>it would be useful to find out why the JDBC driver isn't working well...
Yes, it would be. Thanks for effort. Regards, Wlada 2014/1/10 Kay Schenk <[email protected]> > 2014/1/7 Vladislav Stevanovic <[email protected]> > > > Juregen, > > Can you translate in short version what kind the problem has Kunce? I am > > interesting for MariaDB too. > > > > Thanks in advance, > > Wlada > > > > Well, I'm not Juergen, but here's what I got from Google translate (not > guaranteed for accuracy of course!) -- it would be useful to find out why > the JDBC driver isn't working well... > > =============== translation ==================== > I use Apache OpenOffice 4.0.1 ( AOO401m5 (Build : 9714 ) - Rev. 1524958 ) > with MariaDB on openSUSE 13.1 with processor AMD Athlon II X2 2.9 GHz. > (Processor, > memory, hard disk was changed with the Ugrade NOT ) > - the JDBC driver is far too slow , so that is absolutely no work possible > -so the driver aoo -my- SDBC -1.2 -0- linux_x86 - 64.oxt is used > - the MariaDB has tables with m- to-n relations > - to a form with sub - forms is used (SUB / * / SUB - forms) , which was > originally created with OOo 1.0.5 and last with OOo 3.2 (openSUSE 11.3) > without any problems was in use , the connection between the forms done > with SQL queries (now AOO 4.0.1 WRONG: openSUSE 11.3 - > CORRECT: openSUSE > 13.1) > > - with AOO I now have the following problems > 1) > Form / Writer / Database > When I click within the database in a field and there the search start then > I get an error message if the search word is only an entry after the 40th > Entry > is ( for example, the 1000th entry). When I click before the search on the > button " Go to the end " ( the database records) and then start the search > , then no error message is displayed in the search - ie the search is > successful (even when , for example, 1000 entry . ) . > > 2) > Form / Writer / Database > I have integrated check boxes. They are set to " default state " is not > selected ( "NULL "). Here it is impossible to deselect this , and to "0" > (FALSE ) to put (NOT "NULL" ) , function "NULL" and TRUE ( 1 "). A > switching of the marking field on only two values brings no improvement. > MariaDB The field corresponds to a BIT. , the "old" fields in the database > that are set to FALSE , are displayed correctly , and I change the values > to the console directly into the Datenbak , then the display is in the > form correct. too, a renewal of the marking field ( check box of AOO 4.0.1 > ) brought no improvement . > > 3) > Form / Writer / Database > when a form ( with SUB- forms) ( 75kB ) and a Calc file (. ods) are open > from 360kb and I another Calc file (. ods) of 1.1 MB open , then take the > opening 25 seconds. Here OOo 3.2 was faster. When I push in the 1.1 MB file > "Ctrl F" , then it takes 5 seconds before the search window is open . In > OOo 3.2 , this window was there immediately. > > 4) > macro > The functioning Basic query under OOo 3.2 " ResultSet.getDouble ( 1) " now > houses AOO 4.0.1 an incorrect result - it lacks the decimal places. I read > these values now with " ResultSet.getString (1 )" and convert it with " > CDbl ()" in a Double value , so my macros continue to work. > > Regards / Sincerely > > > signed Stefan > > ============================================= > > > > > > 2014/1/7 Jürgen Schmidt <[email protected]> > > > > > Hi Stefan, > > > > > > the env to reproduce this error is more complex and I am no database > > > expert. In general I recommend that you ask and describe your problem > on > > > the German user list ([email protected]) where you can > write > > > in German and people understand you. > > > > > > Die Umgebung um den Fehler zu reproduzieren ist etwas komplexer und ich > > > bin selber kein Datenbankexperte. Generell würde ich Dir empfehlen noch > > > einmal auf der deutschen User Liste nachzufragen wo deutsch > kommuniziert > > > wird und die Leute dich verstehen. > > > > > > Juergen > > > > > > > > > On 1/6/14 2:52 PM, Kunze wrote: > > > > erster Absatz überarbeitet > > > > > > > > Hallo, > > > > > > > > I have slowly time and my english is bad. Thats why I write german to > > > > this mail-address. > > > > > > > > Ich nutze Apache OpenOffice 4.0.1 (AOO401m5(Build:9714) - Rev. > > 1524958) > > > > mit MariaDB unter openSUSE 13.1 mit Prozessor AMD Athlon II X2 > 2,9GHz. > > > > (Prozessor, Speicher, Festplatte wurden mit dem Ugrade NICHT > geändert) > > > > -der JDBC-Treiber ist viel zu langsam, damit ist absolut kein > arbeiten > > > > möglich > > > > -deshalb wird der Treiber aoo-my-sdbc-1.2-0-linux_x86-64.oxt genutzt > > > > -die MariaDB hat Tabellen mit m-zu-n Beziehungen > > > > -dazu wird ein Formular mit SUB-Formularen (SUB/*/SUB-Formulare) > > > > genutzt, welches ursprünglich mit OOo-1.0.5 erstellt und zuletzt mit > > > > OOo-3.2 (openSUSE 11.3) absolut problemlos im Einsatz war, die > > > > Verbindung zwischen den Formularen erfolgt mit SQL-Abfragen (jetzt > AOO > > > > 4.0.1, FALSCH: openSUSE 11.3 -> RICHTIG: openSUSE 13.1) > > > > > > > > -mit AOO habe ich jetzt folgende Probleme > > > > 1) > > > > Formular/Writer/Datenbank > > > > Wenn ich innerhalb der Datenbank in ein Feld klicke und dort die > Suche > > > > starte dann bekomme ich eine Fehlermeldung, wenn das gesuchte Wort > erst > > > > ein Eintrag ist, der nach dem 40. Eintrag steht (z.B. beim 1000. > > > > Eintrag). Wenn ich vor der Suche auf den Button "Springe ans Ende" > > (der > > > > Datenbankeinträge) klicke und dann die Suche starte, dann erfolgt > keine > > > > Fehlermeldung bei der Suche - d. h. die Suche ist erfolgreich (auch > > beim > > > > z. B. 1000. Eintrag). > > > > > > > > 2) > > > > Formular/Writer/Datenbank > > > > Ich habe Markierfelder integriert. Sie sind eingestellt auf > > > > "Standardstatus "nicht ausgewählt ("NULL"). Hier ist es unmöglich > diese > > > > abzuwählen und auf "0" (FALSE) (NICHT "NULL") zu setzen, "NULL" und > > > > WAHR (1") funktionieren. Ein Umschaltung des Markierfeldes auf nur > zwei > > > > Werte bringt keine Besserung. Das MariaDB-Feld entspricht einem BIT. > > Die > > > > "alten" Felder der Datenbank die auf FALSE stehen, werden richtig > > > > angezeigt, und ändere ich die Werte auf der Konsole direkt in der > > > > Datenbak, dann erfolgt die Anzeige im Formular auch korrekt. Auch > eine > > > > Erneuerung des Markierfeldes (Markierfeld von AOO 4.0.1) brachte > keine > > > > Besserung. > > > > > > > > 3) > > > > Formular/Writer/Datenbank > > > > wenn ein Formular (mit SUB-Formularen) (75kB) und eine Calc-Datei > > (.ods) > > > > von 360kB geöffnet sind und ich eine weitere Calc-Datei (.ods) von > > 1,1MB > > > > öffne, dann dauert das Öffnen 25 Sekunden. Hier war OOo 3.2 > schneller. > > > > Wenn ich in der 1,1MB-Datei "Strg F" drücke, dann dauert es 5 > Sekunden, > > > > ehe sich das Suchfenster geöffnet hat. Bei OOo 3.2 war dieses Fenster > > > > sofort da. > > > > > > > > 4) > > > > Makro > > > > Die funktionierende Basic-Abfrage unter OOo 3.2 > > "ResultSet.getDouble(1)" > > > > bringt jetzt unter AOO 4.0.1 ein falsches Ergebnis - es fehlen die > > > > Nachkommastellen. Ich lese diese Werte jetzt mit > > > > "ResultSet.getString(1)" aus und wandle diesen mit "CDbl()" in einen > > > > Double-Wert, damit meine Makros weiterhin funktionieren. > > > > > > > > Regards/ Mit freundlichen Grüßen > > > > > > > > > > > > gez. Stefan > > > > > > > > --------------------------------------------------------------------- > > > > To unsubscribe, e-mail: [email protected] > > > > For additional commands, e-mail: [email protected] > > > > > > > > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: [email protected] > > > For additional commands, e-mail: [email protected] > > > > > > > > > > > > -- > > ------------------------------------------------------------------------------------------------- > MzK > > "Cats do not have to be shown how to have a good time, > for they are unfailing ingenious in that respect." > -- James Mason >
