Hey, SAMA5D2 guys,
I have been looking at the ATSAMA5D27-WLSOM1 Evaluation Kit. I am
impressed. It is based on the SAMAD27C and the ATWIL3000 wireless
module. I am tempted to buy one.
The ATWIL3000 has an SDIO interface to the Wifi (like the Broadcom
chips) and UART interface to the Bluetooth. It runs $150 USD at
Mouser. An open Microchip driver is for the ATWIL3000 is available in
github. Anyone interesting in a fun Wifi project?
Greg
Refs:
https://www.microchip.com/DevelopmentTools/ProductDetails/PartNO/DM320117
https://www.microchip.com/wwwproducts/en/ATWILC3000
https://www.mouser.com/development-tools-center/embedded-processor-development-kits/development-boards-kits-arm/microchip-atsama5d27wlsom1-eval-kit/n-cxd2tZ34u2t9
On 6/11/2020 2:33 PM, Adam Feuer wrote:
Takeyoshi,
Hey, in case you are interested, I got the SDMMC driver port working for
reading data today. It's quite a mess, and on a private branch. I will try
to get it working for writing, clean it up, and push it to this branch in a
few days.
Thanks so much for your help!!
cheers
adam
On Mon, May 4, 2020 at 3:29 PM Adam Feuer <a...@starcat.io> wrote:
Takeyoshi,
Hi, I've been working on the SDMMC driver off and on. I still haven't got
it working, but I am making some progress. Here's a log of register reads
and writes captured from U-Boot on the SAMA5D27:
index usecs op (bytes) register value value
binary register long description
0 0 read (4): [0x0040: HTCAPBLT0] 0x27ec0c8c 0010 0111
1110 1100 0000 1100 1000 1100 Host Controller Capabilities 0 Register
1 4983 read (2): [0x00fe:HOST_VERSION] 0x00001502 0000 0000
0000 0000 0001 0101 0000 0010 Host Controller Version Register
2 10101 read (4): [0x0044: HTCAPBLT1] 0x00200f77 0000 0000
0010 0000 0000 1111 0111 0111 Host Controller Capabilities 1 Register
3 15225 write (1): [0x002f: SRR]w 0x00000001 0000 0000
0000 0000 0000 0000 0000 0001 Software Reset Register
4 20428 write (1): [0x0029: PCR]w 0x0000000f 0000 0000
0000 0000 0000 0000 0000 1111 Power Control Register
5 25629 write (4): [0x0034: IRQSTATEN]w 0x027f003b 0000 0010
0111 1111 0000 0000 0011 1011 Interrupt Status Enable Register
6 30833 write (4): [0x0038: IRQSIGEN]w 0x00000000 0000 0000
0000 0000 0000 0000 0000 0000 Interrupt Signal Enable Register
7 44875 read (4): [0x0040: HTCAPBLT0] 0x27e80c8c 0010 0111
1110 1000 0000 1100 1000 1100 Host Controller Capabilities 0 Register
8 49848 read (2): [0x00fe:HOST_VERSION] 0x00001502 0000 0000
0000 0000 0001 0101 0000 0010 Host Controller Version Register
9 54966 read (4): [0x0044: HTCAPBLT1] 0x00200070 0000 0000
0010 0000 0000 0000 0111 0000 Host Controller Capabilities 1 Register
10 60088 write (1): [0x002f: SRR]w 0x00000001 0000 0000
0000 0000 0000 0000 0000 0001 Software Reset Register
11 66296 write (1): [0x0029: PCR]w 0x0000000f 0000 0000
0000 0000 0000 0000 0000 1111 Power Control Register
12 71353 write (4): [0x0034: IRQSTATEN]w 0x027f003b 0000 0010
0111 1111 0000 0000 0011 1011 Interrupt Status Enable Register
13 76557 write (4): [0x0038: IRQSIGEN]w 0x00000000 0000 0000
0000 0000 0000 0000 0000 0000 Interrupt Signal Enable Register
14 88990 read (4): [0x0024: PRSSTAT] 0x01ff0000 0000 0001
1111 1111 0000 0000 0000 0000 Present State Register
15 94080 write (2): [0x002c: SYSCTL]w 0x00000000 0000 0000
0000 0000 0000 0000 0000 0000 System Control Register, or Clock Control
Register/Timout Control Register
16 99285 read (1): [0x0028: PROCTL] 0x00000000 0000 0000
0000 0000 0000 0000 0000 0000 Protocol Control Register
17 106408 read (4): [0x0024: PRSSTAT] 0x01ff0000 0000 0001
1111 1111 0000 0000 0000 0000 Present State Register
18 111377 write (2): [0x002c: SYSCTL]w 0x00000000 0000 0000
0000 0000 0000 0000 0000 0000 System Control Register, or Clock Control
Register/Timout Control Register
19 116582 read (1): [0x0028: PROCTL] 0x00000000 0000 0000
0000 0000 0000 0000 0000 0000 Protocol Control Register
20 121704 read (4): [0x0024: PRSSTAT] 0x01ff0000 0000 0001
1111 1111 0000 0000 0000 0000 Present State Register
21 126818 write (2): [0x002c: SYSCTL]w 0x00000000 0000 0000
0000 0000 0000 0000 0000 0000 System Control Register, or Clock Control
Register/Timout Control Register
22 132150 write (2): [0x002c: SYSCTL]w 0x000057a1 0000 0000
0000 0000 0101 0111 1010 0001 System Control Register, or Clock Control
Register/Timout Control Register
23 138235 write (2): [0x002c: SYSCTL]w 0x000057a7 0000 0000
0000 0000 0101 0111 1010 0111 System Control Register, or Clock Control
Register/Timout Control Register
24 143292 read (1): [0x0028: PROCTL] 0x00000000 0000 0000
0000 0000 0000 0000 0000 0000 Protocol Control Register
25 148410 write (1): [0x0028: PROCTL]w 0x00000000 0000 0000
0000 0000 0000 0000 0000 0000 Protocol Control Register
26 154620 read (4): [0x0024: PRSSTAT] 0x01ff0000 0000 0001
1111 1111 0000 0000 0000 0000 Present State Register
27 159583 write (4): [0x0030: IRQSTAT]w 0xffffffff 1111 1111
1111 1111 1111 1111 1111 1111 Interrupt Status Register
28 164789 write (4): [0x0008: CMDARG]w 0x00000000 0000 0000
0000 0000 0000 0000 0000 0000 Command Argument Register
29 169993 write (2): [0x000e: CR]w 0x00000000 0000 0000
0000 0000 0000 0000 0000 0000 Command Register
30 175199 read (4): [0x0030: IRQSTAT] 0x00000000 0000 0000
0000 0000 0000 0000 0000 0000 Interrupt Status Register
31 180322 read (4): [0x0010: CMDRSP0] 0x00000000 0000 0000
0000 0000 0000 0000 0000 0000 Command Response 0
I have a MMC sniffer and logic analyzer hooked up and can see traffic on
the SD Card bus under U-Boot. Under NuttX, nothing. I am going to try to
capture a register log like this one under NuttX, and compare; and maybe
try to replay the U-Boot sequence under NuttX to see if I can get signals
on the SDMMC bus. If you have more ideas, I would love to hear them.
cheers
adam
On Mon, Apr 13, 2020 at 5:38 PM Adam Feuer <a...@starcat.io> wrote:
Takeyoshi,
I finally got the new sama5 sam_sdmmc.c driver to compile. I haven't
tested it yet, so I don't know if it actually works... I pushed the code to
the branch, I am attaching the config I used.
-adam
On Thu, Apr 2, 2020 at 3:23 PM Adam Feuer <a...@starcat.io> wrote:
Takeyoshi,
No worries– I had to work on other things too.
-adam
On Thu, Apr 2, 2020 at 3:22 PM Takeyoshi Kikuchi <
kiku...@centurysys.co.jp> wrote:
Adam,
Sorry, I am currently busy working and have no progress.
I want to check tomorrow.
Takeyoshi Kikuchi
On 2020/04/02 9:48, Adam Feuer wrote:
Takeyoshi,
I did some work on the SDMCC driver today, it compiles now and I
pushed the
code to the branch. I will try it and let you know how it goes. I am
still
not sure everything is right, for instance why do I have to specify
SDMMC0_SIZE? The sama5d2x_memorymap.c file seems to need it. But it
should
not be operating in memory-mapped mode, so I'm confused.
Here are the config settings I used:
#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the
installed
.config file.
# You can then do "make savedefconfig" to generate a new defconfig
file
that includes your
# modifications.
#
# CONFIG_AUDIO_FORMAT_MP3 is not set
# CONFIG_DISABLE_OS_API is not set
# CONFIG_NSH_ARGCAT is not set
# CONFIG_NSH_CMDOPT_HEXDUMP is not set
# CONFIG_NSH_CMDPARMS is not set
# CONFIG_SAMA5_UART0 is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="sama5d2-xult"
CONFIG_ARCH_BOARD_SAMA5D2_XULT=y
CONFIG_ARCH_BUTTONS=y
CONFIG_ARCH_CHIP="sama5"
CONFIG_ARCH_CHIP_ATSAMA5D27=y
CONFIG_ARCH_CHIP_SAMA5=y
CONFIG_ARCH_CHIP_SAMA5D2=y
CONFIG_ARCH_INTERRUPTSTACK=2048
CONFIG_ARCH_IRQBUTTONS=y
CONFIG_ARCH_LOWVECTORS=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_AUDIO=y
CONFIG_AUDIO_NUM_BUFFERS=8
CONFIG_BOARD_LOOPSPERMSEC=65775
CONFIG_BOOT_RUNFROMSDRAM=y
CONFIG_BUILTIN=y
CONFIG_DEBUG_FEATURES=y
CONFIG_DEBUG_FULLOPT=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_DEV_LOOP=y
CONFIG_DEV_ZERO=y
CONFIG_EXAMPLES_HELLO=y
CONFIG_EXAMPLES_PARTITION=y
CONFIG_EXAMPLES_TCPBLASTER=y
CONFIG_EXAMPLES_TCPECHO=y
CONFIG_EXAMPLES_WGET=y
CONFIG_EXAMPLES_WGET_URL="http://10.0.0.1/"
CONFIG_FAT_LCNAMES=y
CONFIG_FAT_LFN=y
CONFIG_FS_FAT=y
CONFIG_FS_PROCFS=y
CONFIG_FS_PROCFS_EXCLUDE_VERSION=y
CONFIG_FS_ROMFS=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_HIDKBD_POLLUSEC=80000
CONFIG_I2S=y
CONFIG_INTELHEX_BINARY=y
CONFIG_IOB_NBUFFERS=72
CONFIG_IOB_THROTTLE=16
CONFIG_MAX_TASKS=16
CONFIG_MAX_WDOGPARMS=2
CONFIG_NETINIT_NETLOCAL=y
CONFIG_NETINIT_NOMAC=y
CONFIG_NETUTILS_NETLIB_GENERICURLPARSER=y
CONFIG_NETUTILS_TELNETC=y
CONFIG_NETUTILS_WEBCLIENT=y
CONFIG_NET_ARP_IPIN=y
CONFIG_NET_ARP_SEND=y
CONFIG_NET_BROADCAST=y
CONFIG_NET_CDCECM=y
CONFIG_NET_ETH_PKTSIZE=1514
CONFIG_NET_ICMP=y
CONFIG_NET_ICMP_SOCKET=y
CONFIG_NET_ROUTE=y
CONFIG_NET_STATISTICS=y
CONFIG_NET_TCP=y
CONFIG_NET_TCPBACKLOG=y
CONFIG_NET_TCP_NOTIFIER=y
CONFIG_NET_TCP_WRITE_BUFFERS=y
CONFIG_NET_UDP=y
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NSH_ARCHINIT=y
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_PROMPT_STRING="nsh> "
CONFIG_NSH_QUOTE=y
CONFIG_NSH_READLINE=y
CONFIG_NSH_ROMFSETC=y
CONFIG_NXPLAYER_DEFAULT_MEDIADIR="/mnt/sdcard"
CONFIG_NXPLAYER_INCLUDE_SYSTEM_RESET=y
CONFIG_NXPLAYER_RECURSIVE_MEDIA_SEARCH=y
CONFIG_PREALLOC_MQ_MSGS=4
CONFIG_PREALLOC_TIMERS=4
CONFIG_PREALLOC_WDOGS=16
CONFIG_RAMLOG=y
CONFIG_RAMLOG_BUFSIZE=16384
CONFIG_RAMLOG_SYSLOG=y
CONFIG_RAM_SIZE=268435456
CONFIG_RAM_START=0x20000000
CONFIG_RAM_VSTART=0x20000000
CONFIG_RAW_BINARY=y
CONFIG_READLINE_CMD_HISTORY=y
CONFIG_READLINE_CMD_HISTORY_LEN=100
CONFIG_READLINE_CMD_HISTORY_LINELEN=120
CONFIG_READLINE_TABCOMPLETION=y
CONFIG_RR_INTERVAL=200
CONFIG_SAMA5D2XULT_528MHZ=y
CONFIG_SAMA5D2XULT_USBHOST_STACKSIZE=2048
CONFIG_SAMA5_BOOT_SDRAM=y
CONFIG_SAMA5_DDRCS_HEAP_END=0x2fa00000
CONFIG_SAMA5_DDRCS_RESERVE=y
CONFIG_SAMA5_EHCI=y
CONFIG_SAMA5_HSMC=y
CONFIG_SAMA5_OHCI=y
CONFIG_SAMA5_PIOA_IRQ=y
CONFIG_SAMA5_PIOB_IRQ=y
CONFIG_SAMA5_PIOC_IRQ=y
CONFIG_SAMA5_PIO_IRQ=y
CONFIG_SAMA5_RTC=y
CONFIG_SAMA5_SDMMC0=y
CONFIG_SAMA5_TRNG=y
CONFIG_SAMA5_UART1=y
CONFIG_SAMA5_UDPHS=y
CONFIG_SAMA5_UHPHS=y
CONFIG_SCHED_HPWORKPRIORITY=192
CONFIG_SCHED_LPNTHREADS=2
CONFIG_SCHED_LPWORK=y
CONFIG_SCHED_WAITPID=y
CONFIG_SDCLONE_DISABLE=y
CONFIG_SERIAL_TERMIOS=y
CONFIG_SIG_DEFAULT=y
CONFIG_SIG_EVTHREAD=y
CONFIG_START_DAY=31
CONFIG_START_MONTH=7
CONFIG_START_YEAR=2014
CONFIG_SYMTAB_ORDEREDBYNAME=y
CONFIG_SYSLOG_TIMESTAMP=y
CONFIG_SYSTEM_NSH=y
CONFIG_SYSTEM_NSH_CXXINITIALIZE=y
CONFIG_SYSTEM_NXPLAYER=y
CONFIG_SYSTEM_PING=y
CONFIG_SYSTEM_VI=y
CONFIG_TTY_SIGINT=y
CONFIG_TTY_SIGSTP=y
CONFIG_UART1_SERIAL_CONSOLE=y
CONFIG_USBDEV=y
CONFIG_USBDEV_DMA=y
CONFIG_USBDEV_DUALSPEED=y
CONFIG_USBDEV_TRACE=y
CONFIG_USBDEV_TRACE_NRECORDS=512
CONFIG_USBHOST_HIDKBD=y
CONFIG_USBHOST_MSC=y
CONFIG_USER_ENTRYPOINT="nsh_main"
CONFIG_WDOG_INTRESERVE=2
-adam
--
---------------------------------
Takeyoshi Kikuchi
kiku...@centurysys.co.jp
--
Adam Feuer <a...@starcat.io>
--
Adam Feuer <a...@starcat.io>
--
Adam Feuer <a...@starcat.io>