Hi, I have a bit of an esoteric problem. When I configure the software iscsi intiator that is part of EDK2 platform network stack, the platform network stack with install iBFT table into the ACPI tables so that the configuration can be picked up by further boot loaders and the OS. So far so good.
Problem: When I PXE boot into iPXE using my adapter, exit back into boot manager, the iBFT has disappeared. Alternatively, if I use iPXE to then boot WDS, the software initiator in WinPE won't find the iBFT table and therefore won't hook the network drive. Observations: * When I boot into UEFI shell on disk and exit back into boot manager, the iBFT is preserved. * When I PXE boot into UEFI shell and exit, the iBFT is preserved. * When I boot into iPXE on disk and exit, the iBFT is preserved. * When I use a different adapter (Intel) to pxe boot into iBFT and exit back to boot manager, the iBFT has moved from the penultimate position to the last position in the ACPI tables. Almost as if something uninstalled the iBFT and reinstalled it. Any ideas? Cheers Tom The information contained in this message is confidential and is intended for the addressee(s) only. If you have received this message in error, please notify the sender immediately and delete the message. Unless you are an addressee (or authorized to receive for an addressee), you may not use, copy or disclose to anyone this message or any information contained in this message. The unauthorized use, disclosure, copying or alteration of this message is strictly prohibited. -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#41082): https://edk2.groups.io/g/devel/message/41082 Mute This Topic: https://groups.io/mt/31686860/21656 Group Owner: devel+ow...@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
