Markdown was not formatted correctly and, as a result, was displaying incorrectly on github.
Signed-off-by: Mark D. Gray <mark.d.g...@intel.com> --- README-native-tunneling.md | 35 +++++++++++++++++------------------ 1 file changed, 17 insertions(+), 18 deletions(-) diff --git a/README-native-tunneling.md b/README-native-tunneling.md index 746d089..63b0209 100644 --- a/README-native-tunneling.md +++ b/README-native-tunneling.md @@ -26,24 +26,23 @@ Configure OVS bridges as follows. ovs-vsctl add-port int-br vxlan0 -- set interface vxlan0 type=vxlan options:remote_ip=172.168.1.2 4. Assign IP address to int-br, So final topology looks like: - - 192.168.1.1/24 - +--------------+ - | int-br | 192.168.1.2/24 - +--------------+ +--------------+ - | vxlan0 | | vxlan0 | - +--------------+ +--------------+ - | | - | | - | | - 172.168.1.1/24 | - +--------------+ | - | br-eth1 | 172.168.1.2/24 - +--------------+ +---------------+ - | eth1 |----------------------------------| eth1 | - +--------------+ +---------------- - - Host A with OVS. Remote host. + 192.168.1.1/24 + +--------------+ + | int-br | 192.168.1.2/24 + +--------------+ +--------------+ + | vxlan0 | | vxlan0 | + +--------------+ +--------------+ + | | + | | + | | + 172.168.1.1/24 | + +--------------+ | + | br-eth1 | 172.168.1.2/24 + +--------------+ +---------------+ + | eth1 |----------------------------------| eth1 | + +--------------+ +---------------+ + + Host A with OVS. Remote host. With this setup, ping to VXLAN target device (192.168.1.2) should work There are following commands that shows internal tables: -- 1.9.3 _______________________________________________ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev