Replace 'dpdk_nic_bind.py' references with 'dpdk-devbind.py'. The script name is changed in DPDK 16.07 as the script can be used also on crypto devices along with NICs.
Update the command for setting packet forwarding mode in 'testpmd' app from 'set fwd mac_retry' to 'set fwd mac retry'. Signed-off-by: Bhanuprakash Bodireddy <bhanuprakash.bodire...@intel.com> --- INSTALL.DPDK.md | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/INSTALL.DPDK.md b/INSTALL.DPDK.md index 253d022..c0686ce 100644 --- a/INSTALL.DPDK.md +++ b/INSTALL.DPDK.md @@ -153,8 +153,8 @@ advanced install guide [INSTALL.DPDK-ADVANCED.md] modprobe vfio-pci sudo /usr/bin/chmod a+x /dev/vfio sudo /usr/bin/chmod 0666 /dev/vfio/* - $DPDK_DIR/tools/dpdk_nic_bind.py --bind=vfio-pci eth1 - $DPDK_DIR/tools/dpdk_nic_bind.py --status + $DPDK_DIR/tools/dpdk-devbind.py --bind=vfio-pci eth1 + $DPDK_DIR/tools/dpdk-devbind.py --status ``` Note: If running kernels < 3.6 UIO drivers to be used, @@ -398,8 +398,8 @@ can be found in [Vhost Walkthrough]. mount -t hugetlbfs hugetlbfs /dev/hugepages (only if not already mounted) modprobe uio insmod $DPDK_BUILD/kmod/igb_uio.ko - $DPDK_DIR/tools/dpdk_nic_bind.py --status - $DPDK_DIR/tools/dpdk_nic_bind.py -b igb_uio 00:03.0 00:04.0 + $DPDK_DIR/tools/dpdk-devbind.py --status + $DPDK_DIR/tools/dpdk-devbind.py -b igb_uio 00:03.0 00:04.0 ``` vhost ports pci ids can be retrieved using `lspci | grep Ethernet` cmd. @@ -570,18 +570,18 @@ can be found in [Vhost Walkthrough]. ``` cd $DPDK_DIR/app/test-pmd; ./testpmd -c 0x3 -n 4 --socket-mem 1024 -- --burst=64 -i --txqflags=0xf00 --disable-hw-vlan - set fwd mac_retry + set fwd mac retry start ``` * Bind vNIC back to kernel once the test is completed. ``` - $DPDK_DIR/tools/dpdk_nic_bind.py --bind=virtio-pci 0000:00:03.0 - $DPDK_DIR/tools/dpdk_nic_bind.py --bind=virtio-pci 0000:00:04.0 + $DPDK_DIR/tools/dpdk-devbind.py --bind=virtio-pci 0000:00:03.0 + $DPDK_DIR/tools/dpdk-devbind.py --bind=virtio-pci 0000:00:04.0 ``` Note: Appropriate PCI IDs to be passed in above example. The PCI IDs can be - retrieved using '$DPDK_DIR/tools/dpdk_nic_bind.py --status' cmd. + retrieved using '$DPDK_DIR/tools/dpdk-devbind.py --status' cmd. ### 5.3 PHY-VM-PHY [IVSHMEM] -- 2.4.11 _______________________________________________ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev