Hello Ray, Do you have comments on this patch?
> -----Original Message----- > From: [email protected] [mailto:[email protected]] On Behalf Of > Laszlo Ersek > Sent: Wednesday, June 05, 2019 6:15 PM > To: Ard Biesheuvel; edk2-devel-groups-io > Cc: Alex Williamson; Wu, Hao A; Wang, Jian J; Ni, Ray; Zeng, Star > Subject: Re: [edk2-devel] [PATCH for-next] MdeModulePkg/PciBusDxe: > catch unimplemented extended config space reads > > On 06/05/19 11:25, Ard Biesheuvel wrote: > > On Tue, 4 Jun 2019 at 23:44, Laszlo Ersek <[email protected]> wrote: > >> > >> When assigning a physical PCIe device to a QEMU/KVM guest, PciBusDxe > may > >> find that the extended config space is not (fully) implemented. In > >> LocatePciExpressCapabilityRegBlock(), "CapabilityEntry" may be read as > >> 0xFFFF_FFFF at a given config space offset, after which the loop gets > >> stuck spinning on offset 0xFFC (the read at offset 0xFFC returns > >> 0xFFFF_FFFF most likely as well). > >> > >> Another scenario (not related to virtualization) for triggering the above > >> is when a Conventional PCI bus -- exposed by a PCIe-to-PCI bridge in the > >> topology -- intervenes between a PCI Express Root Port and a PCI Express > >> Endpoint. The Conventional PCI bus limits the accessible config space of > >> the PCI Express Endpoint, even though the endpoint advertizes the PCI > >> Express capability. Here's a diagram, courtesy of Alex Williamson: > >> > >> [PCIe Root Port]--[PCIe-to-PCI]--[PCI-to-PCIe]--[PCIe EP] > >> ->| |<- Conventional PCI bus > >> > >> Catch reads of 0xFFFF_FFFF in LocatePciExpressCapabilityRegBlock(), and > >> break out of the scan with a warning message. The function will return > >> EFI_NOT_FOUND. > >> > >> Cc: Alex Williamson <[email protected]> > >> Cc: Hao A Wu <[email protected]> > >> Cc: Jian J Wang <[email protected]> > >> Cc: Ray Ni <[email protected]> > >> Cc: Star Zeng <[email protected]> > >> Signed-off-by: Laszlo Ersek <[email protected]> > >> --- > >> > >> Notes: > >> Repo: https://github.com/lersek/edk2.git > >> Branch: pcibus_no_ext_conf > >> > >> MdeModulePkg/Bus/Pci/PciBusDxe/PciCommand.c | 13 > +++++++++++++ > >> 1 file changed, 13 insertions(+) > >> > >> diff --git a/MdeModulePkg/Bus/Pci/PciBusDxe/PciCommand.c > b/MdeModulePkg/Bus/Pci/PciBusDxe/PciCommand.c > >> index 214aeecdd40a..6283d602207c 100644 > >> --- a/MdeModulePkg/Bus/Pci/PciBusDxe/PciCommand.c > >> +++ b/MdeModulePkg/Bus/Pci/PciBusDxe/PciCommand.c > >> @@ -236,6 +236,19 @@ LocatePciExpressCapabilityRegBlock ( > >> break; > >> } > >> > >> + if (CapabilityEntry == MAX_UINT32) { > > > > Should we check here that the offset > 0x100 ? Otherwise, this affects > > more than just the extended config space. > > A separate function exists for locating caps in the conventional config > space (LocateCapabilityRegBlock()). > > Whereas the function being patched -- > LocatePciExpressCapabilityRegBlock() -- is supposed to start with a > capability offset into the extended config space, passed in by the > caller via *Offset, or else at 0x100 if *Offset is 0. > > And, my understanding is that an extended cap shall never chain to a > conventional cap. The spec says, > > Next Capability Offset – This field contains the offset to the next > PCI Express Capability structure or 000h if no other items exist in > the linked list of Capabilities. > > For Extended Capabilities implemented in Configuration Space, this > offset is relative to the beginning of PCI compatible Configuration > Space and thus must always be either 000h (for terminating list of > Capabilities) or greater than 0FFh. > > The bottom 2 bits of this offset are Reserved and must be > implemented as 00b although software must mask them to allow for > future uses of these bits. > > Additionally, the capability header is different for conventional > capabilities: EFI_PCI_CAPABILITY_HDR -- 2 bytes -- vs. > PCI_EXPRESS_EXTENDED_CAPABILITIES_HEADER -- 4 bytes. So if this loop > ever crossed over into normal config space, it would break horribly, > regardless of this patch. > > A more general question would be how much we should armor such > functions > -- i.e., capability list scanning -- with sanity checks. > > My answer to that was authoring PciCapLib, which detects loops in cap > lists, oversized capability reads/writes, an absent extended config > space in spite of a present express capability; maybe more. Basically > everything I could think of and/or had encountered by then. > > You probably remember that I originally attempted to get PciCapLib and > its accessories into MdePkg, with an intent to rebase core PCI drivers > to them -- including PciBusDxe. (The original "sales pitch" can be found > at > <http://mid.mail-archive.com/20180504213637.11266-1- > [email protected]>.) > I hadn't received either positive or negative feedback regarding that > idea for a month or so, after which we merged the library into OvmfPkg, > in the end. (And it is now used by ArmVirtQemu* and OVMF only, as part > of OvmfPkg/PciHotPlugInitDxe and OvmfPkg/Virtio10Dxe). > > I did file a longer-term reminder BZ at > <https://bugzilla.tianocore.org/show_bug.cgi?id=957>. But, I gave up on > that as well in about 4 months. > > The upshot is that now I can only contribute piecemeal fixes for > PciBusDxe, whenever I come across something. This particular issue has > bitten us at RH twice by now -- unfortunately, both RHBZs are private, > hence I didn't reference them in the commit message. (It's super > annoying if you click a BZ link, just to be rejected access.) > > In summary, adding a standalone check for "next" cap offsets that fall > into the forbidden range [1, 255] (inclusive) would be worthwhile, in > theory. (In fact PciCapLib happens to contain a check for that too.) But > that's a different patch, and we haven't run into that situation yet, in > practice. So I'd think it's out of scope specifically for PciBusDxe, at > this point. (Key phrase being "piecemeal fixes".) > > Thanks, > Laszlo > > > > >> + DEBUG (( > >> + DEBUG_WARN, > >> + "%a: [%02x|%02x|%02x] failed to access config space at offset > 0x%x\n", > >> + __FUNCTION__, > >> + PciIoDevice->BusNumber, > >> + PciIoDevice->DeviceNumber, > >> + PciIoDevice->FunctionNumber, > >> + CapabilityPtr > >> + )); > >> + break; > >> + } > >> + Acked-by: Hao A Wu <[email protected]> Best Regards, Hao Wu > >> CapabilityID = (UINT16) CapabilityEntry; > >> > >> if (CapabilityID == CapId) { > >> -- > >> 2.19.1.3.g30247aa5d201 > >> > >> > >> ------------ > >> Groups.io Links: You receive all messages sent to this group. > >> > >> View/Reply Online (#41893): > https://edk2.groups.io/g/devel/message/41893 > >> Mute This Topic: https://groups.io/mt/31931246/1761188 > >> Group Owner: [email protected] > >> Unsubscribe: https://edk2.groups.io/g/devel/unsub > [[email protected]] > >> ------------ > >> > > > -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#42065): https://edk2.groups.io/g/devel/message/42065 Mute This Topic: https://groups.io/mt/31931246/21656 Group Owner: [email protected] Unsubscribe: https://edk2.groups.io/g/devel/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
