Hi Rainer, first off all, the 0.7.0-SNAPSHOT version is older than the 0.7.0 … the newest would be 0..8.0-SNAPSHOT … so just as some side information.
I can confirm, that not all types are fully supported. Mainly this is due to the fact, that not all of these types are supported on my S7-1200, which I used for reverse-engineering most of the S7 protocol. Having a check the following types might be problematic: * LWORD * LINT * ULINT * REAL * LREAL * WSTRING * LTIME Also are there code collisions for: * CHAR and STRING * DATE, TIME_OF_DAY and DATE_AND_TIME We could highly appreciate some communication pcap captures of communication accessing these type of addresses to fill out some of the white sports. Chris Von: Reiner Pöschko <r.som...@sotec.eu> Antworten an: "dev@plc4x.apache.org" <dev@plc4x.apache.org> Datum: Mittwoch, 17. Juni 2020 um 12:35 An: "dev@plc4x.apache.org" <dev@plc4x.apache.org> Betreff: S7 DATA_BLOCKS and FLAGS_MARKERS error Hey Everyone, We are currently doing further tests regarding the Siemens S7 connector (S7_1200) using the scrapper, and have come into an issue. We testing different data types in DB (DATA_BLOCKS) memory area, most of them are doing fine, but adding one of the following data types create an error: - LREAL - CHAR - TIME - DATE - TIME_OF_DAY - DATE_AND_TIME As soon as we add an item of this types there is a Connection-Alias error: [cid:ii_karwzil70] We also have to read values from the S7 "MERKER" memory area. For that we use the plc4x Memory Areas FLAGS_MARKERS Code M, but independently from the used data type we also get the same error message. We are using a 0.7.0-SNAPSHOT version, I have also tested with 0.7.0. Is there something that still needs to be done? Any suggestions or comments would be appreciated. Best regards Reiner Sommer Reiner Sommer| SOTEC | r.som...@sotec.eu<mailto:r.poesc...@sotec.eu> | T +49 7033 5458-15 | F +49 7033 5458-95 www.sotec.eu<http://www.sotec.eu/> SOTEC Software Entwicklungs GmbH + Co Mikrocomputertechnik KG Calwer Straße 11, D-75395 Ostelsheim Sitz Ostelsheim, Amtsgericht Stuttgart HRA 330821/HRB 330664, Geschäftsführer: Florian Holz
