Hi! Well, I was finally able to reproduce something similar to what you've reported. When I switched to ` nuttx-12.2.1`, I was able to see the NuttShell console indication but I wasn't able to type anything on it.
Could you please get nuttx from git e build from master? I did the same and I applied the following patch to the `blewifi` defconfig: ``` diff --git a/boards/xtensa/esp32/esp32-devkitc/configs/blewifi/defconfig b/boards/xtensa/esp32/esp32-devkitc/configs/blewifi/defconfig index c988cbc1d7..bb4db27b14 100644 --- a/boards/xtensa/esp32/esp32-devkitc/configs/blewifi/defconfig +++ b/boards/xtensa/esp32/esp32-devkitc/configs/blewifi/defconfig @@ -6,7 +6,6 @@ # modifications. # # CONFIG_ARCH_LEDS is not set -# CONFIG_NDEBUG is not set # CONFIG_NSH_ARGCAT is not set # CONFIG_NSH_CMDOPT_HEXDUMP is not set CONFIG_ALLOW_BSD_COMPONENTS=y @@ -25,6 +24,16 @@ CONFIG_BOARDCTL_RESET=y CONFIG_BOARD_LOOPSPERMSEC=16717 CONFIG_BTSAK=y CONFIG_BUILTIN=y +CONFIG_DEBUG_ASSERTIONS=y +CONFIG_DEBUG_ASSERTIONS_EXPRESSION=y +CONFIG_DEBUG_ERROR=y +CONFIG_DEBUG_FEATURES=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_WARN=y +CONFIG_DEBUG_WIRELESS=y +CONFIG_DEBUG_WIRELESS_ERROR=y +CONFIG_DEBUG_WIRELESS_INFO=y +CONFIG_DEBUG_WIRELESS_WARN=y CONFIG_DEFAULT_TASK_STACKSIZE=4096 CONFIG_DEV_URANDOM=y CONFIG_DISABLE_MQUEUE_NOTIFICATION=y @@ -32,6 +41,7 @@ CONFIG_DRIVERS_BLUETOOTH=y CONFIG_DRIVERS_IEEE80211=y CONFIG_DRIVERS_WIRELESS=y CONFIG_ESP32_BLE=y +CONFIG_ESP32_MERGE_BINS=y CONFIG_ESP32_RT_TIMER_TASK_STACK_SIZE=4096 CONFIG_ESP32_SPIFLASH=y CONFIG_ESP32_SPIFLASH_SPIFFS=y ``` `CONFIG_ESP32_MERGE_BINS` merges the bootloader and NuttX in a single binary. Please download it from https://drive.google.com/file/d/1poFsQpZ_SW7X_5FOHWYMVfAln3uBfO-S/view?usp=sharing and try to flash it to your device (sha256: 40bcb3817eb3a0458161e35a2d08bbd663d7c16b197cdebe0cfeaa2529e8a684) `esptool.py -c esp32 -p /dev/ttyUSB0 -b 921600 erase_flash && esptool.py -c esp32 -p /dev/ttyUSB0 -b 921600 write_flash -fs detect -fm dio 0x0 nuttx.merged.bin && minicom -D /dev/ttyUSB0` Tell me about your results. If it doesn't work, report me your console results and run the following tests using the same `esptool.py`: `esptool.py -c esp32 -p /dev/ttyUSB0 -b 921600 chip_id && esptool.py -c esp32 -p /dev/ttyUSB0 -b 921600 flash_id` Best regards, Em sex., 1 de set. de 2023 às 11:26, Lucas Vaz <lucas....@espressif.com.invalid> escreveu: > The make bootloader command, by default, downloads the most recent > pre-compiled binaries. Downloading them manually can still be done as long > as you make sure you are grabbing the most recent version. You can also > build it (or MCUboot) from source by changing the image configuration > options in the menuconfig. > > Cheers, > Lucas > ________________________________ > From: Mike Moretti <nu...@mordent.com.INVALID> > Sent: Friday, September 1, 2023 11:14 > To: dev@nuttx.apache.org <dev@nuttx.apache.org> > Subject: Re: Adding bluetooth configuration on esp32 hangs nsh > > [External: This email originated outside Espressif] > > <irony>Wait, so you're telling me I should submit a PR, but you spent > the time to document this on your own web site instead of submitting a > PR to the official NuttX docs yourself?</irony> ;-) > > -m > > On 9/1/2023 10:02 AM, Alan C. Assis wrote: > > Probably because we didn't update the documentation yet! :-) > > > > <irony> We're developers, we don't care about documentation... > > documentation is for wimps! </irony> > > > > Of course we need to improve our documentation! This is why all new PR > > introducing some new feature I insist to people include documentation. > > > > Please consider submitting a patch fixing it. > > > > BR, > > > > Alan > > > > On 9/1/23, Mike Moretti <nu...@mordent.com.invalid> wrote: > >> Wait, so, the NuttX docs say to just download the bootloader/partitions > >> from some link. If we have to make the bootloader ourselves why isn't > >> that part of the NuttX official documentation? > >> > >> -m > >> > >> On 9/1/2023 9:13 AM, Alan C. Assis wrote: > >>> Hi Mike, > >>> > >>> Please sure you are using the right bootloader too: > >>> > >>> > https://acassis.wordpress.com/2022/09/27/flashing-nuttx-bootloader-and-firmware-using-make-command/ > >>> > >>> BR, > >>> > >>> Alan > >>> > >>> On 9/1/23, Mike Moretti <nu...@mordent.com.invalid> wrote: > >>>> Hi, > >>>> > >>>> So, just to be sure, I made a completely fresh directory, untarred the > >>>> 12.2.1 tarballs into it, did ./tools/configure.sh > esp32-devkitc:blewifi, > >>>> changed only DEBUG_ASSERTIONS and DEBUG_ASSERTIONS_EXPRESSION and then > >>>> flashed. It boots to nsh but then doesn't accept any input; it's > hung. > >>>> If I have my wifi credentials in the config, so many messages come > out I > >>>> can't tell if it displayed the nsh prompt, but the last thing I see > >>>> before it hangs and doesn't accept any input is some message about > wifi > >>>> (I'm assuming it connected). > >>>> > >>>> I then tried, after yet another rm+untar (yes, I'm removing both nuttx > >>>> and apps and re-untarring them), to configure esp32-devkitc:nxdiag, > but > >>>> it wouldn't build. > >>>> > >>>> I then remembered that since I use esp-idf v4.4.5 (on Ubuntu 22.04 > LTS) > >>>> for other projects, I've just been use the toolchain that comes with > it > >>>> instead of the "latest" one recommend via the NuttX docs link. > >>>> Unfortunately, it's a way older version of the gcc toolchain (gcc-8.4 > vs > >>>> gcc-12.2). > >>>> > >>>> So I installed the newer toolchain and esptool.py as directed by the > >>>> NuttX documentation. I then opened a new shell without running the > >>>> ESP-IDF environment setup script, manually set my path to include the > >>>> new toolchain, and tried again. However, after yet another rm+untar > and > >>>> rebuilding blewifi + ASSERT configs with the newer toolchain, I still > >>>> get the same problem with it hanging. > >>>> > >>>> But luckily, with the newer toolchain, I'm at least able to build and > >>>> run nxdiag and here is the output: > >>>> > >>>> nxdiag --all > >>>> Nxdiag Report: > >>>> > >>>> NuttX RTOS info: > >>>> Hostname: > >>>> Release: 12.2.1 > >>>> Build: 148c631a2d Sep 1 2023 08:45:59 > >>>> Arch: xtensa > >>>> Defconfig: esp32-devkitc:nxdiag > >>>> > >>>> NuttX CFLAGS: > >>>> -fno-common > >>>> -Wall > >>>> -Wstrict-prototypes > >>>> -Wshadow > >>>> -Wundef > >>>> -Os > >>>> -fno-strict-aliasing > >>>> -fomit-frame-pointer > >>>> -ffunction-sections > >>>> -fdata-sections > >>>> -mlongcalls > >>>> -isystem /home/mmoretti/work/nuttx-12.2.1/nuttx/include > >>>> -D__NuttX__ > >>>> -DNDEBUG > >>>> -pipe > >>>> -I "/home/mmoretti/work/nuttx-12.2.1/apps/include" > >>>> > >>>> NuttX CXXFLAGS: > >>>> -fno-common > >>>> -nostdinc++ > >>>> -Wall > >>>> -Wshadow > >>>> -Wundef > >>>> -std="gnu++17" > >>>> -fno-exceptions > >>>> -fcheck-new > >>>> -fno-rtti > >>>> -Os > >>>> -fno-strict-aliasing > >>>> -fomit-frame-pointer > >>>> -ffunction-sections > >>>> -fdata-sections > >>>> -mlongcalls > >>>> -isystem /home/mmoretti/work/nuttx-12.2.1/nuttx/include/cxx > >>>> -isystem /home/mmoretti/work/nuttx-12.2.1/nuttx/include > >>>> -D__NuttX__ > >>>> -DNDEBUG > >>>> -pipe > >>>> -I "/home/mmoretti/work/nuttx-12.2.1/apps/include" > >>>> > >>>> NuttX LDFLAGS: > >>>> -nostdlib > >>>> --gc-sections > >>>> --cref > >>>> -Map=/home/mmoretti/work/nuttx-12.2.1/nuttx/nuttx.map > >>>> > >>>> NuttX configuration options: > >>>> CONFIG_HOST_LINUX=y > >>>> CONFIG_APPS_DIR="../apps" > >>>> CONFIG_BASE_DEFCONFIG="esp32-devkitc:nxdiag" > >>>> CONFIG_BUILD_FLAT=y > >>>> CONFIG_INTELHEX_BINARY=y > >>>> CONFIG_ARCH_HAVE_STDARG_H=y > >>>> CONFIG_ARCH_HAVE_SETJMP=y > >>>> CONFIG_ARCH_NONE_DEBUG_H=y > >>>> CONFIG_FORTIFY_SOURCE=0 > >>>> CONFIG_NDEBUG=y > >>>> CONFIG_DEBUG_ALERT=y > >>>> CONFIG_ARCH_HAVE_STACKCHECK=y > >>>> CONFIG_ARCH_HAVE_CUSTOMOPT=y > >>>> CONFIG_DEBUG_FULLOPT=y > >>>> CONFIG_DEBUG_OPT_UNUSED_SECTIONS=y > >>>> CONFIG_DEBUG_LINK_MAP=y > >>>> CONFIG_ARCH_XTENSA=y > >>>> CONFIG_ARCH="xtensa" > >>>> CONFIG_ARCH_CHIP="esp32" > >>>> CONFIG_ARCH_BOARD="esp32-devkitc" > >>>> CONFIG_ARCH_CHIP_ESP32=y > >>>> CONFIG_ARCH_FAMILY_LX6=y > >>>> CONFIG_XTENSA_CP_INITSET=0x0001 > >>>> CONFIG_XTENSA_DUMPBT_ON_ASSERT=y > >>>> CONFIG_XTENSA_BTDEPTH=50 > >>>> CONFIG_XTENSA_TOOLCHAIN_ESP=y > >>>> CONFIG_ARCH_CHIP_ESP32WROVER=y > >>>> CONFIG_ESP32_DUAL_CPU=y > >>>> CONFIG_ESP32_FLASH_4M=y > >>>> CONFIG_ESP32_FLASH_DETECT=y > >>>> CONFIG_ESP32_PSRAM_8M=y > >>>> CONFIG_ESP32_ESP32DXWDXX=y > >>>> CONFIG_ESP32_DEFAULT_CPU_FREQ_240=y > >>>> CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ=240 > >>>> CONFIG_ESP32_XTAL_40MZ=y > >>>> CONFIG_ESP32_UART=y > >>>> CONFIG_ESP32_RTC=y > >>>> CONFIG_ESP32_UART0=y > >>>> CONFIG_ESP32_BT_RESERVE_DRAM=0 > >>>> CONFIG_ESP32_TRACEMEM_RESERVE_DRAM=0 > >>>> CONFIG_ESP32_ULP_COPROC_RESERVE_MEM=0 > >>>> CONFIG_ESP32_UART0_TXPIN=1 > >>>> CONFIG_ESP32_UART0_RXPIN=3 > >>>> CONFIG_ESP32_FLASH_MODE_DIO=y > >>>> CONFIG_ESP32_FLASH_FREQ_40M=y > >>>> CONFIG_ESP32_RTC_CLK_SRC_INT_RC=y > >>>> CONFIG_ESP32_APP_FORMAT_LEGACY=y > >>>> CONFIG_ESP32_BOOTLOADER_DOWNLOAD_PREBUILT=y > >>>> CONFIG_ESP32_PARTITION_TABLE_OFFSET=0x8000 > >>>> CONFIG_ARCH_TOOLCHAIN_GNU=y > >>>> CONFIG_LTO_NONE=y > >>>> CONFIG_ARCH_VECNOTIRQ=y > >>>> CONFIG_ARCH_HAVE_TEXT_HEAP=y > >>>> CONFIG_ARCH_HAVE_MULTICPU=y > >>>> CONFIG_ARCH_HAVE_FPU=y > >>>> CONFIG_ARCH_HAVE_MPU=y > >>>> CONFIG_ARCH_HAVE_RESET=y > >>>> CONFIG_ARCH_HAVE_TESTSET=y > >>>> CONFIG_ARCH_HAVE_SYSCALL_HOOKS=y > >>>> CONFIG_ARCH_HAVE_BACKTRACE=y > >>>> CONFIG_ARCH_HAVE_BOOTLOADER=y > >>>> CONFIG_ARCH_HAVE_CPUINFO=y > >>>> CONFIG_ARCH_FPU=y > >>>> CONFIG_ARCH_STACKDUMP=y > >>>> CONFIG_ARCH_STACKDUMP_MAX_LENGTH=0 > >>>> CONFIG_BOARD_LOOPSPERMSEC=16717 > >>>> CONFIG_ARCH_HAVE_INTERRUPTSTACK=y > >>>> CONFIG_ARCH_INTERRUPTSTACK=0 > >>>> CONFIG_BOOT_RUNFROMFLASH=y > >>>> CONFIG_RAM_START=0x20000000 > >>>> CONFIG_RAM_SIZE=114688 > >>>> CONFIG_ARCH_BOARD_ESP32_DEVKITC=y > >>>> CONFIG_ARCH_HAVE_LEDS=y > >>>> CONFIG_ARCH_HAVE_BUTTONS=y > >>>> CONFIG_ARCH_BOARD_COMMON=y > >>>> CONFIG_BOARDCTL=y > >>>> CONFIG_BOARDCTL_MKRD=y > >>>> CONFIG_DISABLE_OS_API=y > >>>> CONFIG_USEC_PER_TICK=10000 > >>>> CONFIG_START_YEAR=2011 > >>>> CONFIG_START_MONTH=12 > >>>> CONFIG_START_DAY=6 > >>>> CONFIG_PREALLOC_TIMERS=4 > >>>> CONFIG_INIT_ENTRY=y > >>>> CONFIG_INIT_ARGS="" > >>>> CONFIG_INIT_STACKSIZE=2048 > >>>> CONFIG_INIT_PRIORITY=100 > >>>> CONFIG_INIT_ENTRYPOINT="nsh_main" > >>>> CONFIG_INIT_ENTRYNAME="nsh_main" > >>>> CONFIG_RR_INTERVAL=200 > >>>> CONFIG_TASK_NAME_SIZE=31 > >>>> CONFIG_SCHED_WAITPID=y > >>>> CONFIG_PTHREAD_MUTEX_ROBUST=y > >>>> CONFIG_PTHREAD_MUTEX_DEFAULT_PRIO_NONE=y > >>>> CONFIG_PTHREAD_CLEANUP_STACKSIZE=0 > >>>> CONFIG_DEV_CONSOLE=y > >>>> CONFIG_NFILE_DESCRIPTORS_PER_BLOCK=8 > >>>> CONFIG_FILE_STREAM=y > >>>> CONFIG_NAME_MAX=32 > >>>> CONFIG_PATH_MAX=256 > >>>> CONFIG_SIG_PREALLOC_IRQ_ACTIONS=8 > >>>> CONFIG_PREALLOC_MQ_MSGS=8 > >>>> CONFIG_PREALLOC_MQ_IRQ_MSGS=8 > >>>> CONFIG_MQ_MAXMSGSIZE=32 > >>>> CONFIG_DEFAULT_TASK_STACKSIZE=2048 > >>>> CONFIG_IDLETHREAD_STACKSIZE=3072 > >>>> CONFIG_PTHREAD_STACK_MIN=256 > >>>> CONFIG_PTHREAD_STACK_DEFAULT=2048 > >>>> CONFIG_ARCH_HAVE_I2CRESET=y > >>>> CONFIG_DEV_NULL=y > >>>> CONFIG_DRVR_MKRD=y > >>>> CONFIG_ARCH_HAVE_SERIAL_TERMIOS=y > >>>> CONFIG_SERIAL=y > >>>> CONFIG_SERIAL_CONSOLE=y > >>>> CONFIG_MCU_SERIAL=y > >>>> CONFIG_STANDARD_SERIAL=y > >>>> CONFIG_SERIAL_NPOLLWAITERS=4 > >>>> CONFIG_UART0_SERIAL_CONSOLE=y > >>>> CONFIG_UART0_SERIALDRIVER=y > >>>> CONFIG_UART0_RXBUFSIZE=256 > >>>> CONFIG_UART0_TXBUFSIZE=256 > >>>> CONFIG_UART0_BAUD=115200 > >>>> CONFIG_UART0_BITS=8 > >>>> CONFIG_UART0_PARITY=0 > >>>> CONFIG_UART0_2STOP=0 > >>>> CONFIG_SYSLOG_MAX_CHANNELS=1 > >>>> CONFIG_SYSLOG_DEVPATH="/dev/ttyS1" > >>>> CONFIG_SYSLOG_DEFAULT=y > >>>> CONFIG_FS_NEPOLL_DESCRIPTORS=8 > >>>> CONFIG_SENDFILE_BUFSIZE=512 > >>>> CONFIG_FS_MQUEUE_VFS_PATH="/var/mqueue" > >>>> CONFIG_FS_MQUEUE_NPOLLWAITERS=4 > >>>> CONFIG_FS_ANONMAP=y > >>>> CONFIG_FS_PROCFS=y > >>>> CONFIG_FS_PROCFS_MAX_TASKS=128 > >>>> CONFIG_NXFONTS_PACKEDMSFIRST=y > >>>> CONFIG_MM_DEFAULT_MANAGER=y > >>>> CONFIG_MM_DFAULT_ALIGNMENT=0 > >>>> CONFIG_MM_REGIONS=3 > >>>> CONFIG_MM_HEAP_MEMPOOL_THRESHOLD=0 > >>>> CONFIG_MM_BACKTRACE=-1 > >>>> CONFIG_STDIO_BUFFER_SIZE=64 > >>>> CONFIG_STDIO_LINEBUFFER=y > >>>> CONFIG_NUNGET_CHARS=2 > >>>> CONFIG_LIBC_FLOATINGPOINT=y > >>>> CONFIG_LIBC_LONG_LONG=y > >>>> CONFIG_ARCH_LOWPUTC=y > >>>> CONFIG_LIBC_ARCH_ATOMIC=y > >>>> CONFIG_LIBC_ARCH_MEMCHR=y > >>>> CONFIG_LIBC_ARCH_MEMCPY=y > >>>> CONFIG_LIBC_ARCH_MEMCMP=y > >>>> CONFIG_LIBC_ARCH_MEMMOVE=y > >>>> CONFIG_LIBC_ARCH_MEMSET=y > >>>> CONFIG_LIBC_ARCH_STRCHR=y > >>>> CONFIG_LIBC_ARCH_STRCMP=y > >>>> CONFIG_LIBC_ARCH_STRCPY=y > >>>> CONFIG_LIBC_ARCH_STRLCPY=y > >>>> CONFIG_LIBC_ARCH_STRNCPY=y > >>>> CONFIG_LIBC_ARCH_STRLEN=y > >>>> CONFIG_LIBC_ARCH_STRNLEN=y > >>>> CONFIG_LIBC_PREVENT_STRING_KERNEL=y > >>>> CONFIG_LIBC_RAND_ORDER=1 > >>>> CONFIG_LIBC_HOMEDIR="/" > >>>> CONFIG_LIBC_TMPDIR="/tmp" > >>>> CONFIG_LIBC_MAX_TMPFILE=32 > >>>> CONFIG_LIBC_MAX_EXITFUNS=0 > >>>> CONFIG_POSIX_SPAWN_DEFAULT_STACKSIZE=2048 > >>>> CONFIG_LIBC_HOSTNAME="" > >>>> CONFIG_LIBC_OPEN_MAX=256 > >>>> CONFIG_LIBC_STRERROR_ERRNUM=y > >>>> CONFIG_LIBC_STRSIGNAL=y > >>>> CONFIG_TLS_NELEM=4 > >>>> CONFIG_TLS_TASK_NELEM=0 > >>>> CONFIG_LIBC_GAISTRERROR_ERRNUM=y > >>>> CONFIG_LIBC_FTOK_VFS_PATH="/var/ftok" > >>>> CONFIG_LIBC_MEMFD_ERROR=y > >>>> CONFIG_BUILTIN=y > >>>> CONFIG_STREAM_OUT_BUFFER_SIZE=64 > >>>> CONFIG_STREAM_HEXDUMP_BUFFER_SIZE=128 > >>>> CONFIG_LIBM_TOOLCHAIN=y > >>>> CONFIG_HAVE_CXX=y > >>>> CONFIG_HAVE_CXXINITIALIZE=y > >>>> CONFIG_LIBCXXMINI=y > >>>> CONFIG_CXX_STANDARD="gnu++17" > >>>> CONFIG_NSH_LIBRARY=y > >>>> CONFIG_NSH_PROMPT_STRING="nsh> " > >>>> CONFIG_NSH_READLINE=y > >>>> CONFIG_NSH_LINELEN=64 > >>>> CONFIG_NSH_MAXARGUMENTS=7 > >>>> CONFIG_NSH_NESTDEPTH=3 > >>>> CONFIG_NSH_ALIAS=y > >>>> CONFIG_NSH_ALIAS_MAX_AMOUNT=1 > >>>> CONFIG_NSH_BUILTIN_APPS=y > >>>> CONFIG_NSH_DISABLE_DATE=y > >>>> CONFIG_NSH_DISABLE_LOSMART=y > >>>> CONFIG_NSH_DISABLE_LOMTD=y > >>>> CONFIG_NSH_DISABLE_MB=y > >>>> CONFIG_NSH_DISABLE_MH=y > >>>> CONFIG_NSH_DISABLE_MW=y > >>>> CONFIG_NSH_DISABLE_TIMEDATECTL=y > >>>> CONFIG_NSH_CODECS_BUFSIZE=128 > >>>> CONFIG_NSH_PROC_MOUNTPOINT="/proc" > >>>> CONFIG_NSH_FILEIOSIZE=512 > >>>> CONFIG_NSH_CONSOLE=y > >>>> CONFIG_NSH_ARCHINIT=y > >>>> CONFIG_SYSTEM_NSH=y > >>>> CONFIG_SYSTEM_NSH_PRIORITY=100 > >>>> CONFIG_SYSTEM_NSH_STACKSIZE=2048 > >>>> CONFIG_SYSTEM_NSH_PROGNAME="nsh" > >>>> CONFIG_SYSTEM_NXDIAG=y > >>>> CONFIG_SYSTEM_NXDIAG_PRIORITY=100 > >>>> CONFIG_SYSTEM_NXDIAG_STACKSIZE=2048 > >>>> CONFIG_SYSTEM_NXDIAG_CONF=y > >>>> CONFIG_SYSTEM_NXDIAG_COMP_FLAGS=y > >>>> CONFIG_SYSTEM_NXDIAG_HOST_PATH=y > >>>> CONFIG_SYSTEM_NXDIAG_ESPRESSIF=y > >>>> CONFIG_SYSTEM_READLINE=y > >>>> CONFIG_READLINE_HAVE_EXTMATCH=y > >>>> CONFIG_READLINE_ECHO=y > >>>> > >>>> Host system OS: > >>>> Ubuntu 22.04.3 LTS Linux gigue 6.2.0-26-generic > #26~22.04.1-Ubuntu > >>>> SMP PREEMPT_DYNAMIC Thu Jul 13 16:27:29 UTC 2 x86_64 x86_64 > >>>> > >>>> Host system PATH: > >>>> /home/mmoretti/tools/xtensa-esp32-elf-12.2.0_20230208/bin > >>>> /home/mmoretti/bin > >>>> /home/mmoretti/tools/bin > >>>> /home/mmoretti/bin > >>>> /home/mmoretti/tools/bin > >>>> /home/mmoretti/.local/bin > >>>> /usr/local/sbin > >>>> /usr/local/bin > >>>> /usr/sbin > >>>> /usr/bin > >>>> /sbin > >>>> /bin > >>>> /usr/games > >>>> /usr/local/games > >>>> /snap/bin > >>>> > >>>> Espressif specific information: > >>>> > >>>> Bootloader version: > >>>> esp32: v5.1-dev-3972-g1559b6309f > >>>> esp32s2: Bootloader image not found > >>>> esp32s3: Bootloader image not found > >>>> esp32c2: Bootloader image not found > >>>> esp32c3: Bootloader image not found > >>>> esp32c6: Bootloader image not found > >>>> esp32h2: Bootloader image not found > >>>> > >>>> Toolchain version: > >>>> clang: Not found > >>>> gcc: gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0 > >>>> xtensa-esp32-elf-gcc: xtensa-esp32-elf-gcc (crosstool-NG > >>>> esp-12.2.0_20230208) 12.2.0 > >>>> xtensa-esp32s2-elf-gcc: Not found > >>>> xtensa-esp32s3-elf-gcc: Not found > >>>> riscv32-esp-elf-gcc: Not found > >>>> riscv64-unknown-elf-gcc: Not found > >>>> > >>>> Esptool version: 4.6.2 > >>>> > >>>> nsh> > >>>> > >>>> > >>>> -m > >>>> > >>>> On 9/1/2023 8:13 AM, Tiago Medicci Serrano wrote: > >>>>> Hi Mike, > >>>>> > >>>>> We have been using NuttX on ESP32 for a while. The > >>>>> `esp32-devkitc:blewifi` > >>>>> is run by our internal pipeline (which sets the `DEBUG_ASSERTIONS` > and > >>>>> `DEBUG_ASSERTIONS_EXPRESSION`, btw) and we had no problems running > it. > >>>>> > >>>>> Again: please use the `esp32-devkitc:nxdiag` configuration and run > the > >>>>> `nxdiag -all` from the NSH (please refer to > >>>>> > https://nuttx.apache.org/docs/latest/platforms/xtensa/esp32/boards/esp32-devkitc/index.html#nxdiag > ). > >>>>> Please share your results for reevaluation ;) > >>>>> > >>>>> Best regards, > >>>>> > >>>>> Em qui., 31 de ago. de 2023 às 14:00, Mike Moretti > >>>>> <nu...@mordent.com.invalid> escreveu: > >>>>> > >>>>>> It appears that when using the blewifi configuration out of the box, > >>>>>> and > >>>>>> just turning on DEBUG_ASSERTIONS and DEBUG_ASSERTIONS_EXPRESSION, > and > >>>>>> setting wifi ssid/pw causes the esp32 to hang. This is as far as > I've > >>>>>> gotten so far. I'm still tweaking other configs to see if they > cause > >>>>>> hanging as well. > >>>>>> > >>>>>> This just does NOT appear to be a stable OS on the ESP32. > >>>>>> > >>>>>> -m > >>>>>> > >>>>>> On 8/31/2023 9:05 AM, Tiago Medicci Serrano wrote: > >>>>>>> Hi! > >>>>>>> > >>>>>>> Good to know that! Yes, there are packages that need to be selected > >>>>>>> to > >>>>>> make > >>>>>>> it work. The `esp32-devkitc:blewifi` is a good starting point. > >>>>>>> > >>>>>>> Please note that BLE's log is enabled with the other wireless logs > >>>>>> through > >>>>>>> the menuconfig in "*Build Setup → Debug Options*". I hope this > helps > >>>>>>> debugging. > >>>>>>> > >>>>>>> Best regards, > >>>>>>> > >>>>>>> Em qua., 30 de ago. de 2023 às 18:29, Mike Moretti > >>>>>>> <nu...@mordent.com.invalid> escreveu: > >>>>>>> > >>>>>>>> Hi, > >>>>>>>> > >>>>>>>> Thanks. It wasn't until I untarred a whole new copy of nuttx+apps > >>>>>>>> and > >>>>>>>> ran tools/configure.sh with blewifi that I was able to get that > >>>>>>>> configuration to work. In my old tree, make distclean apparently > >>>>>>>> didn't > >>>>>>>> clean something, or my old tree was corrupt somehow. > >>>>>>>> > >>>>>>>> However, I still cannot get my own config to work (the one I > >>>>>>>> previously > >>>>>>>> attached). There's a lot more stuff I need enabled than what is > >>>>>>>> enabled > >>>>>>>> by default in the blewifi configuration. I guess I will just have > >>>>>>>> to > >>>>>>>> randomly keep modifying different config params until something > >>>>>>>> works. > >>>>>>>> > >>>>>>>> Thanks, > >>>>>>>> -m > >>>>>>>> > >>>>>>>> On 8/30/2023 3:32 PM, Tiago Medicci Serrano wrote: > >>>>>>>>> Hi Mike, > >>>>>>>>> > >>>>>>>>> I found no trouble using the esp32-devkitc:blewifi configuration. > >>>>>>>>> May > >>>>>>>>> I > >>>>>>>> ask > >>>>>>>>> you to double-check your bootloader/partition-table > configuration? > >>>>>>>>> (you > >>>>>>>> can > >>>>>>>>> refer to > >>>>>>>>> > >>>>>> > https://nuttx.apache.org/docs/latest/platforms/xtensa/esp32/index.html#bootloader-and-partitions > >>>>>>>>> ). > >>>>>>>>> > >>>>>>>>> If not successful yet, please do the following: > >>>>>>>>> > >>>>>>>>> Select the esp32-devkitc:nxdiag configuration and run the `nxdiag > >>>>>>>>> -all` > >>>>>>>>> from the NSH (please refer to > >>>>>>>>> > >>>>>> > https://nuttx.apache.org/docs/latest/platforms/xtensa/esp32/boards/esp32-devkitc/index.html#nxdiag > >>>>>>>> ). > >>>>>>>>> Please share your results for reevaluattion ;) > >>>>>>>>> > >>>>>>>>> Best regards, > >>>>>>>>> > >>>>>>>>> Em ter., 29 de ago. de 2023 às 18:03, Tiago Medicci Serrano < > >>>>>>>>> tiago.medi...@gmail.com> escreveu: > >>>>>>>>> > >>>>>>>>>> Hi, > >>>>>>>>>> > >>>>>>>>>> I'll take a look at it soon. Interestingly, our internal CI > tests > >>>>>>>>>> all > >>>>>>>> the > >>>>>>>>>> defconfigs, so I wouldn't expect any erroneous behavior. > >>>>>>>>>> > >>>>>>>>>> I'll check. > >>>>>>>>>> > >>>>>>>>>> Best regards, > >>>>>>>>>> > >>>>>>>>>> Em ter., 29 de ago. de 2023 às 16:38, Mike Moretti > >>>>>>>>>> <nu...@mordent.com.invalid> escreveu: > >>>>>>>>>> > >>>>>>>>>>> Hi, > >>>>>>>>>>> > >>>>>>>>>>> I'm using NuttX 12.2.1 on an esp32 wroom devkit. > >>>>>>>>>>> > >>>>>>>>>>> If I try to configure NuttX via tools/configure.sh using the > >>>>>>>>>>> esp32-devkitc:blewifi configuration, when I boot the esp32, I > get > >>>>>>>> problems > >>>>>>>>>>> with it telling me there's no bootable app. > >>>>>>>>>>> > >>>>>>>>>>> If I instead start with the esp32-devkitc:nsh configuration and > >>>>>>>>>>> add > >>>>>>>> wifi > >>>>>>>>>>> and ble to it via menuconfig, I get only a little further. It > >>>>>>>>>>> gets > >>>>>>>> past > >>>>>>>>>>> the entropy message and then I see "AB" and it hangs forever. > >>>>>>>>>>> With > >>>>>>>> all the > >>>>>>>>>>> ble options disabled and only wifi configured by itself it > >>>>>>>>>>> actually > >>>>>>>> boots > >>>>>>>>>>> into nsh after some time. (At first, I had a somewhat similar > >>>>>>>>>>> issue > >>>>>>>> with > >>>>>>>>>>> nsh when wifi only is enabled and connection info wasn't > defined > >>>>>>>>>>> in > >>>>>> the > >>>>>>>>>>> config file, where it would seem to hang and then finally show > a > >>>>>>>> prompt. > >>>>>>>>>>> It wasn't until I actually figured out about turning on > >>>>>>>>>>> CONFIG_DEBUG > >>>>>>>>>>> "ERROR" for network/wireless that it showed me a bunch of > errors > >>>>>> during > >>>>>>>>>>> boot and I knew it wasn't just hanging permanently and to just > >>>>>>>>>>> wait > >>>>>>>> for it > >>>>>>>>>>> a bit to show an nsh prompt.) > >>>>>>>>>>> > >>>>>>>>>>> However, there don't seem to be any config debug options for > >>>>>> bluetooth. > >>>>>>>>>>> I have no idea why it hangs as no messages are displayed and it > >>>>>>>>>>> never > >>>>>>>> shows > >>>>>>>>>>> a prompt even after a half an hour. I've now spent hours > messing > >>>>>> with > >>>>>>>>>>> various BLE configuration options with no luck. I'm including > my > >>>>>>>> config > >>>>>>>>>>> file in hope that someone might see something wrong with it. > >>>>>>>>>>> > >>>>>>>>>>> Thanks, > >>>>>>>>>>> -m > >>>>>>>>>>> -- > >>>>>>>>>>> Mike Moretti > >>>>>>>>>>> ♩♫♫♩♪♩ > >>>>>>>>>>> > >>>>>>>>>> -- > >>>>>>>>>> Tiago Medicci Serrano > >>>>>>>>>> > >>>>>>>>>> Embedded Software Engineer > >>>>>>>>>> MSc Electronics/Microelectronics > >>>>>>>>>> m: +55 (19) 981403886 <+55+(19)+981403886> > >>>>>>>>>> e:tiago.medi...@gmail.com > >>>>>>>>>> a: Campinas, Brazil > >>>>>>>>>> Follow me: > >>>>>>>>>> <https://www.linkedin.com/in/tiago-serrano-924458b6> > >>>>>>>>>> <https://github.com/tmedicci> > >>>>>>>>>> > >> > > -- Tiago Medicci Serrano Embedded Software Engineer MSc Electronics/Microelectronics m: +55 (19) 981403886 <+55+(19)+981403886> e: tiago.medi...@gmail.com a: Campinas, Brazil Follow me: <https://www.linkedin.com/in/tiago-serrano-924458b6> <https://github.com/tmedicci>