Remove the configuration and image headers from the flash image.
This was likely intended for the UEFI firmware to be loaded by the ROM
code, but the BeagleBoard only has 64KB SRAM and so EDK2 needs to be
executed as a second stage loader.
Signed-off-by: Rebecca Cran <rebe...@bsdio.com>
---
Platform/BeagleBoard/BeagleBoardPkg/BeagleBoardPkg.fdf | 13 ++-----------
1 file changed, 2 insertions(+), 11 deletions(-)
diff --git a/Platform/BeagleBoard/BeagleBoardPkg/BeagleBoardPkg.fdf
b/Platform/BeagleBoard/BeagleBoardPkg/BeagleBoardPkg.fdf
index a2cfeb3bc27b..dbae015ff382 100644
--- a/Platform/BeagleBoard/BeagleBoardPkg/BeagleBoardPkg.fdf
+++ b/Platform/BeagleBoard/BeagleBoardPkg/BeagleBoardPkg.fdf
@@ -23,7 +23,7 @@
[FD.BeagleBoard_EFI]
-BaseAddress = 0x80007DF8|gArmTokenSpaceGuid.PcdFdBaseAddress #The base
address of the FLASH Device.
+BaseAddress = 0x80008000|gArmTokenSpaceGuid.PcdFdBaseAddress #The base
address of the FLASH Device.
Size = 0x000B0000|gArmTokenSpaceGuid.PcdFdSize #The size in
bytes of the FLASH Device
ErasePolarity = 1
BlockSize = 0x1
@@ -44,16 +44,7 @@ NumBlocks = 0xB0000
# RegionType <FV, DATA, or FILE>
#
################################################################################
-0x00000000|0x00000200
-FILE = Platform/BeagleBoard/BeagleBoardPkg/ConfigurationHeader.bin
-
-0x00000200|0x00000008
-DATA = {
- 0xF8, 0xFD, 0x0A, 0x00, # image size: 0xB0000 - 0x208 == 0xAFDF8
- 0x00, 0x80, 0x00, 0x80 # entry point: 0x80008000
-}
-
-0x00000208|0x000AFDF8
+0x00000000|0x000B0000
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
FV = FVMAIN_COMPACT
--
2.31.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#81227): https://edk2.groups.io/g/devel/message/81227
Mute This Topic: https://groups.io/mt/85933036/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
