Actually this was not exact same thing what we need; we need a cheap touch glass or film something like this one https://www.mikroe.com/touch-panel
On 2021/06/26 01:35:42, murat tologlu <mtolo...@hotmail.com> wrote: > Here there is something similar : > https://www.hwhardsoft.de/english/projects/arduitouch-esp/ > > On 2021/06/25 19:47:06, murat tologlu <mtolo...@hotmail.com> wrote: > > Great news! > > > > Which touch glass you placed over the display ? I would like to buy one > > immediately. > > > > Maybe the Nuttx-Fellows may consider to include this opportunity into the > > Nuttx ! > > > > BR, > > Murat > > > > On 2021/06/25 19:39:49, Barbiani <barbi...@gmail.com> wrote: > > > Hi, > > > > > > I have put together a touch screen driver for this board using a separate > > > touch glass placed over the tft display. > > > > > > It is resistive and the connections are described in the source file. > > > > > > https://github.com/lvgl/lv_drivers/blob/master/indev/AD_touch.c > > > > > > > > > On Fri, Jun 25, 2021, 16:17 Gustavo Henrique Nihei <ghni...@gmail.com> > > > wrote: > > > > > > > Hi Murat, > > > > > > > > Just to add to Alan's answer, this is actually the Slideshow mode for > > > > the > > > > LVGL Widgets example. > > > > You may disable it via "CONFIG_EXAMPLES_LVGLDEMO_WIDGETS_SLIDESHOW". > > > > Then the example application will just wait for the user input. > > > > > > > > Best regards, > > > > Gustavo. > > > > > > > > On Fri, Jun 25, 2021 at 4:12 PM Alan Carvalho de Assis > > > > <acas...@gmail.com> > > > > wrote: > > > > > > > > > Hi Murat, > > > > > > > > > > The LVGL moving up and down it not a bug, it is by design. > > > > > > > > > > LVGL guys did it as as way to show all the screen exactly for board > > > > > that doesn't have a touchscreen to interact with it. Otherwise you > > > > > should think it was crashed/freeze, don't you? :-) > > > > > > > > > > Hmm, maybe we can use a BackBerry TouchPad as mouse. > > > > > > > > > > Matias, do you think it is possible? Probably we will need to > > > > > implement a driver to make it behavior like a mouse to be used on > > > > > NuttX. > > > > > > > > > > BR, > > > > > > > > > > Alan > > > > > > > > > > On 6/25/21, murat tologlu <mtolo...@hotmail.com> wrote: > > > > > > Dear Gustavo, > > > > > > > > > > > > Thanks you very much for your interested and for the informations > > > > you've > > > > > > provided. > > > > > > > > > > > > I wasn't aware that the esp-wrover-kit doesn't have any touch > > > > > > keypad, I > > > > > am > > > > > > very much surprised about that. That's why I talked about an > > > > > > improper > > > > > lvgl > > > > > > operation, I was expecting to interact with the display as I do > > > > normally > > > > > > with many other boards :) I think this is a weakness of the > > > > > esp-wrover-kit, > > > > > > do we have to use a separate keypad in case a user entry is > > > > > > required? > > > > > > > > > > > > On the other hand the display is not stable, it moves up and down as > > > > > seen on > > > > > > old-time TVs, it is a synch problem, it can be related to frame > > > > > > rate, I > > > > > will > > > > > > try overclocking the SPI bus as you've suggested. > > > > > > > > > > > > Best regards, > > > > > > Murat > > > > > > > > > > > > On 2021/06/25 12:13:40, Gustavo Henrique Nihei <ghni...@gmail.com> > > > > > wrote: > > > > > >> Hi Murat, > > > > > >> > > > > > >> I've just watched your video after you made it public. > > > > > >> It seems to be working as expected for the "esp32-wrover-kit:lvgl" > > > > > >> configuration. > > > > > >> What exactly do you mean by frequency mismatch? I can see some > > > > > >> stripes > > > > > in > > > > > >> the video, but I believe this is probably due to the video > > > > > >> recording. > > > > > >> If the issue is regarding the framerate, you may tweak the > > > > configuration > > > > > >> in > > > > > >> order to increase it (e.g. overclocking the SPI bus via > > > > > >> CONFIG_ESP32_LCD_OVERCLOCK) > > > > > >> Also, the ESP-WROVER-KIT does not provide a touch sensor. > > > > > >> > > > > > >> Best regards, > > > > > >> Gustavo. > > > > > >> > > > > > >> On Fri, Jun 25, 2021 at 1:05 AM murat tologlu > > > > > >> <mtolo...@hotmail.com> > > > > > >> wrote: > > > > > >> > > > > > >> > Hi, > > > > > >> > > > > > > >> > Brand new ESP-WROVER-KIT V4.1, loaded with latest nuttx and apps, > > > > > >> > without > > > > > >> > any jumper modification > > > > > >> > > > > > > >> > https://youtu.be/17vXIOFpU5c > > > > > >> > > > > > > >> > Seems like a frequency mismatch, touch input doesn't work as > > > > > >> > well.. > > > > > >> > what > > > > > >> > can be the reason? > > > > > >> > > > > > > >> > > > > > >> > > > > > >> -- > > > > > >> Gustavo Henrique Nihei > > > > > >> > > > > > > > > > > > > > > > > > > > > > > > -- > > > > Gustavo Henrique Nihei > > > > > > > > > >
