Hi Then, I have found that I need to run newtmgr as root when using ble (e.g., sudo newtmgr ...)
Chris On Thu, Mar 16, 2017 at 05:22:01PM +0800, then yon wrote: > Dear Support, > > Anyone have answer on this? > > Some updates on the newtmgr setting: > > Connection profiles: BT01: type=ble, connstring='nimble-bleprph' > > Whenever i sent newtmgr command i get the following: > > 2017/03/16 17:11:35 dev: hci0 up 2017/03/16 17:11:35 dev: hci1 up Error: > no supported devices available > > I'm using V2TEC Bluetooth dongle (Bus 001 Device 016: ID 0a12:0001 > Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)) > > Thank you. > > Regards, > > Then Yoong Ze > > > On 10/3/2017 6:59 PM, then yon wrote: > > Dear Support, > > > > After the being success to do image upgrade with slinky app, now i > > moving forward to image upgrade through ble with bleprph example. > > > > With the target.yml as below: > > ### Target: targets/split_slinky > > target.app: "@apache-mynewt-core/apps/splitty" > > target.bsp: "@apache-mynewt-core/hw/bsp/nrf52dk" > > target.build_profile: "optimized" > > target.loader: "@apache-mynewt-core/apps/bleprph" > > target.syscfg: "BLE_LL_CFG_FEAT_LE_ENCRYPTION=0:BLE_SM_LEGACY=0" > > > > The problem is i do not get any newtmgr response in serial with this > > example; and i can't detect any BT packet from bleprph example. > > > > if i changed the target.yml as below; i can detect bleprph advertising > > packet: > > ### Target: targets/split_slinky > > target.bsp: "@apache-mynewt-core/hw/bsp/nrf52dk" > > target.build_profile: "optimized" > > target.app: "@apache-mynewt-core/apps/bleprph" > > target.syscfg: "BLE_LL_CFG_FEAT_LE_ENCRYPTION=0:BLE_SM_LEGACY=0" > > > > > > The command i used to detect ble advertising packet is "sudo hcitool > > lescan --duplicates &" > > > > > > Thank you. > > > > Regards, > > > > Then Yoong Ze > > >
