Hello Xiang, Thank you for your quick response.
How do I manage the format of a littlefs 'disk' from programming (not nutshell) ? I am looking for something similar to 'mksmatfs' function. Or only the flash_eraseall function is enough? Or should I add the "-o autoformat" option on the last parameter of the mount() function? Best regards, Flavio Em qua., 28 de abr. de 2021 às 09:33, Xiang Xiao <xiaoxiang781...@gmail.com> escreveu: > > LittleFS can talk directly with the standard MTD driver, so you just need: > > 1. Call register_mtddriver in your board file > 2. Run mount from nsh like this: > > mount -t littlefs -o autoformat /dev/mtd /mnt > > > On Wed, Apr 28, 2021 at 8:03 PM Flavio Castro Alves Filho < > flavio.al...@gmail.com> wrote: > > > Hello, > > > > Today my application uses SmartFS associated with MX25L SPI Dataflash. > > > > I intend to replace the SmartFS to LittleFS. > > > > In the filesystem section of menuconfig, I can disable > > CONFIG_FS_SMARTFS and enable CONFIG_FS_SMARTFS. > > > > But when I go to "Device Drivers" --> "Memory Technology Device (MTD) > > Support", there is an option CONFIG_MTD_SMART. > > > > Is there any equivalent configuration for LittleFS? > > > > After enabling the LittleFS, is there anything that must be done at > > the board code to enable it? > > > > Best Regards, > > > > Flavio > > > > > > -- > > Flavio de Castro Alves Filho > > > > flavio.al...@gmail.com > > Twitter: http://twitter.com/#!/fraviofii > > LinkedIn profile: www.linkedin.com/in/flaviocastroalves > > -- Flavio de Castro Alves Filho flavio.al...@gmail.com Twitter: http://twitter.com/#!/fraviofii LinkedIn profile: www.linkedin.com/in/flaviocastroalves
