Ok! Do report your issues, we're trying to improve the on boarding experience.
Best, Matias On Fri, Sep 18, 2020, at 19:15, Flavio Castro Alves Filho wrote: > Hello Matias, > > Em sex., 18 de set. de 2020 às 16:26, Matias N. <mat...@imap.cc> escreveu: > > > > Hi Flavio, > > please have a look at our new documentation, which you may find helpful: > > > > https://nuttx.apache.org/docs/latest/ > > > > I did ... that's how I found most of the problems to have this initial > version running. > > > Most boards have a "nsh" documentation which should be a good start (this > > is also explained in the documentation). > > > > ok. I will check this out. > > > I don't know the particular status of this board, but usually STM32 boards > > are > > well supported. > > > > Probably there is something with this board. > > > Best, > > Matias > > > > Thank you for your response. > > Best regards, > > Flavio > > > On Fri, Sep 18, 2020, at 16:16, Flavio Castro Alves Filho wrote: > > > Hello, > > > > > > I am studying NuttX for a new project. I am using Nucleo-F429ZI as > > > reference, which is quite a complete board and has a large memory for > > > testing. > > > > > > I followed some instructions from the internet (mostly from NuttX > > > website) and I could compile and run a binary on the board. Including > > > executing a Hello Application located at the menuconfig. > > > > > > My question is if there is an initial configuration file (defconfig) > > > for this board that initializes the base features of the board. > > > Something similar to an initial configuration on the STM32CubeIDE new > > > project, where all the base peripherals (leds, buttons, ethernet, usb, > > > serial, ...) are previously initialized. > > > > > > In my first test here, serial was not enabled, compilation failed and > > > ls command in Nuttshell didn't work (only the call for the > > > application). > > > > > > Best regards, > > > > > > Flavio > > > > > > -- > > > Flavio de Castro Alves Filho > > > > > > flavio.al...@gmail.com > > > Twitter: http://twitter.com/#!/fraviofii > > > LinkedIn profile: www.linkedin.com/in/flaviocastroalves > > > > > > > -- > Flavio de Castro Alves Filho > > flavio.al...@gmail.com > Twitter: http://twitter.com/#!/fraviofii > LinkedIn profile: www.linkedin.com/in/flaviocastroalves >
