Ilias: If you check other Variable module INF file, you can find they all use [Pcd] section. Module provides the flexibility instead of the limitation. In fact, variable module code has no fixed pcd usage. Platform can decide which PCD type should be used. In future, if other PCD is required to be configured as patchable in module, you don't need to modify variable INF again.
Thanks Liming > -----邮件原件----- > 发件人: Ilias Apalodimas <[email protected]> > 发送时间: 2021年2月18日 17:17 > 收件人: [email protected]; [email protected] > 抄送: [email protected]; 'Sami Mujawar' <[email protected]>; > 'Ard Biesheuvel' <[email protected]> > 主题: Re: 回复: [edk2-devel] [PATCH v4 13/14] > MdeModulePkg/VariableStandaloneMm: Set PcdFlashNvStorageVariableBase > to Pcd > > On Thu, Feb 18, 2021 at 11:13:21AM +0800, gaoliming wrote: > > I suggest to directly change [FixedPcd] to [Pcd] section. All Pcds can > > support FixedAtBuild and PatchableInModule. > > We can, but is there a reason to do that? > Wouldn't we be better of being more strict on the Pcd context we define for > each variable? > > The values that were swapped from FixedPcd to Pcd are expected to change > in > runtime, while the rest don't. > > Thanks > /Ilias > > > > > With this change, Reviewed-by: Liming Gao <[email protected]> > > > > Thanks > > Liming > > > -----邮件原件----- > > > 发件人: [email protected] > > > <[email protected]> 代表 Sughosh > Ganu > > > 发送时间: 2021年2月17日 19:27 > > > 收件人: [email protected] > > > 抄送: Sami Mujawar <[email protected]>; Ilias Apalodimas > > > <[email protected]>; Ard Biesheuvel > <[email protected]> > > > 主题: [edk2-devel] [PATCH v4 13/14] > MdeModulePkg/VariableStandaloneMm: > > > Set PcdFlashNvStorageVariableBase to Pcd > > > > > > From: Ilias Apalodimas <[email protected]> > > > > > > Instead of running StMM in SPM, OP-TEE creates a new secure partition, > > > which emulates SPM and isolates StMM from the rest of the Trusted > > > Applications (TAs). We can then compile StMM as an FD image and run it > > > in OP-TEE. With the addition of a new RPMB driver, we can leverage > OP-TEE > > > and store variables to an RPMB device. > > > > > > Since EDK2 upper layers expect byte addressable code, for the RPMB to > > > work, we need to allocate memory and sync it with the hardware on > > > read/writes. Since DynamicPCDs are not supported in that context we > > > can only use PatchablePCDs. So let's switch them to Pcd instead of > > > FixedPcd and accomodate the new driver. > > > > > > Signed-off-by: Ilias Apalodimas <[email protected]> > > > Reviewed-by: Sami Mujawar <[email protected]> > > > --- > > > > > > Changes since V3: None > > > > > > > MdeModulePkg/Universal/Variable/RuntimeDxe/VariableStandaloneMm.inf > > > | 6 ++++-- > > > 1 file changed, 4 insertions(+), 2 deletions(-) > > > > > > diff --git > > > > a/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableStandaloneMm.in > > > f > > > > b/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableStandaloneMm.in > > > f > > > index fada0bf3c5..2a25fbdada 100644 > > > --- > > > > a/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableStandaloneMm.in > > > f > > > +++ > > > > b/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableStandaloneMm.in > > > f > > > @@ -119,10 +119,12 @@ > > > ## SOMETIMES_PRODUCES ## Variable:L"VarErrorFlag" > > > gEdkiiVarErrorFlagGuid > > > > > > -[FixedPcd] > > > - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize > > > ## CONSUMES > > > +[Pcd] > > > gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase > > > ## SOMETIMES_CONSUMES > > > > gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64 > > > ## CONSUMES > > > + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize > > > ## CONSUMES > > > + > > > +[FixedPcd] > > > gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize > > > ## CONSUMES > > > gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize > > > ## CONSUMES > > > gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVolatileVariableSize > > > ## CONSUMES > > > -- > > > 2.17.1 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#71795): https://edk2.groups.io/g/devel/message/71795 Mute This Topic: https://groups.io/mt/80745940/21656 Group Owner: [email protected] Unsubscribe: https://edk2.groups.io/g/devel/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
