-ivi to
> 2.6.31.6-44.1 and chmod +s /usr/bin/Xorg. Reboot should make X
boot.
> 3) modify the .ks file by adding "xorg-x11-server-Xorg-setuid" in
Package
> section, and then re-create the image using MIC2(repo has been
updated with
> new kernel 2.6.31.6-44.1). This should result in workable non-iegd
image, both
> live boot and real boot after installation.
>
>
> Thanks,
> Yanshuang
>
>> -----Original Message-----
>> From: [email protected] [[2]mailto:[email protected]]
On Behalf Of
>> Vandana Sasidharan
>> Sent: 2010年2月22日 20:44
>> To: Selbak, Rolla N; [email protected]
>> Subject: Re: [Moblin Dev] Unable to boot the USB image created
using MIC2
>>
>> Im able to go to the single user mode using the 'tab'. Will do
as
>> selbak suggested with respect to the xorg.conf file and update.
>> Thanks
>> Vandana
>>
>> To: Vandana Sasidharan <[email protected]>,
>> "[email protected]" <[email protected]>
>> From: "Selbak, Rolla N" <[email protected]>
>> Date: 02/22/2010 12:58PM
>> Subject: Re: [Moblin Dev] Unable to boot the USB image
created using
>> MIC2
>> You can go into Single user mode without installing by doing:
>> When you boot up the livecd, once you see the boot menu,
press
>> 'tab'...
>> It will allow you to add the word 'single' to the booting
>> command-line (or any other run-level you like)...
>> That will put you single-user mode...
>> Also, I am taking look at the kernel again and making sure
the IEGD
>> code is out of there...seems like there is a bug where if the
IEGD
>> patch is applied, but the config is disabled, it won't allow
Vesa to
>> run correctly...
>> rs
>> On 2/21/10 9:00 PM, "Vandana Sasidharan"
>> <[email protected]> wrote:
>> Hi,
>> The problem is since Im not able to install it Im not able to
go to
>> the single user mode.
>> Is this problem due to the way Im burning it on to the USB
stick or
>> could something be wrong with the way the image was created?
>> Vandana
>> To: "Selbak, Rolla N" <[email protected]>, Vandana
Sasidharan
>> <[email protected]>, "[email protected]"
<[email protected]>
>> From: "Selbak, Rolla N" <[email protected]>
>> Date: 02/19/2010 11:04PM
>> Subject: Re: [Moblin Dev] Unable to boot the USB image
created using
>> MIC2
>> Also, if that doesn't work, boot in single-user...boot up to
the
>> kernel...then run 'X-configure' to automatically create an
>> xorg.conf...then use that xorg.conf to try and 'startx'...
>> I suspect the issue might be that...but I can't be sure until
we at
>> least assert that you can boot up to the kernel...
>> rs
>> On 2/19/10 9:21 AM, "Selbak, Rolla N"
<[email protected]>
>> wrote:
>> Ok try this....
>> Boot from single-user mode...see if the kernel comes
up...then
>> 'startx'...
>> To boot to single-user, when the install menu comes up, press
>> 'escape', then add the word 'Single' in the boot options...
>> rs
>> On 2/19/10 3:19 AM, "Vandana Sasidharan"
>> <[email protected]> wrote:
>> Hi,
>> I initially used the command
>> "sudo dd
>> if=moblin-2.1-2.1-preview-ivi-noiegd-201002182031.usbimg
of=/dev/sdb
>> "
>> to burn the image to the USB stick.
>> After Selbak's suggestion I also tried the
>> "moblin-image-writer -c
>> moblin-2.1-2.1-preview-ivi-noiegd-201002182031.usbimg "
>> but both give me only the blinking cursor on the black
screenwhen I
>> try to boot from the USB stick.
>> I tried to install the image from the USB stick to a hard
disk it
>> gives me the error:
>> "Waiting for system to settle before starting
>> installation...
>> 19:09:54 Fatal Error: X startup failed
>> /usr/sbin/liveinst: line 90: kill: ' ' : not
a pid
>> or valid job spec
>> INIT: no more processes left in this
runlevel"
>> I haven't tried the LiveCD yet.
>> The command I used to create the image in the first place is
>> "sudo moblin-image-creator --verbose --debug
>> --config=2.1-preview-ivi-noiegd.ks --format=liveusb
--cache=mycache"
>> Any help????
>> Thanks
>> Vandana
>> =====-----=====-----=====
>> Notice: The information contained in this e-mail
>> message and/or attachments to it may contain
>> confidential or privileged information. If you are
>> not the intended recipient, any dissemination, use,
>> review, distribution, printing or copying of the
>> information contained in this e-mail message
>> and/or attachments to it are strictly prohibited. If
>> you have received this communication in error,
>> please notify us by reply e-mail or telephone and
>> immediately and permanently delete the message
>> and any attachments. Thank you
>> _______________________________________________
>> Moblin dev Mailing List
>> [email protected]
>> To manage or unsubscribe from this mailing list visit:
>> [1][3]http://lists.moblin.org/listinfo/dev or your user
account on
>> [2][4]http://moblin.org once logged in.
>> For more information on the Moblin Developer Mailing lists
visit:
>> [3][5]http://moblin.org/community/mailing-lists
>> =====-----=====-----=====
>> Notice: The information contained in this e-mail
>> message and/or attachments to it may contain
>> confidential or privileged information. If you are
>> not the intended recipient, any dissemination, use,
>> review, distribution, printing or copying of the
>> information contained in this e-mail message
>> and/or attachments to it are strictly prohibited. If
>> you have received this communication in error,
>> please notify us by reply e-mail or telephone and
>> immediately and permanently delete the message
>> and any attachments. Thank you
>>
>> =====-----=====-----=====
>> Notice: The information contained in this e-mail
>> message and/or attachments to it may contain
>> confidential or privileged information. If you are
>> not the intended recipient, any dissemination, use,
>> review, distribution, printing or copying of the
>> information contained in this e-mail message
>> and/or attachments to it are strictly prohibited. If
>> you have received this communication in error,
>> please notify us by reply e-mail or telephone and
>> immediately and permanently delete the message
>> and any attachments. Thank you
>>
>> References
>>
>> 1. [6]http://lists.moblin.org/listinfo/dev
>> 2. [7]http://moblin.org/
>> 3. [8]http://moblin.org/community/mailing-lists
>> _______________________________________________
>> Moblin dev Mailing List
>> [email protected]
>>
>> To manage or unsubscribe from this mailing list visit:
>> [9]http://lists.moblin.org/listinfo/dev or your user account on
>> [10]http://moblin.org once
>> logged in.
>>
>> For more information on the Moblin Developer Mailing lists visit:
>> [11]http://moblin.org/community/mailing-lists
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
References
1. http://moblin.org/projects/2.1-ivi-project-releases
2. mailto:[email protected]
3. http://lists.moblin.org/listinfo/dev
4. http://moblin.org/
5. http://moblin.org/community/mailing-lists
6. http://lists.moblin.org/listinfo/dev
7. http://moblin.org/
8. http://moblin.org/community/mailing-lists
9. http://lists.moblin.org/listinfo/dev
10. http://moblin.org/
11. http://moblin.org/community/mailing-lists
_______________________________________________
Moblin dev Mailing List
[email protected]
To manage or unsubscribe from this mailing list visit:
http://lists.moblin.org/listinfo/dev or your user account on http://moblin.org
once logged in.
For more information on the Moblin Developer Mailing lists visit:
http://moblin.org/community/mailing-lists
