Hey Chintu, Thanks -- sorry to be asking all these questions, but what does "failed to run" mean?
Did you update the protocol plugins config to ref the new plugins and their FQCN (fully qualified class names?) Do you have a log file for that? Cheers, Chris ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Chris Mattmann, Ph.D. Senior Computer Scientist NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA Office: 171-266B, Mailstop: 171-246 Email: chris.a.mattm...@nasa.gov WWW: http://sunset.usc.edu/~mattmann/ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Adjunct Assistant Professor, Computer Science Department University of Southern California, Los Angeles, CA 90089 USA ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -----Original Message----- From: <Mistry>, "Chintu [SGT INC] (GSFC-586.0)" <chintu.mis...@nasa.gov> Date: Thursday, March 28, 2013 9:12 AM To: jpluser <chris.a.mattm...@jpl.nasa.gov>, "dev@oodt.apache.org" <dev@oodt.apache.org> Cc: "Ramirez, Paul M (388J)" <paul.m.rami...@jpl.nasa.gov> Subject: Re: pushPull component problem >Since we are not using OODT 0.6, it did not compile straight away. >However, I did manage to compile it with "0.5" version of >cas-protocol-api. But when I was running it, It failed to run. > >-- >Chintu Mistry >NASA Goddard Space Flight Center >Bldg L40B, Room S776 >Office: 240 684 0477 >Mobile: 770 310 1047 > > > > > > >On 3/28/13 12:04 PM, "Mattmann, Chris A" <chris.a.mattm...@jpl.nasa.gov> >wrote: > >>Hey Chintu, >> >>Thanks for identifying this! >> >>Have you tried the alternative plugins? They use a diff set of FTP >>protocol >>plugins (that unfortunately are not ALv2 licensed or Category A approved, >>so we can't ship with Apache OODT). >> >>They may do better at handling that symlink than the default version of >>commons-ftp >>we're using. >> >>Let me know. We'll investigate. >> >>Cheers, >>Chris >> >>++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >>Chris Mattmann, Ph.D. >>Senior Computer Scientist >>NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA >>Office: 171-266B, Mailstop: 171-246 >>Email: chris.a.mattm...@nasa.gov >>WWW: http://sunset.usc.edu/~mattmann/ >>++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >>Adjunct Assistant Professor, Computer Science Department >>University of Southern California, Los Angeles, CA 90089 USA >>++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >> >> >> >> >>-----Original Message----- >>From: <Mistry>, "Chintu [SGT INC] (GSFC-586.0)" <chintu.mis...@nasa.gov> >>Date: Thursday, March 28, 2013 9:02 AM >>To: jpluser <chris.a.mattm...@jpl.nasa.gov>, "dev@oodt.apache.org" >><dev@oodt.apache.org> >>Cc: "Ramirez, Paul M (388J)" <paul.m.rami...@jpl.nasa.gov> >>Subject: Re: pushPull component problem >> >>>Chris, >>> >>>I figured out the problem. Don't know the solution. >>> >>>So the problem is the symbolic links on FTP server. >>> >>>/pub/OI-daily-v2/NetCDF/2013/AVHRR is actually >>>/san1/oisst/NetCDF/2013/AVHRR >>>Where pub -> san1 >>> And OI-daily-v2 -> oisst >>> >>>So if you use "starting_path=/san1/oisst/NetCDF/2013/AVHRR" then it >>>works. >>>Otherwise it does not work. >>> >>>Another example is : ftp://aftp.cmdl.noaa.gov >>> >>>/data/radiation/surfrad/dra/2013 >>>->/data/radiation/surfrad/Desert_Rock_NV/2013 >>> >>> >>> >>>I don't know how to fix this. Well, not exactly sure where to look. It >>>appears that the filename filters are being applied based on the path >>>specified in DirStructParserFiles instead of just the filename. Because >>>I >>>can see the correct path when I print RemoteFile (path = >>>'/san1/oisst/NetCDF/2013/AVHRR/avhrr-only-v2.20130326_preliminary.nc.gz' >>>) >>>on STDOUT. >>> >>> >>>Hopefully you guys can fix this fast or let me know where to look. >>> >>>Regards >>>-- >>>Chintu Mistry >>>NASA Goddard Space Flight Center >>>Bldg L40B, Room S776 >>>Office: 240 684 0477 >>>Mobile: 770 310 1047 >>> >>> >>> >>> >>> >>> >>>On 3/28/13 10:15 AM, "Mattmann, Chris A" <chris.a.mattm...@jpl.nasa.gov> >>>wrote: >>> >>>>Hey Chintu, >>>> >>>>This totally helped, thanks. >>>> >>>>Can you take a look at the plugins here? >>>> >>>>https://cwiki.apache.org/OODT/oodt-push-pull-plugins.html >>>> >>>> >>>>Try installing those, and let me know if either of those FTP >>>>plugins works better and actually downloads the filesŠ >>>> >>>>In the meanwhile I'll look at the logs and see what I can come up >>>>with. >>>> >>>>Cheers, >>>>Chris >>>> >>>>++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >>>>Chris Mattmann, Ph.D. >>>>Senior Computer Scientist >>>>NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA >>>>Office: 171-266B, Mailstop: 171-246 >>>>Email: chris.a.mattm...@nasa.gov >>>>WWW: http://sunset.usc.edu/~mattmann/ >>>>++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >>>>Adjunct Assistant Professor, Computer Science Department >>>>University of Southern California, Los Angeles, CA 90089 USA >>>>++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >>>> >>>> >>>> >>>> >>>>-----Original Message----- >>>>From: <Mistry>, "Chintu [SGT INC] (GSFC-586.0)" >>>><chintu.mis...@nasa.gov> >>>>Date: Thursday, March 28, 2013 7:12 AM >>>>To: jpluser <chris.a.mattm...@jpl.nasa.gov>, "dev@oodt.apache.org" >>>><dev@oodt.apache.org> >>>>Cc: "Ramirez, Paul M (388J)" <paul.m.rami...@jpl.nasa.gov> >>>>Subject: Re: pushPull component problem >>>> >>>>>I have attached verbose log. I have added extra print statements and >>>>>compiled to see what is returned from remote site. Hope this helps. >>>>> >>>>> >>>>>-- >>>>>Chintu Mistry >>>>>NASA Goddard Space Flight Center >>>>>Bldg L40B, Room S776 >>>>>Office: 240 684 0477 >>>>>Mobile: 770 310 1047 >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>>From: <Mattmann>, Chris A <chris.a.mattm...@jpl.nasa.gov> >>>>>Date: Thursday, March 28, 2013 10:05 AM >>>>>To: Chintu Mistry <chintu.mis...@nasa.gov>, "dev@oodt.apache.org" >>>>><dev@oodt.apache.org> >>>>>Cc: "Ramirez, Paul M" <paul.m.rami...@jpl.nasa.gov> >>>>>Subject: Re: pushPull component problem >>>>> >>>>> >>>>> >>>>>Hey Chintu, >>>>> >>>>> >>>>>Thanks for sending this ‹ really helped verify it's something else. >>>>> >>>>> >>>>>Can you capture the log of push pull, with verbose logging turned on, >>>>>and >>>>>maybe do a pastebin? >>>>> >>>>> >>>>>Cheers, >>>>>Chris >>>>> >>>>> >>>>> >>>>> >>>>>From: <Mistry>, "Chintu [SGT INC] (GSFC-586.0)" >>>>><chintu.mis...@nasa.gov> >>>>>Date: Thursday, March 28, 2013 7:03 AM >>>>>To: jpluser <chris.a.mattm...@jpl.nasa.gov>, "dev@oodt.apache.org" >>>>><dev@oodt.apache.org> >>>>>Cc: "Ramirez, Paul M (388J)" <paul.m.rami...@jpl.nasa.gov> >>>>>Subject: Re: pushPull component problem >>>>> >>>>> >>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>Something else is wrong. I know that the regex is fine. I don't even >>>>>>have regex, it is straight up file name. It should match. >>>>>> >>>>>> >>>>>>Thanks for looking into this. >>>>>>-- >>>>>>Chintu Mistry >>>>>>NASA Goddard Space Flight Center >>>>>>Bldg L40B, Room S776 >>>>>>Office: 240 684 0477 >>>>>>Mobile: 770 310 1047 >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>From: <Mattmann>, Chris A <chris.a.mattm...@jpl.nasa.gov> >>>>>>Date: Thursday, March 28, 2013 9:01 AM >>>>>>To: Chintu Mistry <chintu.mis...@nasa.gov>, "dev@oodt.apache.org" >>>>>><dev@oodt.apache.org> >>>>>>Cc: "Ramirez, Paul M" <paul.m.rami...@jpl.nasa.gov> >>>>>>Subject: Re: pushPull component problem >>>>>> >>>>>> >>>>>> >>>>>>Hey Chintu, >>>>>> >>>>>> >>>>>>Sorry that you have been having trouble and thanks for pasting the >>>>>>relevant portions >>>>>>of push pull config to diagnose this. >>>>>> >>>>>> >>>>>>I think you have an issue in your RemoteFileSpecs file >>>>>>(TEST_AVHRR_ONLY.xml) -- >>>>>>one quick way to debug this is to use the tool that Brian Foster >>>>>>wrote: >>>>>> >>>>>> >>>>>>(in a push pull deployment dir, e.g., $PUSHPULL_HOME) >>>>>>$ cd bin >>>>>>$ java Djava.ext.dirs=../lib >>>>>>org.apache.oodt.cas.pushpull.util.ExpressionValidator >>>>>> >>>>>> >>>>>>It's a simple GUI that will allow you to put in regular expressions >>>>>>from >>>>>>your push pull >>>>>>RmoteFileSpecs files, and then put in file names from the server to >>>>>>see >>>>>>if they match. >>>>>> >>>>>> >>>>>>Can you run the above and let me know if it's matching? If not, we've >>>>>>found your issue. >>>>>>If it is matching, we'll move on to the next set of things to check. >>>>>> >>>>>> >>>>>>Thanks! >>>>>> >>>>>> >>>>>>Cheers, >>>>>>Chris >>>>>> >>>>>> >>>>>>From: <Mistry>, "Chintu [SGT INC] (GSFC-586.0)" >>>>>><chintu.mis...@nasa.gov> >>>>>>Date: Thursday, March 28, 2013 5:47 AM >>>>>>To: "dev@oodt.apache.org" <dev@oodt.apache.org> >>>>>>Cc: jpluser <chris.a.mattm...@jpl.nasa.gov>, "Ramirez, Paul M (388J)" >>>>>><paul.m.rami...@jpl.nasa.gov> >>>>>>Subject: pushPull component problem >>>>>> >>>>>> >>>>>> >>>>>>>Hi, >>>>>>> >>>>>>> >>>>>>>I have been playing around with push pull for last two days and >>>>>>>trying >>>>>>>to download some data from remote location without success. >>>>>>>I would appreciate if you guys can shed some light on what is going >>>>>>>on >>>>>>>and why isn't push pull find files to download even though its >>>>>>>clearly >>>>>>>there at remote location. >>>>>>> >>>>>>> >>>>>>>Here is my configuration. I am trying to download >>>>>>>/pub/OI-daily-v2/NetCDF/2013/AVHRR/avhrr-only-v2.20130326_preliminar >>>>>>>y >>>>>>>. >>>>>>>n >>>>>>>c >>>>>>>.gz file from eclipse.ncdc.noaa.gov. It logs-in to the server fine >>>>>>>and >>>>>>>it lists all the files as well. However for some reason it >>>>>>> does not match to the rule in TEST_AVHRR_ONLY.xml. Not sure what I >>>>>>>am >>>>>>>doing wrong. I have tried almost all combinations and still could >>>>>>>not >>>>>>>get it to work. >>>>>>> >>>>>>> >>>>>>>In my /etc/pushpull.properties file, I have types=false so that it >>>>>>>downloads the file even if its not specified in mime-types.xml file. >>>>>>>org.apache.oodt.cas.pushpull.allow.only.defined.types=false >>>>>>> >>>>>>> >>>>>>>ExternalSources.xml >>>>>>><sources> >>>>>>> <source host="eclipse.ncdc.noaa.gov"> >>>>>>> <login type="ftp" alias="eclipseClass"> >>>>>>> <username>anonymous</username> >>>>>>> <password>u...@host.com</password> >>>>>>> </login> >>>>>>> </source> >>>>>>></sources> >>>>>>> >>>>>>> >>>>>>> >>>>>>>RemoteSpecs.xml >>>>>>> <daemon alias="eclipseClass" active="yes"> >>>>>>> <runInfo firstRunDateTime="2013-03-25T00:00:00Z" >>>>>>>period="1m" runOnReboot="yes"/> >>>>>>> <propInfo >>>>>>>dir="[CAS_PP_RESOURCES]/examples/DirStructXmlParserFiles"> >>>>>>> <propFiles regExp="TEST_AVHRR_ONLY\.xml" >>>>>>>parser="org.apache.oodt.cas.pushpull.filerestrictions.parsers.DirStr >>>>>>>u >>>>>>>c >>>>>>>t >>>>>>>X >>>>>>>mlParser"/> >>>>>>> </propInfo> >>>>>>> <dataInfo stagingArea="AVHRR-ONLY" deleteFromServer="no" >>>>>>>queryElement="Filename"/> >>>>>>> </daemon> >>>>>>> >>>>>>> >>>>>>> >>>>>>>TEST_AVHRR_ONLY.xml >>>>>>><root> >>>>>>> <dirstruct starting_path="/pub/OI-daily-v2/NetCDF/2013/AVHRR"> >>>>>>> <nodirs/> >>>>>>> <!-- <file >>>>>>>name="avhrr\-only\-v2\.20130326_preliminary\.nc\.gz"/> --> >>>>>>> <file name="avhrr-only-v2.20130326_preliminary.nc.gz"/> >>>>>>> </dirstruct> >>>>>>></root> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>Regards >>>>>>>-- >>>>>>>Chintu Mistry >>>>>>>NASA Goddard Space Flight Center >>>>>>>Bldg L40B, Room S776 >>>>>>>Office: 240 684 0477 >>>>>>>Mobile: 770 310 1047 >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>> >>> >> >
