On Tue, Sep 18, 2012 at 11:33:33PM +0200, Andi wrote: > On 09/18/2012 11:26 PM, Ben Pfaff wrote: > >On Tue, Sep 18, 2012 at 11:29:55PM +0200, Andi wrote: > >>On 09/18/2012 11:23 PM, Ben Pfaff wrote: > >>>On Tue, Sep 18, 2012 at 11:24:52PM +0200, Andi wrote: > >>>>Hi Ben, > >>>>thank you for your advices. > >>>>Please find comments inline. > >>>> > >>>>Regards > >>>>Andi > >>>>On 09/18/2012 07:07 PM, Ben Pfaff wrote: > >>>>>On Tue, Sep 18, 2012 at 06:11:56PM +0200, Andi wrote: > >>>>>>I am having some trouble in adding flow table entries with > >>>>>>openvswitch. I am using nox with some modifications on it and when I > >>>>>>submit flow mod message the switches appear to accept the packet > >>>>>>(all the methods to add the flow entry return 0), but when I use > >>>>>>ovs-dpctl dump-flows br0 it has no flows installed. > >>>>>ovs-dpctl doesn't display OpenFlow flows. You can't use it this way. > >>>>> > >>>>>ovs-ofctl displays OpenFlow flows. Use "ovs-ofctl dump-flows" to show > >>>>>the flow table. > >>>>In the dpctl help one finds > >>>>/dump-flows DP display flows in DP/ > >>>>Using this command with off-the shelf Nox it displays all flows. > >>>Is the program named dpctl or ovs-dpctl? If it's dpctl then you're > >>>not using Open vSwitch but something else. > >>ovs-dpctl sorry > >OK, then what you're saying doesn't make sense and you will have to > >provide an example. > switch2:/hosthome/OF/openvswitch/build/bin# ./ovs-ofctl dump-flows br0 > ovs-ofctl: br0 is not a bridge or a socket
OK, so what's in the rundir (typically /var/run/openvswitch)? > switch2:/hosthome/OF/openvswitch/build/bin# ./ovs-dpctl dump-flows br0 > in_port(2),eth(src=c6:10:36:4a:20:7f,dst=a6:8a:d7:63:1e:49),eth_type(0x0800),ipv4(src=192.168.20.2,dst=192.168.10.2,proto=1,tos=0,ttl=64,frag=no),icmp(type=0,code=0), > packets:10, bytes:980, used:0.089s, actions:1 Those aren't OpenFlow flows. _______________________________________________ dev mailing list [email protected] http://openvswitch.org/mailman/listinfo/dev
