Hi,
On 5/9/20 3:26 AM, Guomin Jiang wrote:
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2694
When the USB fail and then Reset Device, it should rebuild description.
I pulled the latest edk2 a few hours ago and I'm still seeing the assert
TrsRing != 0 messages on a real XHCI controller with the jmicron JBOD I
mentioned earlier.
Is there a newer version of this patch?
Thanks,
Signed-off-by: Guomin Jiang <guomin.ji...@intel.com>
Cc: Jian J Wang <jian.j.w...@intel.com>
Cc: Hao A Wu <hao.a...@intel.com>
Cc: Ray Ni <ray...@intel.com>
---
MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBus.c | 7 ++
MdeModulePkg/Bus/Usb/UsbBusDxe/UsbDesc.c | 152 +++++++++++++++++++++++
MdeModulePkg/Bus/Usb/UsbBusDxe/UsbDesc.h | 14 +++
3 files changed, 173 insertions(+)
diff --git a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBus.c
b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBus.c
index 4b4915c019ad..7bb9373a6adf 100644
--- a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBus.c
+++ b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBus.c
@@ -874,6 +874,13 @@ UsbIoPortReset (
// is in CONFIGURED state.
//
if (Dev->ActiveConfig != NULL) {
+ Status = UsbRebuildDescTable (Dev);
+
+ if (EFI_ERROR (Status)) {
+ DEBUG (( DEBUG_ERROR, "UsbIoPortReset: failed to rebuild desc table -
%r\n", Status));
+ goto ON_EXIT;
+ }
+
Status = UsbSetConfig (Dev, Dev->ActiveConfig->Desc.ConfigurationValue);
if (EFI_ERROR (Status)) {
diff --git a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbDesc.c
b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbDesc.c
index b08188b1bc78..d8e5e50b7c5a 100644
--- a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbDesc.c
+++ b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbDesc.c
@@ -900,6 +900,158 @@ UsbBuildDescTable (
return EFI_SUCCESS;
}
+/**
+ Copy the interface descriptor
+
+ @param[out] DescBuf The buffer of raw descriptor.
+ @param[in] SrcBuf The buffer of raw descriptor
+**/
+VOID
+UsbCopyInterfaceDesc (
+ OUT USB_INTERFACE_DESC *DescBuf,
+ IN USB_INTERFACE_DESC *SrcBuf
+ )
+{
+ UINTN Index, IndexI;
+
+ ASSERT ((DescBuf != NULL) && (SrcBuf != NULL));
+
+ if (DescBuf->NumOfSetting == SrcBuf->NumOfSetting) {
+ DescBuf->ActiveIndex = SrcBuf->ActiveIndex;
+
+ for (Index = 0; Index < DescBuf->NumOfSetting; Index++) {
+ CopyMem (&DescBuf->Settings[Index]->Desc,
+ &SrcBuf->Settings[Index]->Desc,
+ sizeof(EFI_USB_INTERFACE_DESCRIPTOR));
+
+ if (DescBuf->Settings[Index]->Desc.NumEndpoints ==
+ SrcBuf->Settings[Index]->Desc.NumEndpoints) {
+
+ for (IndexI = 0; IndexI < DescBuf->Settings[Index]->Desc.NumEndpoints;
+ IndexI++) {
+ CopyMem (DescBuf->Settings[Index]->Endpoints[IndexI],
+ SrcBuf->Settings[Index]->Endpoints[IndexI],
+ sizeof(USB_ENDPOINT_DESC));
+ }
+ }
+ }
+ }
+}
+
+/**
+ Copy the configuration descriptor and its interfaces.
+
+ @param[out] DescBuf The buffer of raw descriptor.
+ @param[in] SrcBuf The buffer of raw descriptor
+**/
+VOID
+UsbCopyConfigDesc (
+ OUT USB_CONFIG_DESC *DescBuf,
+ IN USB_CONFIG_DESC *SrcBuf
+ )
+{
+ UINTN Index;
+
+ ASSERT ((DescBuf != NULL) && (SrcBuf != NULL));
+
+ if (DescBuf->Desc.NumInterfaces == SrcBuf->Desc.NumInterfaces) {
+ CopyMem (&DescBuf->Desc, &SrcBuf->Desc, sizeof(EFI_USB_CONFIG_DESCRIPTOR));
+
+ for (Index = 0; Index < DescBuf->Desc.NumInterfaces; Index++) {
+ UsbCopyInterfaceDesc (DescBuf->Interfaces[Index],
SrcBuf->Interfaces[Index]);
+ }
+ }
+}
+
+/**
+ Rebuild the whole array of descriptors.
+
+ @param[in] UsbDev The Usb device.
+
+ @retval EFI_SUCCESS The descriptor table is build.
+ @retval EFI_DEVICE_ERROR Invalid config
+ @retval Others Command error when get descriptor.
+**/
+EFI_STATUS
+UsbRebuildDescTable (
+ IN USB_DEVICE *UsbDev
+ )
+{
+ EFI_USB_CONFIG_DESCRIPTOR *Config;
+ USB_CONFIG_DESC *ConfigDesc;
+ UINT8 NumConfig;
+ EFI_STATUS Status;
+ UINT8 Index;
+
+ //
+ // Override the device descriptor, Current device fail but the original
+ // descriptor pointer array is still exist.
+ //
+ Status = UsbCtrlGetDesc (
+ UsbDev,
+ USB_DESC_TYPE_DEVICE,
+ 0,
+ 0,
+ UsbDev->DevDesc,
+ sizeof (EFI_USB_DEVICE_DESCRIPTOR)
+ );
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "UsbRebuildDescTable: failed to override device descriptor
- %r\n", Status));
+ return Status;
+ }
+
+ NumConfig = UsbDev->DevDesc->Desc.NumConfigurations;
+ if (NumConfig == 0) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ DEBUG ((DEBUG_INFO, "UsbReuildDescTable: device has %d configures\n",
NumConfig));
+
+ //
+ // Read each configurations, then parse them
+ //
+ for (Index = 0; Index < NumConfig; Index++) {
+ Config = UsbGetOneConfig (UsbDev, Index);
+
+ if (Config == NULL) {
+ DEBUG ((DEBUG_INFO, "UsbRebuildDescTable: failed to get configure (index
%d)\n", Index));
+
+ //
+ // If we can get the default descriptor, it is likely that the
+ // device is still operational.
+ //
+ if (Index == 0) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ break;
+ }
+
+ ConfigDesc = UsbParseConfigDesc ((UINT8 *) Config, Config->TotalLength);
+
+ FreePool (Config);
+
+ if (ConfigDesc == NULL) {
+ DEBUG ((DEBUG_ERROR, "UsbRebuildDescTable: failed to parse configure (index
%d)\n", Index));
+
+ //
+ // If we can get the default descriptor, it is likely that the
+ // device is still operational.
+ //
+ if (Index == 0) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ break;
+ } else {
+ UsbCopyConfigDesc (UsbDev->DevDesc->Configs[Index], ConfigDesc);
+ UsbFreeConfigDesc (ConfigDesc);
+ }
+ }
+
+ return EFI_SUCCESS;
+}
/**
Set the device's address.
diff --git a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbDesc.h
b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbDesc.h
index 7b0c77fdc79c..54367133241a 100644
--- a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbDesc.h
+++ b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbDesc.h
@@ -169,6 +169,20 @@ UsbBuildDescTable (
IN USB_DEVICE *UsbDev
);
+/**
+ Rebuild the whole array of descriptors.
+
+ @param[in] UsbDev The Usb device.
+
+ @retval EFI_SUCCESS The descriptor table is build.
+ @retval EFI_DEVICE_ERROR Invalid config
+ @retval Others Command error when get descriptor.
+**/
+EFI_STATUS
+UsbRebuildDescTable (
+ IN USB_DEVICE *UsbDev
+ );
+
/**
Set the device's address.
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#62569): https://edk2.groups.io/g/devel/message/62569
Mute This Topic: https://groups.io/mt/74091912/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
