Hi, please check https://github.com/apache/incubator-nuttx/pull/5401 <https://github.com/apache/incubator-nuttx/pull/5401> with initial support.
Feedback is highly appreciated. /Piet > Am 02.02.2022 um 08:57 schrieb Peter Kalbus <p...@mailbox.org.INVALID>: > > Hi Flavio, > > let me share my latest findings. > > I’m down to setjmp/longjmp, which needs to be adapted to AARCH64. A > preliminary version is available, but not fully working, yet. > > I can share my code, if you want to dig into that, too. > > /Piet > > > >> Am 31.01.2022 um 11:10 schrieb Flavio Castro Alves Filho >> <flavio.al...@gmail.com>: >> >> Hi Peter, >> >> Yes, I intend to use it for simulation only. >> >> It is for a personal project. I already have a Ubuntu based desktop >> machine, which works fine. But for mobility, if I could work on my MAC, it >> would be better. >> >> I will try to figure out what is going on. >> >> Thank you for all your help. >> >> Best regards, >> >> Flavio >> >> >> Em dom., 30 de jan. de 2022 10:28, Kalbus, Peter <p...@mailbox.org.invalid> >> escreveu: >> >>> Hi, >>> >>> are you only interested in the simulation or also have a real target in >>> mind? >>> >>> Maybe you can try to get it working for your real target instead of the >>> simulation. The simulation is definitely not working overall on M1 based >>> host systems yet. >>> >>> I‘m using RP2040 based targets and they are working using my M1 based host >>> system. >>> >>> /Piet >>> >>> >>>> Am 30.01.2022 um 13:22 schrieb Flavio de Castro Alves Filho < >>> flavio.al...@gmail.com>: >>>> >>>> That’s what I did. >>>> >>>> So it is not the problem. >>>> >>>>> On 29 Jan 2022, at 19:43, Peter Kalbus <p...@mailbox.org.INVALID> >>> wrote: >>>>> >>>>> Hi Flavio, >>>>> >>>>> there’s an explanation in NuttX documentation: >>> https://nuttx.apache.org/docs/latest/quickstart/install.html#kconfig-frontend >>> < >>> https://nuttx.apache.org/docs/latest/quickstart/install.html#kconfig-frontend >>>> >>>>> Check for the „MacOS, Ubuntu 18.04 LTS and earlier“ tab. >>>>> >>>>> It’s a couple of months back, as I did this … but I’m quite sure, that >>> I followed that explanation. >>>>> >>>>> /Piet >>>>> >>>>> >>>>>>> Am 29.01.2022 um 23:17 schrieb Flavio de Castro Alves Filho < >>> flavio.al...@gmail.com>: >>>>>> >>>>>> Hi Peter, >>>>>> >>>>>> How did you install kconfig-frontends on your machine? >>>>>> >>>>>> Best regards, >>>>>> >>>>>> Flavio >>>>>> >>>>>>> On 29 Jan 2022, at 18:13, Kalbus, Peter <p...@mailbox.org.INVALID> >>> wrote: >>>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> I know, it‘s not complete. But you should get a different error … I >>> see, ARM based CPU is now detected … next step will take longer. >>>>>>> >>>>>>> /Piet >>>>>>> >>>>>>>> Am 29.01.2022 um 22:03 schrieb Flavio de Castro Alves Filho < >>> flavio.al...@gmail.com>: >>>>>>>> >>>>>>>> Hello Guys. Thank you for your fast response. >>>>>>>> >>>>>>>> @Alan, indeed it is an ARM-based Mac. >>>>>>>> >>>>>>>> @Peter, I added your patch in my NuttX project and ran again the >>> configuration, but without success yet :-( >>>>>>>> >>>>>>>> Here is the output >>>>>>>> >>>>>>>> flavio@Flavios-MacBook-Pro nuttx % tools/configure.sh -m sim:nsh >>>>>>>> Copy files >>>>>>>> Select CONFIG_HOST_MACOS=y >>>>>>>> Select CONFIG_HOST_ARM=y >>>>>>>> Refreshing... >>>>>>>> make[2]: Nothing to be done for `clean_context'. >>>>>>>> CP: arch/dummy/Kconfig to >>> /Users/flavio/mestrado/nuttx/nuttx/arch/dummy/dummy_kconfig >>>>>>>> CP: boards/dummy/Kconfig to >>> /Users/flavio/mestrado/nuttx/nuttx/boards/dummy/dummy_kconfig >>>>>>>> LN: platform/board to >>> /Users/flavio/mestrado/nuttx/apps/platform/dummy >>>>>>>> LN: include/arch to arch/sim/include >>>>>>>> LN: include/arch/board to >>> /Users/flavio/mestrado/nuttx/nuttx/boards/sim/sim/sim/include >>>>>>>> LN: drivers/platform to >>> /Users/flavio/mestrado/nuttx/nuttx/drivers/dummy >>>>>>>> LN: include/arch/chip to >>> /Users/flavio/mestrado/nuttx/nuttx/arch/sim/include/sim >>>>>>>> /Users/flavio/mestrado/nuttx/nuttx/tools/link.sh >>> /Users/flavio/mestrado/nuttx/nuttx/arch/sim/include/sim include/arch/chip >>>>>>>> LN: arch/sim/src/chip to >>> /Users/flavio/mestrado/nuttx/nuttx/arch/sim/src/sim >>>>>>>> LN: arch/sim/src/board to >>> /Users/flavio/mestrado/nuttx/nuttx/boards/sim/sim/sim/src >>>>>>>> touch .dirlinks >>>>>>>> mkkconfig in /Users/flavio/mestrado/nuttx/apps/boot >>>>>>>> mkkconfig in /Users/flavio/mestrado/nuttx/apps/canutils >>>>>>>> mkkconfig in /Users/flavio/mestrado/nuttx/apps/crypto >>>>>>>> mkkconfig in /Users/flavio/mestrado/nuttx/apps/examples >>>>>>>> mkkconfig in /Users/flavio/mestrado/nuttx/apps/fsutils >>>>>>>> mkkconfig in /Users/flavio/mestrado/nuttx/apps/gpsutils >>>>>>>> mkkconfig in /Users/flavio/mestrado/nuttx/apps/graphics >>>>>>>> mkkconfig in /Users/flavio/mestrado/nuttx/apps/industry >>>>>>>> mkkconfig in /Users/flavio/mestrado/nuttx/apps/interpreters >>>>>>>> mkkconfig in /Users/flavio/mestrado/nuttx/apps/math >>>>>>>> mkkconfig in /Users/flavio/mestrado/nuttx/apps/mlearning >>>>>>>> mkkconfig in /Users/flavio/mestrado/nuttx/apps/netutils >>>>>>>> mkkconfig in /Users/flavio/mestrado/nuttx/apps/system/libuv >>>>>>>> mkkconfig in /Users/flavio/mestrado/nuttx/apps/system >>>>>>>> mkkconfig in /Users/flavio/mestrado/nuttx/apps/testing >>>>>>>> mkkconfig in /Users/flavio/mestrado/nuttx/apps/wireless/bluetooth >>>>>>>> mkkconfig in /Users/flavio/mestrado/nuttx/apps/wireless/ieee802154 >>>>>>>> mkkconfig in /Users/flavio/mestrado/nuttx/apps/wireless >>>>>>>> mkkconfig in /Users/flavio/mestrado/nuttx/apps >>>>>>>> arch/arm/src/imxrt/Kconfig:1504: syntax error >>>>>>>> arch/arm/src/imxrt/Kconfig:1503: invalid option >>>>>>>> arch/arm/src/stm32l4/Kconfig:5347: syntax error >>>>>>>> arch/arm/src/stm32l4/Kconfig:5296: missing end statement for this >>> entry >>>>>>>> arch/arm/src/stm32l4/Kconfig:5164: missing end statement for this >>> entry >>>>>>>> arch/arm/src/stm32l4/Kconfig:8: missing end statement for this entry >>>>>>>> arch/arm/Kconfig:1178: missing end statement for this entry >>>>>>>> arch/arm/Kconfig:7: missing end statement for this entry >>>>>>>> Kconfig:1957: missing end statement for this entry >>>>>>>> arch/arm/src/stm32l4/Kconfig:5346: invalid statement >>>>>>>> arch/arm/src/stm32l4/Kconfig:5356: unexpected end statement >>>>>>>> arch/arm/src/stm32l4/Kconfig:5359: syntax error >>>>>>>> arch/arm/src/stm32l4/Kconfig:5358: invalid statement >>>>>>>> arch/arm/src/stm32l4/Kconfig:5368: unexpected end statement >>>>>>>> arch/arm/src/stm32l4/Kconfig:5371: syntax error >>>>>>>> arch/arm/src/stm32l4/Kconfig:5370: invalid statement >>>>>>>> arch/arm/src/stm32l4/Kconfig:5380: unexpected end statement >>>>>>>> arch/arm/src/stm32l4/Kconfig:5382: unexpected end statement >>>>>>>> arch/arm/src/stm32l4/Kconfig:5384: unexpected end statement >>>>>>>> arch/arm/src/stm32l4/Kconfig:6253: unexpected end statement >>>>>>>> arch/arm/Kconfig:1179: unexpected end statement >>>>>>>> arch/arm/Kconfig:1199: unexpected end statement >>>>>>>> Kconfig:1959: unexpected end statement >>>>>>>> boards/sim/sim/sim/Kconfig:58: syntax error >>>>>>>> boards/sim/sim/sim/Kconfig:57: invalid option >>>>>>>> drivers/note/Kconfig:80: syntax error >>>>>>>> drivers/note/Kconfig:79: invalid option >>>>>>>> drivers/sensors/Kconfig:308: syntax error >>>>>>>> drivers/sensors/Kconfig:307: invalid option >>>>>>>> drivers/syslog/Kconfig:317: syntax error >>>>>>>> drivers/syslog/Kconfig:316: invalid option >>>>>>>> make: *** [olddefconfig] Error 1 >>>>>>>> ERROR: failed to refresh >>>>>>>> flavio@Flavios-MacBook-Pro nuttx % >>>>>>>> >>>>>>>> >>>>>>>> Is there any missing requirement from my environment? >>>>>>>> >>>>>>>> How do I implement the manual architecture setup? I’m afraid that it >>> won’t work either … >>>>>>>> >>>>>>>> Best regards, >>>>>>>> >>>>>>>> Flavio >>>>>>>> >>>>>>>> >>>>>>>>> On 29 Jan 2022, at 17:53, Peter Kalbus <p...@mailbox.org.INVALID> >>> wrote: >>>>>>>>> >>>>>>>>> Created PR to detect host CPU type: >>> https://github.com/apache/incubator-nuttx/pull/5374 < >>> https://github.com/apache/incubator-nuttx/pull/5374> < >>> https://github.com/apache/incubator-nuttx/pull/5374 < >>> https://github.com/apache/incubator-nuttx/pull/5374>> >>>>>>>>> >>>>>>>>> /Piet >>>>>>>>> >>>>>>>>> >>>>>>>>>>> Am 29.01.2022 um 19:12 schrieb Peter Kalbus <p...@mailbox.org >>> <mailto:p...@mailbox.org>>: >>>>>>>>>> >>>>>>>>>> Hi again, >>>>>>>>>> >>>>>>>>>> just as an extension. On the same M1, I’ve Ubuntu ARM64 running >>> using Parallels VM. >>>>>>>>>> >>>>>>>>>> Same issue: Host CPU Type detected as „x86_64“ and compilation >>> stops at same file —> see below. >>>>>>>>>> >>>>>>>>>> Issue seems to be not specific to MacOS M1, but rather generic to >>> ARM64 host systems. >>>>>>>>>> >>>>>>>>>> /Piet >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> ————— >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> AR (create): libdrivers.a bchlib_setup.o bchlib_teardown.o >>> bchlib_read.o bchlib_write.o bchlib_cache.o bchlib_sem.o bchdev_register.o >>> bchdev_unregister.o bchdev_driver.o ioe_dummy.o gpio.o gpio_lower_half.o >>> loop.o losetup.o pipe.o fifo.o pipe_common.o serial.o serial_io.o vsyslog.o >>> syslog_stream.o syslog_channel.o syslog_putc.o syslog_write.o >>> syslog_force.o syslog_flush.o syslog_initialize.o syslog_device.o oneshot.o >>> arch_alarm.o hid_parser.o dev_null.o dev_zero.o ramdisk.o mkrd.o >>>>>>>>>> make[1]: Leaving directory >>> '/home/piet/Projects/NuttX/ptka/nuttx/drivers' >>>>>>>>>> IN: drivers/libdrivers.a -> staging/libdrivers.a >>>>>>>>>> make[1]: Entering directory >>> '/home/piet/Projects/NuttX/ptka/nuttx/boards' >>>>>>>>>> CC: boardctl.c >>>>>>>>>> AR (create): libboards.a dummy.o boardctl.o >>>>>>>>>> make[1]: Leaving directory >>> '/home/piet/Projects/NuttX/ptka/nuttx/boards' >>>>>>>>>> IN: boards/libboards.a -> staging/libboards.a >>>>>>>>>> make[1]: Entering directory >>> '/home/piet/Projects/NuttX/ptka/nuttx/libs/libc' >>>>>>>>>> AS: machine/sim/arch_setjmp_arm.S >>>>>>>>>> machine/sim/arch_setjmp_arm.S: Assembler messages: >>>>>>>>>> machine/sim/arch_setjmp_arm.S:39: Error: unknown pseudo-op: >>> `.syntax' >>>>>>>>>> machine/sim/arch_setjmp_arm.S:43: Error: operand 1 must be an >>> integer register -- `mov ip,r0' >>>>>>>>>> machine/sim/arch_setjmp_arm.S:44: Error: unknown mnemonic `stmia' >>> -- `stmia ip!,{v1,v2,v3,v4,v5,v6,sl,fp}' >>>>>>>>>> machine/sim/arch_setjmp_arm.S:45: Error: operand 1 must be an >>> integer register -- `mov r2,sp' >>>>>>>>>> machine/sim/arch_setjmp_arm.S:46: Error: unknown mnemonic `stmia' >>> -- `stmia ip!,{r2,lr}' >>>>>>>>>> machine/sim/arch_setjmp_arm.S:47: Error: operand 1 must be an >>> integer register -- `mov r0,#0' >>>>>>>>>> machine/sim/arch_setjmp_arm.S:75: Error: unknown mnemonic `bx' -- >>> `bx lr' >>>>>>>>>> machine/sim/arch_setjmp_arm.S:77: Error: unknown pseudo-op: >>> `.syntax' >>>>>>>>>> machine/sim/arch_setjmp_arm.S:81: Error: operand 1 must be an >>> integer register -- `mov ip,r0' >>>>>>>>>> machine/sim/arch_setjmp_arm.S:82: Error: operand 1 must be an SVE >>> predicate register -- `movs r0,r1' >>>>>>>>>> machine/sim/arch_setjmp_arm.S:83: Error: unknown mnemonic `moveq' >>> -- `moveq r0,#1' >>>>>>>>>> machine/sim/arch_setjmp_arm.S:84: Error: unknown mnemonic `ldmia' >>> -- `ldmia ip!,{v1,v2,v3,v4,v5,v6,sl,fp}' >>>>>>>>>> machine/sim/arch_setjmp_arm.S:85: Error: unknown mnemonic `ldmia' >>> -- `ldmia ip!,{r2,lr}' >>>>>>>>>> machine/sim/arch_setjmp_arm.S:103: Error: unknown mnemonic `bx' -- >>> `bx lr' >>>>>>>>>> machine/sim/arch_setjmp_arm.S:86: Error: undefined symbol r2 used >>> as an immediate value >>>>>>>>>> make[1]: *** [Makefile:130: bin/arch_setjmp_arm.o] Error 1 >>>>>>>>>> make[1]: Leaving directory >>> '/home/piet/Projects/NuttX/ptka/nuttx/libs/libc' >>>>>>>>>> make: *** [tools/LibTargets.mk:168: libs/libc/libc.a] Error 2 >>>>>>>>>> >>>>>>>>>> ———— >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> Am 29.01.2022 um 19:00 schrieb Peter Kalbus >>> <p...@mailbox.org.INVALID <mailto:p...@mailbox.org.INVALID> <mailto: >>> p...@mailbox.org.INVALID <mailto:p...@mailbox.org.INVALID>>>: >>>>>>>>>>> >>>>>>>>>>> Config and log from my M1: >>>>>>>>>>> >>>>>>>>>>> —————————————— >>>>>>>>>>> >>>>>>>>>>> # >>>>>>>>>>> # This file is autogenerated: PLEASE DO NOT EDIT IT. >>>>>>>>>>> # >>>>>>>>>>> # You can use "make menuconfig" to make any modifications to the >>> installed .config file. >>>>>>>>>>> # You can then do "make savedefconfig" to generate a new >>> defconfig file that includes your >>>>>>>>>>> # modifications. >>>>>>>>>>> # >>>>>>>>>>> # CONFIG_NSH_CMDOPT_HEXDUMP is not set >>>>>>>>>>> CONFIG_ARCH="sim" >>>>>>>>>>> CONFIG_ARCH_BOARD="sim" >>>>>>>>>>> CONFIG_ARCH_BOARD_SIM=y >>>>>>>>>>> CONFIG_ARCH_CHIP="sim" >>>>>>>>>>> CONFIG_ARCH_SIM=y >>>>>>>>>>> CONFIG_BOARDCTL_APP_SYMTAB=y >>>>>>>>>>> CONFIG_BOARDCTL_POWEROFF=y >>>>>>>>>>> CONFIG_BOARD_LOOPSPERMSEC=0 >>>>>>>>>>> CONFIG_BOOT_RUNFROMEXTSRAM=y >>>>>>>>>>> CONFIG_BUILTIN=y >>>>>>>>>>> CONFIG_DEBUG_SYMBOLS=y >>>>>>>>>>> CONFIG_DEV_GPIO=y >>>>>>>>>>> CONFIG_DEV_LOOP=y >>>>>>>>>>> CONFIG_DEV_ZERO=y >>>>>>>>>>> CONFIG_EXAMPLES_GPIO=y >>>>>>>>>>> CONFIG_EXAMPLES_HELLO=y >>>>>>>>>>> CONFIG_FAT_LCNAMES=y >>>>>>>>>>> CONFIG_FAT_LFN=y >>>>>>>>>>> CONFIG_FSUTILS_PASSWD=y >>>>>>>>>>> CONFIG_FSUTILS_PASSWD_READONLY=y >>>>>>>>>>> CONFIG_FS_BINFS=y >>>>>>>>>>> CONFIG_FS_FAT=y >>>>>>>>>>> CONFIG_FS_PROCFS=y >>>>>>>>>>> CONFIG_FS_RAMMAP=y >>>>>>>>>>> CONFIG_FS_ROMFS=y >>>>>>>>>>> CONFIG_GPIO_LOWER_HALF=y >>>>>>>>>>> CONFIG_HOST_ARM=y >>>>>>>>>>> CONFIG_HOST_MACOS=y >>>>>>>>>>> CONFIG_IDLETHREAD_STACKSIZE=4096 >>>>>>>>>>> CONFIG_INIT_ENTRYPOINT="nsh_main" >>>>>>>>>>> CONFIG_IOEXPANDER=y >>>>>>>>>>> CONFIG_IOEXPANDER_DUMMY=y >>>>>>>>>>> CONFIG_LIBC_ENVPATH=y >>>>>>>>>>> CONFIG_LIBC_EXECFUNCS=y >>>>>>>>>>> CONFIG_LIBC_LOCALE=y >>>>>>>>>>> CONFIG_LIBC_LOCALE_CATALOG=y >>>>>>>>>>> CONFIG_LIBC_LOCALE_GETTEXT=y >>>>>>>>>>> CONFIG_NSH_ARCHINIT=y >>>>>>>>>>> CONFIG_NSH_ARCHROMFS=y >>>>>>>>>>> CONFIG_NSH_BUILTIN_APPS=y >>>>>>>>>>> CONFIG_NSH_CONSOLE_LOGIN=y >>>>>>>>>>> CONFIG_NSH_FATDEVNO=2 >>>>>>>>>>> CONFIG_NSH_FILE_APPS=y >>>>>>>>>>> CONFIG_NSH_MOTD=y >>>>>>>>>>> CONFIG_NSH_MOTD_STRING="MOTD: username=admin >>> password=Administrator" >>>>>>>>>>> CONFIG_NSH_READLINE=y >>>>>>>>>>> CONFIG_NSH_ROMFSDEVNO=1 >>>>>>>>>>> CONFIG_NSH_ROMFSETC=y >>>>>>>>>>> CONFIG_PATH_INITIAL="/bin" >>>>>>>>>>> CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=2048 >>>>>>>>>>> CONFIG_PSEUDOFS_ATTRIBUTES=y >>>>>>>>>>> CONFIG_PSEUDOFS_SOFTLINKS=y >>>>>>>>>>> CONFIG_READLINE_TABCOMPLETION=y >>>>>>>>>>> CONFIG_SCHED_HAVE_PARENT=y >>>>>>>>>>> CONFIG_SCHED_HPWORK=y >>>>>>>>>>> CONFIG_SCHED_ONEXIT=y >>>>>>>>>>> CONFIG_SCHED_WAITPID=y >>>>>>>>>>> CONFIG_SDCLONE_DISABLE=y >>>>>>>>>>> CONFIG_START_MONTH=6 >>>>>>>>>>> CONFIG_START_YEAR=2008 >>>>>>>>>>> CONFIG_SYSTEM_NSH=y >>>>>>>>>>> >>>>>>>>>>> —————————————— >>>>>>>>>>> >>>>>>>>>>> for dir in >>> /Users/piet/Projects/NuttX/feature-sim-macos-m1-support/apps sched drivers >>> boards arch/sim/src fs binfmt libs/libc mm ; do \ >>>>>>>>>>> /Applications/Xcode.app/Contents/Developer/usr/bin/make -C >>> $dir EXTRAFLAGS="-D__KERNEL__ " depend || exit; \ >>>>>>>>>>> done >>>>>>>>>>> /Applications/Xcode.app/Contents/Developer/usr/bin/make -C >>> /Users/piet/Projects/NuttX/feature-sim-macos-m1-support/apps/builtin depend >>> APPDIR="/Users/piet/Projects/NuttX/feature-sim-macos-m1-support/apps" >>>>>>>>>>> make[2]: Nothing to be done for `depend'. >>>>>>>>>>> /Applications/Xcode.app/Contents/Developer/usr/bin/make -C >>> /Users/piet/Projects/NuttX/feature-sim-macos-m1-support/apps/examples/gpio >>> depend APPDIR="/Users/piet/Projects/NuttX/feature-sim-macos-m1-support/apps" >>>>>>>>>>> make[2]: Nothing to be done for `depend'. >>>>>>>>>>> /Applications/Xcode.app/Contents/Developer/usr/bin/make -C >>> /Users/piet/Projects/NuttX/feature-sim-macos-m1-support/apps/examples/hello >>> depend APPDIR="/Users/piet/Projects/NuttX/feature-sim-macos-m1-support/apps" >>>>>>>>>>> make[2]: Nothing to be done for `depend'. >>>>>>>>>>> /Applications/Xcode.app/Contents/Developer/usr/bin/make -C >>> /Users/piet/Projects/NuttX/feature-sim-macos-m1-support/apps/fsutils/mkfatfs >>> depend APPDIR="/Users/piet/Projects/NuttX/feature-sim-macos-m1-support/apps" >>>>>>>>>>> make[2]: Nothing to be done for `depend'. >>>>>>>>>>> /Applications/Xcode.app/Contents/Developer/usr/bin/make -C >>> /Users/piet/Projects/NuttX/feature-sim-macos-m1-support/apps/fsutils/passwd >>> depend APPDIR="/Users/piet/Projects/NuttX/feature-sim-macos-m1-support/apps" >>>>>>>>>>> make[2]: Nothing to be done for `depend'. >>>>>>>>>>> /Applications/Xcode.app/Contents/Developer/usr/bin/make -C >>> /Users/piet/Projects/NuttX/feature-sim-macos-m1-support/apps/nshlib depend >>> APPDIR="/Users/piet/Projects/NuttX/feature-sim-macos-m1-support/apps" >>>>>>>>>>> make[2]: Nothing to be done for `depend'. >>>>>>>>>>> /Applications/Xcode.app/Contents/Developer/usr/bin/make -C >>> /Users/piet/Projects/NuttX/feature-sim-macos-m1-support/apps/platform >>> depend APPDIR="/Users/piet/Projects/NuttX/feature-sim-macos-m1-support/apps" >>>>>>>>>>> make[2]: Nothing to be done for `depend'. >>>>>>>>>>> /Applications/Xcode.app/Contents/Developer/usr/bin/make -C >>> /Users/piet/Projects/NuttX/feature-sim-macos-m1-support/apps/system/nsh >>> depend APPDIR="/Users/piet/Projects/NuttX/feature-sim-macos-m1-support/apps" >>>>>>>>>>> make[2]: Nothing to be done for `depend'. >>>>>>>>>>> /Applications/Xcode.app/Contents/Developer/usr/bin/make -C >>> /Users/piet/Projects/NuttX/feature-sim-macos-m1-support/apps/system/readline >>> depend APPDIR="/Users/piet/Projects/NuttX/feature-sim-macos-m1-support/apps" >>>>>>>>>>> make[2]: Nothing to be done for `depend'. >>>>>>>>>>> touch .depend >>>>>>>>>>> make[1]: Nothing to be done for `depend'. >>>>>>>>>>> make[1]: Nothing to be done for `depend'. >>>>>>>>>>> make[1]: Nothing to be done for `depend'. >>>>>>>>>>> make[1]: Nothing to be done for `depend'. >>>>>>>>>>> make[1]: Nothing to be done for `depend'. >>>>>>>>>>> make[1]: Nothing to be done for `depend'. >>>>>>>>>>> make[1]: Nothing to be done for `depend'. >>>>>>>>>>> make[1]: Nothing to be done for `depend'. >>>>>>>>>>> /Applications/Xcode.app/Contents/Developer/usr/bin/make -C sched >>> libsched.a EXTRAFLAGS="-D__KERNEL__ " >>>>>>>>>>> make[1]: `libsched.a' is up to date. >>>>>>>>>>> /Applications/Xcode.app/Contents/Developer/usr/bin/make -C >>> drivers libdrivers.a EXTRAFLAGS="-D__KERNEL__ " >>>>>>>>>>> make[1]: `libdrivers.a' is up to date. >>>>>>>>>>> /Applications/Xcode.app/Contents/Developer/usr/bin/make -C boards >>> libboards.a EXTRAFLAGS="-D__KERNEL__ " >>>>>>>>>>> make[1]: `libboards.a' is up to date. >>>>>>>>>>> /Applications/Xcode.app/Contents/Developer/usr/bin/make -C >>> libs/libc libc.a EXTRAFLAGS="" >>>>>>>>>>> AS: machine/sim/arch_setjmp_arm.S >>>>>>>>>>> cc -c -Wall -Wstrict-prototypes -Wshadow -Wundef -g -fno-builtin >>> -fvisibility=hidden -fno-common -isystem >>> "/Users/piet/Projects/NuttX/feature-sim-macos-m1-support/nuttx/include" >>> -D__NuttX__ -U_AIX -U_WIN32 -U__APPLE__ -U__FreeBSD__ -U__NetBSD__ >>> -U__linux__ -U__sun__ -U__unix__ >>> -U__ENVIRONMENT_MAC_OS_X_VERSION_MIN_REQUIRED__ -pipe -D__ASSEMBLY__ >>> machine/sim/arch_setjmp_arm.S -o bin/arch_setjmp_arm.o >>>>>>>>>>> machine/sim/arch_setjmp_arm.S:38:1: error: unknown directive >>>>>>>>>>> .syntax unified >>>>>>>>>>> ^ >>>>>>>>>>> machine/sim/arch_setjmp_arm.S:40:1: error: unknown directive >>>>>>>>>>> .type setjmp,%function >>>>>>>>>>> ^ >>>>>>>>>>> machine/sim/arch_setjmp_arm.S:42:6: error: invalid operand for >>> instruction >>>>>>>>>>> mov ip,r0 >>>>>>>>>>> ^ >>>>>>>>>>> machine/sim/arch_setjmp_arm.S:43:31: error: vector register >>> expected >>>>>>>>>>> stmia ip!,{v1,v2,v3,v4,v5,v6,sl,fp} >>>>>>>>>>> ^ >>>>>>>>>>> machine/sim/arch_setjmp_arm.S:44:6: error: invalid operand for >>> instruction >>>>>>>>>>> mov r2,sp >>>>>>>>>>> ^ >>>>>>>>>>> machine/sim/arch_setjmp_arm.S:45:13: error: vector register >>> expected >>>>>>>>>>> stmia ip!,{r2,lr} >>>>>>>>>>> ^ >>>>>>>>>>> machine/sim/arch_setjmp_arm.S:46:6: error: invalid operand for >>> instruction >>>>>>>>>>> mov r0,#0 >>>>>>>>>>> ^ >>>>>>>>>>> machine/sim/arch_setjmp_arm.S:48:4: error: unrecognized >>> instruction mnemonic, did you mean: b, bcax, bl, br, sb, tbx? >>>>>>>>>>> 3: bx lr >>>>>>>>>>> ^ >>>>>>>>>>> machine/sim/arch_setjmp_arm.S:50:1: error: unknown directive >>>>>>>>>>> .syntax unified >>>>>>>>>>> ^ >>>>>>>>>>> machine/sim/arch_setjmp_arm.S:52:1: error: unknown directive >>>>>>>>>>> .type longjmp,%function >>>>>>>>>>> ^ >>>>>>>>>>> machine/sim/arch_setjmp_arm.S:54:6: error: invalid operand for >>> instruction >>>>>>>>>>> mov ip,r0 >>>>>>>>>>> ^ >>>>>>>>>>> machine/sim/arch_setjmp_arm.S:55:7: error: invalid operand for >>> instruction >>>>>>>>>>> movs r0,r1 >>>>>>>>>>> ^ >>>>>>>>>>> machine/sim/arch_setjmp_arm.S:56:2: error: unrecognized >>> instruction mnemonic, did you mean: mov? >>>>>>>>>>> moveq r0,#1 >>>>>>>>>>> ^ >>>>>>>>>>> machine/sim/arch_setjmp_arm.S:57:32: error: vector register >>> expected >>>>>>>>>>> ldmia ip!, {v1,v2,v3,v4,v5,v6,sl,fp} >>>>>>>>>>> ^ >>>>>>>>>>> machine/sim/arch_setjmp_arm.S:58:14: error: vector register >>> expected >>>>>>>>>>> ldmia ip!, {r2,lr} >>>>>>>>>>> ^ >>>>>>>>>>> machine/sim/arch_setjmp_arm.S:59:9: error: expected compatible >>> register or logical immediate >>>>>>>>>>> mov sp,r2 >>>>>>>>>>> ^ >>>>>>>>>>> machine/sim/arch_setjmp_arm.S:61:4: error: unrecognized >>> instruction mnemonic, did you mean: b, bcax, bl, br, sb, tbx? >>>>>>>>>>> 3: bx lr >>>>>>>>>>> ^ >>>>>>>>>>> make[1]: *** [bin/arch_setjmp_arm.o] Error 1 >>>>>>>>>>> make: *** [libs/libc/libc.a] Error 2 >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>> Am 29.01.2022 um 18:40 schrieb Peter Kalbus >>> <p...@mailbox.org.INVALID <mailto:p...@mailbox.org.INVALID> <mailto: >>> p...@mailbox.org.INVALID <mailto:p...@mailbox.org.INVALID>>>: >>>>>>>>>>>> >>>>>>>>>>>> Hi, >>>>>>>>>>>> >>>>>>>>>>>> I’m using NuttX on a M1 MacBook Air since a couple of months. >>>>>>>>>>>> I’ve no issues to get NuttX compiled for my RP2040 based targets. >>>>>>>>>>>> >>>>>>>>>>>> But I can confirm, that the Sim configuration sim:nsh not >>> working. >>>>>>>>>>>> >>>>>>>>>>>> Currently, I see there are two issues: >>>>>>>>>>>> >>>>>>>>>>>> /1/ M1 „Host CPU Type“ is detected as x86_64, but not as „arm“ >>>>>>>>>>>> Workarround for this is, to set it manually in the >>> configuration >>>>>>>>>>>> >>>>>>>>>>>> /2/ At least the following files are not compilable >>>>>>>>>>>> arch/sim/src/sim/up_vfork_arm.S < >>> https://github.com/ptka/incubator-nuttx#diff-fd079323b0636ac4012f50afe8c5555656d7a760b0429f46188919fe7807f8a5 >>> < >>> https://github.com/ptka/incubator-nuttx#diff-fd079323b0636ac4012f50afe8c5555656d7a760b0429f46188919fe7807f8a5> >>> < >>> https://github.com/ptka/incubator-nuttx#diff-fd079323b0636ac4012f50afe8c5555656d7a760b0429f46188919fe7807f8a5 >>> < >>> https://github.com/ptka/incubator-nuttx#diff-fd079323b0636ac4012f50afe8c5555656d7a760b0429f46188919fe7807f8a5 >>>>>> >>>>>>>>>>>> libs/libc/machine/sim/arch_setjmp_arm.S < >>> https://github.com/ptka/incubator-nuttx#diff-cffded10274b4845aae8c75bd91550d140214585ea17d47f2cf01dd021a16abe >>> < >>> https://github.com/ptka/incubator-nuttx#diff-cffded10274b4845aae8c75bd91550d140214585ea17d47f2cf01dd021a16abe> >>> < >>> https://github.com/ptka/incubator-nuttx#diff-cffded10274b4845aae8c75bd91550d140214585ea17d47f2cf01dd021a16abe >>> < >>> https://github.com/ptka/incubator-nuttx#diff-cffded10274b4845aae8c75bd91550d140214585ea17d47f2cf01dd021a16abe >>>>>> >>>>>>>>>>>> libs/libc/stdio/lib_libvsprintf.c < >>> https://github.com/ptka/incubator-nuttx#diff-befc8e04ddb3722f024f65ffd7648aac1cb24846d2b80fff6328e3cb5862220f >>> < >>> https://github.com/ptka/incubator-nuttx#diff-befc8e04ddb3722f024f65ffd7648aac1cb24846d2b80fff6328e3cb5862220f> >>> < >>> https://github.com/ptka/incubator-nuttx#diff-befc8e04ddb3722f024f65ffd7648aac1cb24846d2b80fff6328e3cb5862220f >>> < >>> https://github.com/ptka/incubator-nuttx#diff-befc8e04ddb3722f024f65ffd7648aac1cb24846d2b80fff6328e3cb5862220f >>>>>> >>>>>>>>>>>> >>>>>>>>>>>> The 2nd point could be related to a wrong compiler/assembler >>> selected >>>>>>>>>>>> or the way, the compiler is invoked. In worst case, it’s there >>> code itself. >>>>>>>>>>>> >>>>>>>>>>>> I would be very interested helping to find a solution on this >>> topic. >>>>>>>>>>>> >>>>>>>>>>>> /Piet >>>>>>>>>>>> >>>>>>>>>>>>> Am 29.01.2022 um 17:33 schrieb Tomasz CEDRO <to...@cedro.info >>> <mailto:to...@cedro.info> <mailto:to...@cedro.info <mailto: >>> to...@cedro.info>>>: >>>>>>>>>>>>> >>>>>>>>>>>>> macOS is a BSD.. very close to FreeBSD: >>>>>>>>>>>>> 1. Use gmake. >>>>>>>>>>>>> 2. Make sure you have the right version of kconfig-frontends >>> package >>>>>>>>>>>>> installed. If you installed it locally make sure path to your >>> local >>>>>>>>>>>>> binary is in the first place. >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> CeDeROM, SQ7MHZ, http://www.tomek.cedro.info < >>> http://www.tomek.cedro.info/> <http://www.tomek.cedro.info/ < >>> http://www.tomek.cedro.info/>> >>>>>>>> >>>>>> >>>>> >>>> >>> >
