Hi, Great to hear that you got it built... :-)
+1 to creating a wiki page. Am new to this community and don't know much about Storm. But I can try to contribute to the WIKI page if possible. I was able to build storm in Linux (Ubuntu 12.10 - 64-bit) and maybe add any linux specific steps that need to be done to build storm. Thanks, Lasantha On Tue, Oct 22, 2013 at 3:01 AM, Christian Müller < [email protected]> wrote: > Ultimately, I got it working: > cmueller$ cd jzmq > cmueller$ touch src/classdist_noinst.stamp > > cmueller$ cd src > cmueller$ javac -d . org/zeromq/*.java > > cmueller$ cd .. > cmueller$ make > cmueller$ sudo make install > ... > > Change into my local storm workspace: > cmueller$ cd jzmq > cmueller$ lein sub install > Reading project from storm-console-logging > Created > > /Users/cmueller/workspaceProjectX/storm/storm-console-logging/target/storm-console-logging-0.9.0-rc3.jar > Wrote /Users/cmueller/workspaceProjectX/storm/storm-console-logging/pom.xml > Reading project from storm-core > Compiling backtype.storm.messaging.zmq > Compiling backtype.storm.metric.testing > Compiling backtype.storm.scheduler.IsolationScheduler > Compiling backtype.storm.testing4j > Compiling backtype.storm.ui.core > Compiling backtype.storm.ui.helpers > Compiling storm.trident.testing > Compiling zilch.mq > Created > > /Users/cmueller/workspaceProjectX/storm/storm-core/target/storm-core-0.9.0-rc3.jar > Wrote /Users/cmueller/workspaceProjectX/storm/storm-core/pom.xml > Reading project from storm-netty > Retrieving org/clojure/clojure/1.5.1/clojure-1.5.1.pom from central > Retrieving org/clojure/clojure/1.5.1/clojure-1.5.1.jar from central > Compiling 11 source files to > /Users/cmueller/workspaceProjectX/storm/storm-netty/target/classes > Created > > /Users/cmueller/workspaceProjectX/storm/storm-netty/target/storm-netty-0.9.0-rc3.jar > Wrote /Users/cmueller/workspaceProjectX/storm/storm-netty/pom.xml > > I will create a WIKI page soon... > > Best, > > Christian > ----------------- > > Software Integration Specialist > > Apache Member > V.P. Apache Camel | Apache Camel PMC Member | Apache Camel committer > Apache Incubator PMC Member > > https://www.linkedin.com/pub/christian-mueller/11/551/642 > > > On Fri, Oct 18, 2013 at 12:52 AM, Christian Müller < > [email protected]> wrote: > > > Thanks for taking the time Lasantha! > > > > I could install ZeroMQ without any issues. > > By installing JZMQ, I got the following error: > > > > cmueller$ git clone https://github.com/nathanmarz/jzmq.git > > > > Cloning into 'jzmq'... > > remote: Counting objects: 611, done. > > remote: Compressing objects: 100% (292/292), done. > > remote: Total 611 (delta 251), reused 533 (delta 204) > > Receiving objects: 100% (611/611), 343.13 KiB | 263.00 KiB/s, done. > > Resolving deltas: 100% (251/251), done. > > Checking connectivity... done > > > > cmueller$ cd jzmq > > > > cmueller$ ./autogen.sh > > > > autoreconf: Entering directory `.' > > autoreconf: configure.in: not using Gettext > > autoreconf: running: aclocal -I config --force -I config > > aclocal: warning: autoconf input should be named 'configure.ac', not ' > > configure.in' > > autoreconf: configure.in: tracing > > autoreconf: running: glibtoolize --copy --force > > glibtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `config'. > > glibtoolize: copying file `config/ltmain.sh' > > glibtoolize: putting macros in AC_CONFIG_MACRO_DIR, `config'. > > glibtoolize: copying file `config/libtool.m4' > > glibtoolize: copying file `config/ltoptions.m4' > > glibtoolize: copying file `config/ltsugar.m4' > > glibtoolize: copying file `config/ltversion.m4' > > glibtoolize: copying file `config/lt~obsolete.m4' > > aclocal: warning: autoconf input should be named 'configure.ac', not ' > > configure.in' > > autoreconf: running: /usr/local/Cellar/autoconf/2.69/bin/autoconf > > --include=config --force > > autoreconf: running: /usr/local/Cellar/autoconf/2.69/bin/autoheader > > --include=config --force > > autoreconf: running: automake --add-missing --copy --force-missing > > automake: warning: autoconf input should be named 'configure.ac', not ' > > configure.in' > > configure.in:28: installing 'config/compile' > > configure.in:28: installing 'config/config.guess' > > configure.in:28: installing 'config/config.sub' > > configure.in:14: installing 'config/install-sh' > > configure.in:14: installing 'config/missing' > > Makefile.am: installing './INSTALL' > > automake: warning: autoconf input should be named 'configure.ac', not ' > > configure.in' > > src/Makefile.am: installing 'config/depcomp' > > autoreconf: Leaving directory `.' > > > > cmueller$ ./configure > > > > checking for a BSD-compatible install... /usr/bin/install -c > > checking whether build environment is sane... yes > > checking for a thread-safe mkdir -p... config/install-sh -c -d > > checking for gawk... no > > checking for mawk... no > > checking for nawk... no > > checking for awk... awk > > checking whether make sets $(MAKE)... yes > > checking whether make supports nested variables... yes > > checking whether UID '501' is supported by ustar format... yes > > checking whether GID '20' is supported by ustar format... yes > > checking how to create a ustar tar archive... gnutar > > checking build system type... x86_64-apple-darwin12.5.0 > > checking host system type... x86_64-apple-darwin12.5.0 > > checking how to print strings... printf > > checking for style of include used by make... GNU > > checking for gcc... gcc > > checking whether the C compiler works... yes > > checking for C compiler default output file name... a.out > > checking for suffix of executables... > > checking whether we are cross compiling... no > > checking for suffix of object files... o > > checking whether we are using the GNU C compiler... yes > > checking whether gcc accepts -g... yes > > checking for gcc option to accept ISO C89... none needed > > checking whether gcc understands -c and -o together... yes > > checking dependency style of gcc... gcc3 > > checking for a sed that does not truncate output... /usr/bin/sed > > checking for grep that handles long lines and -e... /usr/bin/grep > > checking for egrep... /usr/bin/grep -E > > checking for fgrep... /usr/bin/grep -F > > checking for ld used by gcc... > > /usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld > > checking if the linker > > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) is GNU > ld... no > > checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm > > checking the name lister (/usr/bin/nm) interface... BSD nm > > checking whether ln -s works... yes > > checking the maximum length of command line arguments... 196608 > > checking whether the shell understands some XSI constructs... yes > > checking whether the shell understands "+="... yes > > checking how to convert x86_64-apple-darwin12.5.0 file names to > > x86_64-apple-darwin12.5.0 format... func_convert_file_noop > > checking how to convert x86_64-apple-darwin12.5.0 file names to toolchain > > format... func_convert_file_noop > > checking for /usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld > > option to reload object files... -r > > checking for objdump... no > > checking how to recognize dependent libraries... pass_all > > checking for dlltool... no > > checking how to associate runtime and link libraries... printf %s\n > > checking for ar... ar > > checking for archiver @FILE support... no > > checking for strip... strip > > checking for ranlib... ranlib > > checking command to parse /usr/bin/nm output from gcc object... ok > > checking for sysroot... no > > checking for mt... no > > checking if : is a manifest tool... no > > checking for dsymutil... dsymutil > > checking for nmedit... nmedit > > checking for lipo... lipo > > checking for otool... otool > > checking for otool64... no > > checking for -single_module linker flag... yes > > checking for -exported_symbols_list linker flag... yes > > checking for -force_load linker flag... yes > > checking how to run the C preprocessor... gcc -E > > checking for ANSI C header files... yes > > checking for sys/types.h... yes > > checking for sys/stat.h... yes > > checking for stdlib.h... yes > > checking for string.h... yes > > checking for memory.h... yes > > checking for strings.h... yes > > checking for inttypes.h... yes > > checking for stdint.h... yes > > checking for unistd.h... yes > > checking for dlfcn.h... yes > > checking for objdir... .libs > > checking if gcc supports -fno-rtti -fno-exceptions... no > > checking for gcc option to produce PIC... -fno-common -DPIC > > checking if gcc PIC flag -fno-common -DPIC works... yes > > checking if gcc static flag -static works... no > > checking if gcc supports -c -o file.o... yes > > checking if gcc supports -c -o file.o... (cached) yes > > checking whether the gcc linker > > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) supports > > shared libraries... yes > > checking dynamic linker characteristics... darwin12.5.0 dyld > > checking how to hardcode library paths into programs... immediate > > checking whether stripping libraries is possible... yes > > checking if libtool supports shared libraries... yes > > checking whether to build shared libraries... yes > > checking whether to build static libraries... yes > > checking for gawk... (cached) awk > > checking for g++... g++ > > checking whether we are using the GNU C++ compiler... yes > > checking whether g++ accepts -g... yes > > checking dependency style of g++... gcc3 > > checking how to run the C++ preprocessor... g++ -E > > checking for ld used by g++... > > /usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld > > checking if the linker > > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) is GNU > ld... no > > checking whether the g++ linker > > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) supports > > shared libraries... yes > > checking for g++ option to produce PIC... -fno-common -DPIC > > checking if g++ PIC flag -fno-common -DPIC works... yes > > checking if g++ static flag -static works... no > > checking if g++ supports -c -o file.o... yes > > checking if g++ supports -c -o file.o... (cached) yes > > checking whether the g++ linker > > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) supports > > shared libraries... yes > > checking dynamic linker characteristics... darwin12.5.0 dyld > > checking how to hardcode library paths into programs... immediate > > checking for pkg-config... /usr/local/bin/pkg-config > > checking pkg-config is at least version 0.9.0... yes > > checking for ZeroMQ... yes > > checking zmq.h usability... yes > > checking zmq.h presence... yes > > checking for zmq.h... yes > > checking for zmq_init in -lzmq... yes > > checking for javac... /usr/bin/javac > > checking for javah... /usr/bin/javah > > checking for jar... /usr/bin/jar > > checking for jni.h in > > > /Library/Java/JavaVirtualMachines/1.6.0_43-b01-447.jdk/Contents/Home/include... > > yes > > checking that generated files are newer than configure... done > > configure: creating ./config.status > > config.status: creating Makefile > > config.status: creating src/Makefile > > config.status: creating perf/Makefile > > config.status: creating src/config.hpp > > config.status: executing depfiles commands > > config.status: executing libtool commands > > > > cmueller$ make > > > > Making all in src > > make[1]: *** No rule to make target `classdist_noinst.stamp', needed by > > `org/zeromq/ZMQ.class'. Stop. > > make: *** [all-recursive] Error 1 > > > > Any idea what's wrong? > > > > Thanks in advance, > > > > Christian > > ----------------- > > > > Software Integration Specialist > > > > Apache Member > > V.P. Apache Camel | Apache Camel PMC Member | Apache Camel committer > > Apache Incubator PMC Member > > > > https://www.linkedin.com/pub/christian-mueller/11/551/642 > > > > > > On Mon, Oct 14, 2013 at 2:42 PM, Lasantha Fernando < > [email protected] > > > wrote: > > > >> Hi Christian, > >> > >> Were you able to fix this error? Did you stumble upon [1] when searching > >> for this error? It has some useful links at the bottom regarding > building > >> on Mac OS X. > >> > >> [1] > >> https://github.com/nathanmarz/storm/wiki/Installing-native-dependencies > >> > >> HTH, > >> Lasantha > >> > >> > >> On Thu, Oct 10, 2013 at 8:38 PM, Christian Müller < > >> [email protected]> wrote: > >> > >> > Hello fellow Storm developers! > >> > > >> > Congrats for this great product! > >> > > >> > I really like the idea behind this project and cannot wait diving into > >> it > >> > to contribute to this project. We plan to use this framework in an > >> > environment which has to follow the PCI security standards [1]. > Because > >> of > >> > this (and to start working/playing with the source), I plan to start > my > >> > contributions with some third party library updates. This is important > >> for > >> > us, because we are not allowed to use unsupported third party > libraries. > >> > > >> > Because I had some trouble building Storm (I still not succeed), I > would > >> > like to start my first contribution with a WIKI page about this topic. > >> > Something similar we also have for Apache Camel [2]. But first I have > to > >> > succeed with this step.. > >> > > >> > What I have done so far: > >> > I'm using brew and updated it to the latest version. > >> > cmueller$ brew --config > >> > HOMEBREW_VERSION: 0.9.5 > >> > ORIGIN: https://github.com/mxcl/homebrew > >> > HEAD: 89b2d0878c61c1cedccc134e65f0daa6c81edbba > >> > HOMEBREW_PREFIX: /usr/local > >> > HOMEBREW_CELLAR: /usr/local/Cellar > >> > CPU: 8-core 64-bit ivybridge > >> > OS X: 10.8.5-x86_64 > >> > Xcode: 5.0 > >> > CLT: 4.6.0.0.1.1362189000 > >> > LLVM-GCC: build 2336 > >> > Clang: 4.2 build 425 > >> > X11: 2.7.4 => /opt/X11 > >> > System Ruby: 1.8.7-358 > >> > Perl: /usr/bin/perl > >> > Python: /usr/bin/python > >> > Ruby: /Users/cmueller/.rvm/rubies/ruby-2.0.0-p247/bin/ruby > >> > > >> > I installed leiningen: > >> > cmueller$ brew install leiningen > >> > ==> Downloading > >> > https://github.com/technomancy/leiningen/archive/2.3.2.tar.gz > >> > Already downloaded: /Library/Caches/Homebrew/leiningen-2.3.2.tar.gz > >> > ==> Downloading > >> > > >> > https://leiningen.s3.amazonaws.com/downloads/leiningen-2.3.2-standalone.jar > >> > Already downloaded: /Library/Caches/Homebrew/leiningen--jar-2.3.2.jar > >> > ==> Caveats > >> > Dependencies will be installed to: > >> > $HOME/.m2/repository > >> > To play around with Clojure run `lein repl` or `lein help`. > >> > > >> > Bash completion has been installed to: > >> > /usr/local/etc/bash_completion.d > >> > > >> > zsh completion has been installed to: > >> > /usr/local/share/zsh/site-functions > >> > ==> Summary > >> > 🍺 /usr/local/Cellar/leiningen/2.3.2: 8 files, 13M, built in 2 > seconds > >> > > >> > I cloned the Storm Git repo: > >> > git clone https://github.com/nathanmarz/storm.git > >> > Cloning into 'storm'... > >> > remote: Counting objects: 20315, done. > >> > remote: Compressing objects: 100% (5717/5717), done. > >> > remote: Total 20315 (delta 12845), reused 19470 (delta 12136) > >> > Receiving objects: 100% (20315/20315), 4.37 MiB | 704.00 KiB/s, done. > >> > Resolving deltas: 100% (12845/12845), done. > >> > Checking connectivity... done > >> > > >> > I changed the directory and executed the install_zmq.sh script as > >> described > >> > here [3]: > >> > cmueller$ cd storm > >> > cmueller$ bash ./bin/install_zmq.sh > >> > ./bin/install_zmq.sh: line 2: JAVA_HOME: /usr/libexec/java_home: > syntax > >> > error: operand expected (error token is "/usr/libexec/java_home") > >> > --2013-10-10 16:06:18-- > http://download.zeromq.org/zeromq-2.1.7.tar.gz > >> > Resolving download.zeromq.org... 95.142.169.98 > >> > Connecting to download.zeromq.org|95.142.169.98|:80... connected. > >> > HTTP request sent, awaiting response... 200 OK > >> > Length: 1877380 (1.8M) [application/x-gzip] > >> > Saving to: ‘zeromq-2.1.7.tar.gz’ > >> > > >> > > >> > > >> > 100%[====================================================================================================================================================>] > >> > 1,877,380 643KB/s in 2.9s > >> > > >> > 2013-10-10 16:06:21 (643 KB/s) - ‘zeromq-2.1.7.tar.gz’ saved > >> > [1877380/1877380] > >> > > >> > checking for a BSD-compatible install... /usr/bin/install -c > >> > checking whether build environment is sane... yes > >> > checking for a thread-safe mkdir -p... config/install-sh -c -d > >> > checking for gawk... no > >> > checking for mawk... no > >> > checking for nawk... no > >> > checking for awk... awk > >> > checking whether make sets $(MAKE)... yes > >> > checking how to create a ustar tar archive... gnutar > >> > checking for gcc... gcc > >> > checking whether the C compiler works... yes > >> > checking for C compiler default output file name... a.out > >> > checking for suffix of executables... > >> > checking whether we are cross compiling... no > >> > checking for suffix of object files... o > >> > checking whether we are using the GNU C compiler... yes > >> > checking whether gcc accepts -g... yes > >> > checking for gcc option to accept ISO C89... none needed > >> > checking for style of include used by make... GNU > >> > checking dependency style of gcc... gcc3 > >> > checking for gcc option to accept ISO C99... -std=gnu99 > >> > checking for g++... g++ > >> > checking whether we are using the GNU C++ compiler... yes > >> > checking whether g++ accepts -g... yes > >> > checking dependency style of g++... gcc3 > >> > checking whether gcc -std=gnu99 and cc understand -c and -o > together... > >> yes > >> > checking for a sed that does not truncate output... /usr/bin/sed > >> > checking for gawk... (cached) awk > >> > checking for xmlto... no > >> > checking for asciidoc... no > >> > checking build system type... x86_64-apple-darwin12.5.0 > >> > checking host system type... x86_64-apple-darwin12.5.0 > >> > checking for a sed that does not truncate output... (cached) > >> /usr/bin/sed > >> > checking for grep that handles long lines and -e... /usr/bin/grep > >> > checking for egrep... /usr/bin/grep -E > >> > checking for fgrep... /usr/bin/grep -F > >> > checking for ld used by gcc -std=gnu99... > >> > /usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld > >> > checking if the linker > >> > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) is GNU > >> ld... > >> > no > >> > checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm > >> > checking the name lister (/usr/bin/nm) interface... BSD nm > >> > checking whether ln -s works... yes > >> > checking the maximum length of command line arguments... 196608 > >> > checking whether the shell understands some XSI constructs... yes > >> > checking whether the shell understands "+="... yes > >> > checking for > /usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld > >> > option to reload object files... -r > >> > checking for objdump... objdump > >> > checking how to recognize dependent libraries... pass_all > >> > checking for ar... ar > >> > checking for strip... strip > >> > checking for ranlib... ranlib > >> > checking command to parse /usr/bin/nm output from gcc -std=gnu99 > >> object... > >> > ok > >> > checking for dsymutil... dsymutil > >> > checking for nmedit... nmedit > >> > checking for lipo... lipo > >> > checking for otool... otool > >> > checking for otool64... no > >> > checking for -single_module linker flag... yes > >> > checking for -exported_symbols_list linker flag... yes > >> > checking how to run the C preprocessor... gcc -std=gnu99 -E > >> > checking for ANSI C header files... yes > >> > checking for sys/types.h... yes > >> > checking for sys/stat.h... yes > >> > checking for stdlib.h... yes > >> > checking for string.h... yes > >> > checking for memory.h... yes > >> > checking for strings.h... yes > >> > checking for inttypes.h... yes > >> > checking for stdint.h... yes > >> > checking for unistd.h... yes > >> > checking for dlfcn.h... yes > >> > checking whether we are using the GNU C++ compiler... (cached) yes > >> > checking whether g++ accepts -g... (cached) yes > >> > checking dependency style of g++... (cached) gcc3 > >> > checking how to run the C++ preprocessor... g++ -E > >> > checking for objdir... .libs > >> > checking if gcc -std=gnu99 supports -fno-rtti -fno-exceptions... no > >> > checking for gcc -std=gnu99 option to produce PIC... -fno-common -DPIC > >> > checking if gcc -std=gnu99 PIC flag -fno-common -DPIC works... yes > >> > checking if gcc -std=gnu99 static flag -static works... no > >> > checking if gcc -std=gnu99 supports -c -o file.o... yes > >> > checking if gcc -std=gnu99 supports -c -o file.o... (cached) yes > >> > checking whether the gcc -std=gnu99 linker > >> > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) supports > >> > shared libraries... yes > >> > checking dynamic linker characteristics... darwin12.5.0 dyld > >> > checking how to hardcode library paths into programs... immediate > >> > checking whether stripping libraries is possible... yes > >> > checking if libtool supports shared libraries... yes > >> > checking whether to build shared libraries... yes > >> > checking whether to build static libraries... yes > >> > checking for ld used by g++... > >> > /usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld > >> > checking if the linker > >> > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) is GNU > >> ld... > >> > no > >> > checking whether the g++ linker > >> > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) supports > >> > shared libraries... yes > >> > checking for g++ option to produce PIC... -fno-common -DPIC > >> > checking if g++ PIC flag -fno-common -DPIC works... yes > >> > checking if g++ static flag -static works... no > >> > checking if g++ supports -c -o file.o... yes > >> > checking if g++ supports -c -o file.o... (cached) yes > >> > checking whether the g++ linker > >> > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) supports > >> > shared libraries... yes > >> > checking dynamic linker characteristics... darwin12.5.0 dyld > >> > checking how to hardcode library paths into programs... immediate > >> > checking whether the C compiler works... yes > >> > checking whether we are using Intel C compiler... no > >> > checking whether we are using Sun Studio C compiler... no > >> > checking whether we are using clang C compiler... no > >> > checking whether we are using gcc >= 4 C compiler... yes > >> > checking whether the C++ compiler works... yes > >> > checking whether we are using Intel C++ compiler... no > >> > checking whether we are using Sun Studio C++ compiler... no > >> > checking whether we are using clang C++ compiler... no > >> > checking whether we are using gcc >= 4 C++ compiler... yes > >> > checking whether to enable debugging information... no > >> > checking whether to enable code coverage... no > >> > checking for pthread_create in -lpthread... yes > >> > checking whether C++ compiler supports -Wno-uninitialized... yes > >> > checking whether C++ compiler supports -fvisibility=hidden... yes > >> > checking whether C++ compiler supports dso visibility... yes > >> > checking for asciidoc... no > >> > checking for xmlto... no > >> > checking whether to build documentation... no > >> > checking whether to install manpages... yes > >> > checking for ANSI C header files... (cached) yes > >> > checking errno.h usability... yes > >> > checking errno.h presence... yes > >> > checking for errno.h... yes > >> > checking arpa/inet.h usability... yes > >> > checking arpa/inet.h presence... yes > >> > checking for arpa/inet.h... yes > >> > checking netinet/tcp.h usability... yes > >> > checking netinet/tcp.h presence... yes > >> > checking for netinet/tcp.h... yes > >> > checking netinet/in.h usability... yes > >> > checking netinet/in.h presence... yes > >> > checking for netinet/in.h... yes > >> > checking stddef.h usability... yes > >> > checking stddef.h presence... yes > >> > checking for stddef.h... yes > >> > checking for stdlib.h... (cached) yes > >> > checking for string.h... (cached) yes > >> > checking sys/socket.h usability... yes > >> > checking sys/socket.h presence... yes > >> > checking for sys/socket.h... yes > >> > checking sys/time.h usability... yes > >> > checking sys/time.h presence... yes > >> > checking for sys/time.h... yes > >> > checking for unistd.h... (cached) yes > >> > checking limits.h usability... yes > >> > checking limits.h presence... yes > >> > checking for limits.h... yes > >> > checking ifaddrs.h usability... yes > >> > checking ifaddrs.h presence... yes > >> > checking for ifaddrs.h... yes > >> > checking for stdbool.h that conforms to C99... yes > >> > checking for _Bool... no > >> > checking for an ANSI C-conforming const... yes > >> > checking for inline... inline > >> > checking for size_t... yes > >> > checking for ssize_t... yes > >> > checking whether time.h and sys/time.h may both be included... yes > >> > checking for uint32_t... yes > >> > checking for working volatile... yes > >> > checking how to enable additional warnings for C++ compiler... -Wall > >> > checking return type of signal handlers... void > >> > checking for perror... yes > >> > checking for gettimeofday... yes > >> > checking for memset... yes > >> > checking for socket... yes > >> > checking for getifaddrs... yes > >> > checking for freeifaddrs... yes > >> > checking alloca.h usability... yes > >> > checking alloca.h presence... yes > >> > checking for alloca.h... yes > >> > configure: creating ./config.status > >> > config.status: creating Makefile > >> > config.status: creating src/Makefile > >> > config.status: creating doc/Makefile > >> > config.status: creating perf/Makefile > >> > config.status: creating src/libzmq.pc > >> > config.status: creating builds/msvc/Makefile > >> > config.status: creating tests/Makefile > >> > config.status: creating foreign/openpgm/Makefile > >> > config.status: creating builds/redhat/zeromq.spec > >> > config.status: creating src/platform.hpp > >> > config.status: executing depfiles commands > >> > config.status: executing libtool commands > >> > Making all in src > >> > make all-am > >> > CXX libzmq_la-clock.lo > >> > CXX libzmq_la-command.lo > >> > CXX libzmq_la-ctx.lo > >> > CXX libzmq_la-connect_session.lo > >> > CXX libzmq_la-decoder.lo > >> > CXX libzmq_la-device.lo > >> > CXX libzmq_la-devpoll.lo > >> > CXX libzmq_la-dist.lo > >> > CXX libzmq_la-encoder.lo > >> > CXX libzmq_la-epoll.lo > >> > CXX libzmq_la-err.lo > >> > CXX libzmq_la-fq.lo > >> > CXX libzmq_la-io_object.lo > >> > CXX libzmq_la-io_thread.lo > >> > CXX libzmq_la-ip.lo > >> > CXX libzmq_la-kqueue.lo > >> > CXX libzmq_la-lb.lo > >> > CXX libzmq_la-mailbox.lo > >> > CXX libzmq_la-named_session.lo > >> > CXX libzmq_la-object.lo > >> > CXX libzmq_la-options.lo > >> > CXX libzmq_la-own.lo > >> > CXX libzmq_la-pair.lo > >> > CXX libzmq_la-pgm_receiver.lo > >> > CXX libzmq_la-pgm_sender.lo > >> > CXX libzmq_la-pgm_socket.lo > >> > CXX libzmq_la-pipe.lo > >> > CXX libzmq_la-poll.lo > >> > CXX libzmq_la-poller_base.lo > >> > CXX libzmq_la-pull.lo > >> > CXX libzmq_la-push.lo > >> > CXX libzmq_la-reaper.lo > >> > CXX libzmq_la-pub.lo > >> > CXX libzmq_la-rep.lo > >> > CXX libzmq_la-req.lo > >> > CXX libzmq_la-select.lo > >> > CXX libzmq_la-session.lo > >> > CXX libzmq_la-socket_base.lo > >> > CXX libzmq_la-sub.lo > >> > CXX libzmq_la-swap.lo > >> > CXX libzmq_la-tcp_connecter.lo > >> > CXX libzmq_la-tcp_listener.lo > >> > CXX libzmq_la-tcp_socket.lo > >> > CXX libzmq_la-thread.lo > >> > CXX libzmq_la-transient_session.lo > >> > CXX libzmq_la-trie.lo > >> > CXX libzmq_la-uuid.lo > >> > CXX libzmq_la-xpub.lo > >> > CXX libzmq_la-xrep.lo > >> > CXX libzmq_la-xreq.lo > >> > CXX libzmq_la-xsub.lo > >> > CXX libzmq_la-zmq.lo > >> > CXX libzmq_la-zmq_connecter.lo > >> > CXX libzmq_la-zmq_engine.lo > >> > CXX libzmq_la-zmq_init.lo > >> > CXX libzmq_la-zmq_listener.lo > >> > CXXLD libzmq.la > >> > /usr/bin/ranlib: file: .libs/libzmq.a(libzmq_la-devpoll.o) has no > >> symbols > >> > /usr/bin/ranlib: file: .libs/libzmq.a(libzmq_la-epoll.o) has no > symbols > >> > /usr/bin/ranlib: file: .libs/libzmq.a(libzmq_la-pgm_receiver.o) has no > >> > symbols > >> > /usr/bin/ranlib: file: .libs/libzmq.a(libzmq_la-pgm_sender.o) has no > >> > symbols > >> > /usr/bin/ranlib: file: .libs/libzmq.a(libzmq_la-pgm_socket.o) has no > >> > symbols > >> > ranlib: file: .libs/libzmq.a(libzmq_la-devpoll.o) has no symbols > >> > ranlib: file: .libs/libzmq.a(libzmq_la-epoll.o) has no symbols > >> > ranlib: file: .libs/libzmq.a(libzmq_la-pgm_receiver.o) has no symbols > >> > ranlib: file: .libs/libzmq.a(libzmq_la-pgm_sender.o) has no symbols > >> > ranlib: file: .libs/libzmq.a(libzmq_la-pgm_socket.o) has no symbols > >> > Making all in doc > >> > make[1]: Nothing to be done for `all'. > >> > Making all in perf > >> > CXX local_lat.o > >> > CXXLD local_lat > >> > CXX remote_lat.o > >> > CXXLD remote_lat > >> > CXX local_thr.o > >> > CXXLD local_thr > >> > CXX remote_thr.o > >> > CXXLD remote_thr > >> > CXX inproc_lat.o > >> > CXXLD inproc_lat > >> > CXX inproc_thr.o > >> > CXXLD inproc_thr > >> > Making all in tests > >> > CXX test_pair_inproc.o > >> > CXXLD test_pair_inproc > >> > CXX test_pair_tcp.o > >> > CXXLD test_pair_tcp > >> > CXX test_reqrep_inproc.o > >> > CXXLD test_reqrep_inproc > >> > CXX test_reqrep_tcp.o > >> > CXXLD test_reqrep_tcp > >> > CXX test_hwm.o > >> > CXXLD test_hwm > >> > CXX test_shutdown_stress.o > >> > CXXLD test_shutdown_stress > >> > CXX test_pair_ipc.o > >> > CXXLD test_pair_ipc > >> > CXX test_reqrep_ipc.o > >> > CXXLD test_reqrep_ipc > >> > make[1]: Nothing to be done for `all-am'. > >> > Password: > >> > Making install in src > >> > test -z "/usr/local/lib" || ../config/install-sh -c -d > "/usr/local/lib" > >> > /bin/sh ../libtool --mode=install /usr/bin/install -c > >> > libzmq.la'/usr/local/lib' > >> > libtool: install: /usr/bin/install -c .libs/libzmq.1.dylib > >> > /usr/local/lib/libzmq.1.dylib > >> > libtool: install: (cd /usr/local/lib && { ln -s -f libzmq.1.dylib > >> > libzmq.dylib || { rm -f libzmq.dylib && ln -s libzmq.1.dylib > >> libzmq.dylib; > >> > }; }) > >> > libtool: install: /usr/bin/install -c .libs/libzmq.lai /usr/local/lib/ > >> > libzmq.la > >> > libtool: install: /usr/bin/install -c .libs/libzmq.a > >> > /usr/local/lib/libzmq.a > >> > libtool: install: chmod 644 /usr/local/lib/libzmq.a > >> > libtool: install: ranlib /usr/local/lib/libzmq.a > >> > ranlib: file: /usr/local/lib/libzmq.a(libzmq_la-devpoll.o) has no > >> symbols > >> > ranlib: file: /usr/local/lib/libzmq.a(libzmq_la-epoll.o) has no > symbols > >> > ranlib: file: /usr/local/lib/libzmq.a(libzmq_la-pgm_receiver.o) has no > >> > symbols > >> > ranlib: file: /usr/local/lib/libzmq.a(libzmq_la-pgm_sender.o) has no > >> > symbols > >> > ranlib: file: /usr/local/lib/libzmq.a(libzmq_la-pgm_socket.o) has no > >> > symbols > >> > ---------------------------------------------------------------------- > >> > Libraries have been installed in: > >> > /usr/local/lib > >> > > >> > If you ever happen to want to link against installed libraries > >> > in a given directory, LIBDIR, you must either use libtool, and > >> > specify the full pathname of the library, or use the `-LLIBDIR' > >> > flag during linking and do at least one of the following: > >> > - add LIBDIR to the `DYLD_LIBRARY_PATH' environment variable > >> > during execution > >> > > >> > See any operating system documentation about shared libraries for > >> > more information, such as the ld(1) and ld.so(8) manual pages. > >> > ---------------------------------------------------------------------- > >> > test -z "/usr/local/include" || ../config/install-sh -c -d > >> > "/usr/local/include" > >> > /usr/bin/install -c -m 644 ../include/zmq.h ../include/zmq.hpp > >> > ../include/zmq_utils.h '/usr/local/include' > >> > test -z "/usr/local/lib/pkgconfig" || ../config/install-sh -c -d > >> > "/usr/local/lib/pkgconfig" > >> > /usr/bin/install -c -m 644 libzmq.pc '/usr/local/lib/pkgconfig' > >> > Making install in doc > >> > make[2]: Nothing to be done for `install-exec-am'. > >> > test -z "/usr/local/share/man/man3" || ../config/install-sh -c -d > >> > "/usr/local/share/man/man3" > >> > /usr/bin/install -c -m 644 zmq_bind.3 zmq_close.3 zmq_connect.3 > >> > zmq_device.3 zmq_init.3 zmq_msg_close.3 zmq_msg_copy.3 zmq_msg_data.3 > >> > zmq_msg_init.3 zmq_msg_init_data.3 zmq_msg_init_size.3 zmq_msg_move.3 > >> > zmq_msg_size.3 zmq_poll.3 zmq_recv.3 zmq_send.3 zmq_setsockopt.3 > >> > zmq_socket.3 zmq_strerror.3 zmq_term.3 zmq_version.3 zmq_getsockopt.3 > >> > zmq_errno.3 '/usr/local/share/man/man3' > >> > test -z "/usr/local/share/man/man7" || ../config/install-sh -c -d > >> > "/usr/local/share/man/man7" > >> > /usr/bin/install -c -m 644 zmq.7 zmq_tcp.7 zmq_pgm.7 zmq_epgm.7 > >> > zmq_inproc.7 zmq_ipc.7 zmq_cpp.7 '/usr/local/share/man/man7' > >> > Making install in perf > >> > make[2]: Nothing to be done for `install-exec-am'. > >> > make[2]: Nothing to be done for `install-data-am'. > >> > Making install in tests > >> > make[2]: Nothing to be done for `install-exec-am'. > >> > make[2]: Nothing to be done for `install-data-am'. > >> > make[2]: Nothing to be done for `install-exec-am'. > >> > make[2]: Nothing to be done for `install-data-am'. > >> > Cloning into 'jzmq'... > >> > remote: Counting objects: 611, done. > >> > remote: Compressing objects: 100% (291/291), done. > >> > remote: Total 611 (delta 246), reused 539 (delta 205) > >> > Receiving objects: 100% (611/611), 345.23 KiB | 479.00 KiB/s, done. > >> > Resolving deltas: 100% (246/246), done. > >> > Checking connectivity... done > >> > autoreconf: Entering directory `.' > >> > autoreconf: configure.in: not using Gettext > >> > autoreconf: running: aclocal -I config --force -I config > >> > aclocal: warning: autoconf input should be named 'configure.ac', not > ' > >> > configure.in' > >> > autoreconf: configure.in: tracing > >> > autoreconf: running: glibtoolize --copy --force > >> > glibtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `config'. > >> > glibtoolize: copying file `config/ltmain.sh' > >> > glibtoolize: putting macros in AC_CONFIG_MACRO_DIR, `config'. > >> > glibtoolize: copying file `config/libtool.m4' > >> > glibtoolize: copying file `config/ltoptions.m4' > >> > glibtoolize: copying file `config/ltsugar.m4' > >> > glibtoolize: copying file `config/ltversion.m4' > >> > glibtoolize: copying file `config/lt~obsolete.m4' > >> > aclocal: warning: autoconf input should be named 'configure.ac', not > ' > >> > configure.in' > >> > autoreconf: running: /usr/local/Cellar/autoconf/2.69/bin/autoconf > >> > --include=config --force > >> > autoreconf: running: /usr/local/Cellar/autoconf/2.69/bin/autoheader > >> > --include=config --force > >> > autoreconf: running: automake --add-missing --copy --force-missing > >> > automake: warning: autoconf input should be named 'configure.ac', > not ' > >> > configure.in' > >> > configure.in:28: installing 'config/compile' > >> > configure.in:28: installing 'config/config.guess' > >> > configure.in:28: installing 'config/config.sub' > >> > configure.in:14: installing 'config/install-sh' > >> > configure.in:14: installing 'config/missing' > >> > Makefile.am: installing './INSTALL' > >> > automake: warning: autoconf input should be named 'configure.ac', > not ' > >> > configure.in' > >> > src/Makefile.am: installing 'config/depcomp' > >> > autoreconf: Leaving directory `.' > >> > checking for a BSD-compatible install... /usr/bin/install -c > >> > checking whether build environment is sane... yes > >> > checking for a thread-safe mkdir -p... config/install-sh -c -d > >> > checking for gawk... no > >> > checking for mawk... no > >> > checking for nawk... no > >> > checking for awk... awk > >> > checking whether make sets $(MAKE)... yes > >> > checking whether make supports nested variables... yes > >> > checking whether UID '501' is supported by ustar format... yes > >> > checking whether GID '20' is supported by ustar format... yes > >> > checking how to create a ustar tar archive... gnutar > >> > checking build system type... x86_64-apple-darwin12.5.0 > >> > checking host system type... x86_64-apple-darwin12.5.0 > >> > checking how to print strings... printf > >> > checking for style of include used by make... GNU > >> > checking for gcc... gcc > >> > checking whether the C compiler works... yes > >> > checking for C compiler default output file name... a.out > >> > checking for suffix of executables... > >> > checking whether we are cross compiling... no > >> > checking for suffix of object files... o > >> > checking whether we are using the GNU C compiler... yes > >> > checking whether gcc accepts -g... yes > >> > checking for gcc option to accept ISO C89... none needed > >> > checking whether gcc understands -c and -o together... yes > >> > checking dependency style of gcc... gcc3 > >> > checking for a sed that does not truncate output... /usr/bin/sed > >> > checking for grep that handles long lines and -e... /usr/bin/grep > >> > checking for egrep... /usr/bin/grep -E > >> > checking for fgrep... /usr/bin/grep -F > >> > checking for ld used by gcc... > >> > /usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld > >> > checking if the linker > >> > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) is GNU > >> ld... > >> > no > >> > checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm > >> > checking the name lister (/usr/bin/nm) interface... BSD nm > >> > checking whether ln -s works... yes > >> > checking the maximum length of command line arguments... 196608 > >> > checking whether the shell understands some XSI constructs... yes > >> > checking whether the shell understands "+="... yes > >> > checking how to convert x86_64-apple-darwin12.5.0 file names to > >> > x86_64-apple-darwin12.5.0 format... func_convert_file_noop > >> > checking how to convert x86_64-apple-darwin12.5.0 file names to > >> toolchain > >> > format... func_convert_file_noop > >> > checking for > /usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld > >> > option to reload object files... -r > >> > checking for objdump... no > >> > checking how to recognize dependent libraries... pass_all > >> > checking for dlltool... no > >> > checking how to associate runtime and link libraries... printf %s\n > >> > checking for ar... ar > >> > checking for archiver @FILE support... no > >> > checking for strip... strip > >> > checking for ranlib... ranlib > >> > checking command to parse /usr/bin/nm output from gcc object... ok > >> > checking for sysroot... no > >> > checking for mt... no > >> > checking if : is a manifest tool... no > >> > checking for dsymutil... dsymutil > >> > checking for nmedit... nmedit > >> > checking for lipo... lipo > >> > checking for otool... otool > >> > checking for otool64... no > >> > checking for -single_module linker flag... yes > >> > checking for -exported_symbols_list linker flag... yes > >> > checking for -force_load linker flag... yes > >> > checking how to run the C preprocessor... gcc -E > >> > checking for ANSI C header files... yes > >> > checking for sys/types.h... yes > >> > checking for sys/stat.h... yes > >> > checking for stdlib.h... yes > >> > checking for string.h... yes > >> > checking for memory.h... yes > >> > checking for strings.h... yes > >> > checking for inttypes.h... yes > >> > checking for stdint.h... yes > >> > checking for unistd.h... yes > >> > checking for dlfcn.h... yes > >> > checking for objdir... .libs > >> > checking if gcc supports -fno-rtti -fno-exceptions... no > >> > checking for gcc option to produce PIC... -fno-common -DPIC > >> > checking if gcc PIC flag -fno-common -DPIC works... yes > >> > checking if gcc static flag -static works... no > >> > checking if gcc supports -c -o file.o... yes > >> > checking if gcc supports -c -o file.o... (cached) yes > >> > checking whether the gcc linker > >> > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) supports > >> > shared libraries... yes > >> > checking dynamic linker characteristics... darwin12.5.0 dyld > >> > checking how to hardcode library paths into programs... immediate > >> > checking whether stripping libraries is possible... yes > >> > checking if libtool supports shared libraries... yes > >> > checking whether to build shared libraries... yes > >> > checking whether to build static libraries... yes > >> > checking for gawk... (cached) awk > >> > checking for g++... g++ > >> > checking whether we are using the GNU C++ compiler... yes > >> > checking whether g++ accepts -g... yes > >> > checking dependency style of g++... gcc3 > >> > checking how to run the C++ preprocessor... g++ -E > >> > checking for ld used by g++... > >> > /usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld > >> > checking if the linker > >> > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) is GNU > >> ld... > >> > no > >> > checking whether the g++ linker > >> > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) supports > >> > shared libraries... yes > >> > checking for g++ option to produce PIC... -fno-common -DPIC > >> > checking if g++ PIC flag -fno-common -DPIC works... yes > >> > checking if g++ static flag -static works... no > >> > checking if g++ supports -c -o file.o... yes > >> > checking if g++ supports -c -o file.o... (cached) yes > >> > checking whether the g++ linker > >> > (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) supports > >> > shared libraries... yes > >> > checking dynamic linker characteristics... darwin12.5.0 dyld > >> > checking how to hardcode library paths into programs... immediate > >> > checking for pkg-config... /usr/local/bin/pkg-config > >> > checking pkg-config is at least version 0.9.0... yes > >> > checking for ZeroMQ... yes > >> > checking zmq.h usability... yes > >> > checking zmq.h presence... yes > >> > checking for zmq.h... yes > >> > checking for zmq_init in -lzmq... yes > >> > checking for javac... /usr/bin/javac > >> > checking for javah... /usr/bin/javah > >> > checking for jar... /usr/bin/jar > >> > checking for jni.h in > >> > > >> > > >> > /Library/Java/JavaVirtualMachines/1.6.0_43-b01-447.jdk/Contents/Home/include... > >> > yes > >> > checking that generated files are newer than configure... done > >> > configure: creating ./config.status > >> > config.status: creating Makefile > >> > config.status: creating src/Makefile > >> > config.status: creating perf/Makefile > >> > config.status: creating src/config.hpp > >> > config.status: executing depfiles commands > >> > config.status: executing libtool commands > >> > Making all in src > >> > make[1]: *** No rule to make target `classdist_noinst.stamp', needed > by > >> > `org/zeromq/ZMQ.class'. Stop. > >> > make: *** [all-recursive] Error 1 > >> > Making install in src > >> > make[1]: *** No rule to make target `classdist_noinst.stamp', needed > by > >> > `org/zeromq/ZMQ.class'. Stop. > >> > make: *** [install-recursive] Error 1 > >> > > >> > Althought I got the error, I tryied to follow up with the next step: > >> > cmueller$ lein sub install > >> > Reading project from storm-console-logging > >> > Created > >> > > >> > > >> > /Users/cmueller/workspaceProjectX/storm/storm-console-logging/target/storm-console-logging-0.9.0-rc3.jar > >> > Wrote > >> /Users/cmueller/workspaceProjectX/storm/storm-console-logging/pom.xml > >> > Reading project from storm-core > >> > Compiling 438 source files to > >> > /Users/cmueller/workspaceProjectX/storm/storm-core/target/classes > >> > Note: > >> > > >> > > >> > /Users/cmueller/workspaceProjectX/storm/storm-core/src/jvm/backtype/storm/coordination/CoordinatedBolt.java > >> > uses or overrides a deprecated API. > >> > Note: Recompile with -Xlint:deprecation for details. > >> > Note: Some input files use unchecked or unsafe operations. > >> > Note: Recompile with -Xlint:unchecked for details. > >> > Compiling backtype.storm.bootstrap > >> > Compiling backtype.storm.clojure > >> > Compiling backtype.storm.cluster > >> > Compiling backtype.storm.command.activate > >> > Compiling backtype.storm.command.config-value > >> > Compiling backtype.storm.command.deactivate > >> > Compiling backtype.storm.command.dev-zookeeper > >> > Compiling backtype.storm.command.kill-topology > >> > Compiling backtype.storm.command.list > >> > Compiling backtype.storm.command.rebalance > >> > Compiling backtype.storm.command.shell-submission > >> > Compiling backtype.storm.config > >> > Compiling backtype.storm.daemon.acker > >> > Compiling backtype.storm.daemon.builtin-metrics > >> > Compiling backtype.storm.daemon.common > >> > Compiling backtype.storm.daemon.drpc > >> > Compiling backtype.storm.daemon.executor > >> > Compiling backtype.storm.daemon.logviewer > >> > Compiling backtype.storm.daemon.nimbus > >> > Compiling backtype.storm.daemon.supervisor > >> > Compiling backtype.storm.daemon.task > >> > Compiling backtype.storm.daemon.worker > >> > Compiling backtype.storm.disruptor > >> > Compiling backtype.storm.event > >> > Compiling backtype.storm.LocalCluster > >> > Compiling backtype.storm.LocalDRPC > >> > Compiling backtype.storm.log > >> > Compiling backtype.storm.messaging.loader > >> > Compiling backtype.storm.messaging.local > >> > Compiling backtype.storm.messaging.zmq > >> > 6789 [main] ERROR org.apache.zookeeper.server.NIOServerCnxn - Thread > >> > Thread[main,5,main] died > >> > clojure.lang.Compiler$CompilerException: > >> java.lang.UnsatisfiedLinkError: no > >> > jzmq in java.library.path, compiling:(zmq.clj:1) > >> > at clojure.lang.Compiler$InvokeExpr.eval(Compiler.java:3387) > >> > ~[clojure-1.4.0.jar:na] > >> > at clojure.lang.Compiler.compile1(Compiler.java:7035) > >> > ~[clojure-1.4.0.jar:na] > >> > at clojure.lang.Compiler.compile1(Compiler.java:7025) > >> > ~[clojure-1.4.0.jar:na] > >> > at clojure.lang.Compiler.compile(Compiler.java:7097) > >> > ~[clojure-1.4.0.jar:na] > >> > at clojure.lang.RT.compile(RT.java:387) ~[clojure-1.4.0.jar:na] > >> > at clojure.lang.RT.load(RT.java:427) ~[clojure-1.4.0.jar:na] > >> > at clojure.lang.RT.load(RT.java:400) ~[clojure-1.4.0.jar:na] > >> > at clojure.core$load$fn__4890.invoke(core.clj:5415) > >> > ~[clojure-1.4.0.jar:na] > >> > at clojure.core$load.doInvoke(core.clj:5414) > ~[clojure-1.4.0.jar:na] > >> > at clojure.lang.RestFn.invoke(RestFn.java:408) > >> ~[clojure-1.4.0.jar:na] > >> > at clojure.core$load_one.invoke(core.clj:5227) > >> ~[clojure-1.4.0.jar:na] > >> > at clojure.core$compile$fn__4895.invoke(core.clj:5426) > >> > ~[clojure-1.4.0.jar:na] > >> > at clojure.core$compile.invoke(core.clj:5425) > >> ~[clojure-1.4.0.jar:na] > >> > at user$eval9.invoke(form-init7247229328487019774.clj:1) ~[na:na] > >> > at clojure.lang.Compiler.eval(Compiler.java:6511) > >> > ~[clojure-1.4.0.jar:na] > >> > at clojure.lang.Compiler.eval(Compiler.java:6501) > >> > ~[clojure-1.4.0.jar:na] > >> > at clojure.lang.Compiler.load(Compiler.java:6952) > >> > ~[clojure-1.4.0.jar:na] > >> > at clojure.lang.Compiler.loadFile(Compiler.java:6912) > >> > ~[clojure-1.4.0.jar:na] > >> > at clojure.main$load_script.invoke(main.clj:283) > >> > ~[clojure-1.4.0.jar:na] > >> > at clojure.main$init_opt.invoke(main.clj:288) > >> ~[clojure-1.4.0.jar:na] > >> > at clojure.main$initialize.invoke(main.clj:316) > >> ~[clojure-1.4.0.jar:na] > >> > at clojure.main$null_opt.invoke(main.clj:349) > >> ~[clojure-1.4.0.jar:na] > >> > at clojure.main$main.doInvoke(main.clj:427) > ~[clojure-1.4.0.jar:na] > >> > at clojure.lang.RestFn.invoke(RestFn.java:421) > >> ~[clojure-1.4.0.jar:na] > >> > at clojure.lang.Var.invoke(Var.java:419) ~[clojure-1.4.0.jar:na] > >> > at clojure.lang.AFn.applyToHelper(AFn.java:163) > >> ~[clojure-1.4.0.jar:na] > >> > at clojure.lang.Var.applyTo(Var.java:532) ~[clojure-1.4.0.jar:na] > >> > at clojure.main.main(main.java:37) ~[clojure-1.4.0.jar:na] > >> > Caused by: java.lang.UnsatisfiedLinkError: no jzmq in > java.library.path > >> > at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1758) > >> > ~[na:1.6.0_43] > >> > at java.lang.Runtime.loadLibrary0(Runtime.java:823) ~[na:1.6.0_43] > >> > at java.lang.System.loadLibrary(System.java:1045) ~[na:1.6.0_43] > >> > at org.zeromq.ZMQ.<clinit>(ZMQ.java:34) ~[jzmq-2.1.0.jar:na] > >> > at java.lang.Class.forName0(Native Method) ~[na:1.6.0_43] > >> > at java.lang.Class.forName(Class.java:171) ~[na:1.6.0_43] > >> > at > >> backtype.storm.messaging.zmq$loading__4784__auto__.invoke(zmq.clj:1) > >> > ~[classes/:na] > >> > at clojure.lang.AFn.applyToHelper(AFn.java:159) > >> ~[clojure-1.4.0.jar:na] > >> > at clojure.lang.AFn.applyTo(AFn.java:151) ~[clojure-1.4.0.jar:na] > >> > at clojure.lang.Compiler$InvokeExpr.eval(Compiler.java:3382) > >> > ~[clojure-1.4.0.jar:na] > >> > ... 27 common frames omitted > >> > Compilation failed: Subprocess failed > >> > > >> > Any suggestion what I can try to get this working? > >> > > >> > [1] https://www.pcisecuritystandards.org/ > >> > [2] http://camel.apache.org/building.html > >> > [3] > >> https://github.com/nathanmarz/storm/wiki/Creating-a-new-Storm-project > >> > > >> > Thanks in advance, > >> > Christian > >> > ----------------- > >> > > >> > Software Integration Specialist > >> > > >> > Apache Member > >> > V.P. Apache Camel | Apache Camel PMC Member | Apache Camel committer > >> > Apache Incubator PMC Member > >> > > >> > https://www.linkedin.com/pub/christian-mueller/11/551/642 > >> > > >> > > > > >
