Hi, Frank, Thank you. :)
Best regards, Zhu Lihua ----- Original Message ----- From: "Frank Stecher - Sun Germany QA Engineer - ham02 - Hamburg" <[EMAIL PROTECTED]> Newsgroups: openoffice.qa.dev To: <[email protected]> Sent: Thursday, December 13, 2007 5:41 PM Subject: Re: [qa-dev] A question about print selected area > Hi Lihua, > > if you have two or more selections and like to print them, the starting > point for the printed selection is always the upper left corner of the > highest cell and the selection ends with the down right corner of the > lowest selection. In your case this results in the selection of C3:G10 > to be printed. This is by design as a selection to be printed must > contain a single rectangular cell area. > > If you want these selections to be printed on one sheet of paper each, > define a print range for C3:D5 and one for F7:G10 by Format-Print range- > Define for C3:D5 and Format-Print range-Add for F7:G10. Now two pages > should be printed if the Print command is used. > > Frank > > Zhu Lihua wrote: >> Hi,all, >> >> If we select 2 area in calc sheet, and print selected area, what happens? >> >> e.g. select C3:D5, then hold down ctrl key, select F7:G10. Now there are 2 >> blocks selected. Then we print selected area. Which result is according to >> the specification? >> >> 1. Only C3:D5 and F7:G10 area is printed; >> 2. C3:G10 is printed. >> >> I've tested in OOo2.3.1, the result is 2. Does this worked as design? In my >> mind, I think maybe it should be the 1st result. > > -- > Sun Microsystems GmbH, Frank Stecher > Quality Assurance StarOffice Calc > Nagelsweg 55 > Hamburg 20097 DE > Phone x66636 / +49 40 23 646 636 > Email [EMAIL PROTECTED] > http://www.sun.de/staroffice > > Sitz der Gesellschaft: Sun Microsystems GmbH, Sonnenallee 1, > D-85551 Kirchheim-Heimstetten > Amtsgericht Muenchen: HRB 161028 > Geschaeftsfuehrer: Thomas Schroeder, Wolfgang Engels, Dr. Roland Boemer > Vorsitzender des Aufsichtsrates: Martin Haering > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED]
