It appears that the locking for many of the mailbox commands is incorrect. All UEFI firmware calls to the RPi mailbox share a single mDmaBuffer. That buffer is used to fill out the command passed to the vc firmware, and record its response. The buffer is protected by mMailboxLock, yet in many cases the mailbox response is copied from the buffer after the lock has been released. This doesn't currently appear to be causing any problems, but should be fixed anyway.
There are a couple other minor tweaks in this patch that are hard to justify on their own, one is a bit of whitespace cleanup, and the other is the addition of a debug message to print the returned clock rate for the requested clock. This latter print would have immediatly shown that the vc firmware was returning 0 as the emmc clock rate rather than something reasonable. Signed-off-by: Jeremy Linton <jeremy.lin...@arm.com> Reviewed-by: Andrei Warkentin <awarken...@vmware.com> --- .../Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c | 102 ++++++++++++--------- 1 file changed, 59 insertions(+), 43 deletions(-) diff --git a/Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c b/Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c index bf74148bbb..d38ffbc7d3 100644 --- a/Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c +++ b/Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c @@ -203,7 +203,6 @@ RpiFirmwareSetPowerState ( Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_MBOX_VC_CHANNEL, &Result); - ReleaseSpinLock (&mMailboxLock); if (EFI_ERROR (Status) || Cmd->BufferHead.Response != RPI_MBOX_RESP_SUCCESS) { @@ -219,6 +218,7 @@ RpiFirmwareSetPowerState ( __FUNCTION__, PowerState ? "en" : "dis", DeviceId)); Status = EFI_DEVICE_ERROR; } + ReleaseSpinLock (&mMailboxLock); return Status; } @@ -266,18 +266,20 @@ RpiFirmwareGetArmMemory ( Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_MBOX_VC_CHANNEL, &Result); - ReleaseSpinLock (&mMailboxLock); if (EFI_ERROR (Status) || Cmd->BufferHead.Response != RPI_MBOX_RESP_SUCCESS) { DEBUG ((DEBUG_ERROR, "%a: mailbox transaction error: Status == %r, Response == 0x%x\n", __FUNCTION__, Status, Cmd->BufferHead.Response)); + ReleaseSpinLock (&mMailboxLock); return EFI_DEVICE_ERROR; } *Base = Cmd->TagBody.Base; *Size = Cmd->TagBody.Size; + ReleaseSpinLock (&mMailboxLock); + return EFI_SUCCESS; } @@ -323,17 +325,18 @@ RpiFirmwareGetMacAddress ( Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_MBOX_VC_CHANNEL, &Result); - ReleaseSpinLock (&mMailboxLock); - if (EFI_ERROR (Status) || Cmd->BufferHead.Response != RPI_MBOX_RESP_SUCCESS) { DEBUG ((DEBUG_ERROR, "%a: mailbox transaction error: Status == %r, Response == 0x%x\n", __FUNCTION__, Status, Cmd->BufferHead.Response)); + ReleaseSpinLock (&mMailboxLock); return EFI_DEVICE_ERROR; } CopyMem (MacAddress, Cmd->TagBody.MacAddress, sizeof (Cmd->TagBody.MacAddress)); + ReleaseSpinLock (&mMailboxLock); + return EFI_SUCCESS; } @@ -378,17 +381,17 @@ RpiFirmwareGetSerial ( Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_MBOX_VC_CHANNEL, &Result); - ReleaseSpinLock (&mMailboxLock); - if (EFI_ERROR (Status) || Cmd->BufferHead.Response != RPI_MBOX_RESP_SUCCESS) { DEBUG ((DEBUG_ERROR, "%a: mailbox transaction error: Status == %r, Response == 0x%x\n", __FUNCTION__, Status, Cmd->BufferHead.Response)); + ReleaseSpinLock (&mMailboxLock); return EFI_DEVICE_ERROR; } *Serial = Cmd->TagBody.Serial; + ReleaseSpinLock (&mMailboxLock); // Some platforms return 0 or 0x0000000010000000 for serial. // For those, try to use the MAC address. if ((*Serial == 0) || ((*Serial & 0xFFFFFFFF0FFFFFFFULL) == 0)) { @@ -441,17 +444,18 @@ RpiFirmwareGetModel ( Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_MBOX_VC_CHANNEL, &Result); - ReleaseSpinLock (&mMailboxLock); - if (EFI_ERROR (Status) || Cmd->BufferHead.Response != RPI_MBOX_RESP_SUCCESS) { DEBUG ((DEBUG_ERROR, "%a: mailbox transaction error: Status == %r, Response == 0x%x\n", __FUNCTION__, Status, Cmd->BufferHead.Response)); + ReleaseSpinLock (&mMailboxLock); return EFI_DEVICE_ERROR; } *Model = Cmd->TagBody.Model; + ReleaseSpinLock (&mMailboxLock); + return EFI_SUCCESS; } @@ -496,17 +500,18 @@ RpiFirmwareGetModelRevision ( Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_MBOX_VC_CHANNEL, &Result); - ReleaseSpinLock (&mMailboxLock); - if (EFI_ERROR (Status) || Cmd->BufferHead.Response != RPI_MBOX_RESP_SUCCESS) { DEBUG ((DEBUG_ERROR, "%a: mailbox transaction error: Status == %r, Response == 0x%x\n", __FUNCTION__, Status, Cmd->BufferHead.Response)); + ReleaseSpinLock (&mMailboxLock); return EFI_DEVICE_ERROR; } *Revision = Cmd->TagBody.Revision; + ReleaseSpinLock (&mMailboxLock); + return EFI_SUCCESS; } @@ -538,17 +543,18 @@ RpiFirmwareGetFirmwareRevision ( Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_MBOX_VC_CHANNEL, &Result); - ReleaseSpinLock (&mMailboxLock); - if (EFI_ERROR (Status) || Cmd->BufferHead.Response != RPI_MBOX_RESP_SUCCESS) { DEBUG ((DEBUG_ERROR, "%a: mailbox transaction error: Status == %r, Response == 0x%x\n", __FUNCTION__, Status, Cmd->BufferHead.Response)); + ReleaseSpinLock (&mMailboxLock); return EFI_DEVICE_ERROR; } *Revision = Cmd->TagBody.Revision; + ReleaseSpinLock (&mMailboxLock); + return EFI_SUCCESS; } @@ -831,18 +837,19 @@ RpiFirmwareGetFbSize ( Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_MBOX_VC_CHANNEL, &Result); - ReleaseSpinLock (&mMailboxLock); - if (EFI_ERROR (Status) || Cmd->BufferHead.Response != RPI_MBOX_RESP_SUCCESS) { DEBUG ((DEBUG_ERROR, "%a: mailbox transaction error: Status == %r, Response == 0x%x\n", __FUNCTION__, Status, Cmd->BufferHead.Response)); + ReleaseSpinLock (&mMailboxLock); return EFI_DEVICE_ERROR; } *Width = Cmd->TagBody.Width; *Height = Cmd->TagBody.Height; + ReleaseSpinLock (&mMailboxLock); + return EFI_SUCCESS; } @@ -872,16 +879,18 @@ RpiFirmwareFreeFb (VOID) Cmd->EndTag = 0; Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_MBOX_VC_CHANNEL, &Result); - ReleaseSpinLock (&mMailboxLock); if (EFI_ERROR (Status) || Cmd->BufferHead.Response != RPI_MBOX_RESP_SUCCESS) { DEBUG ((DEBUG_ERROR, "%a: mailbox transaction error: Status == %r, Response == 0x%x\n", __FUNCTION__, Status, Cmd->BufferHead.Response)); + ReleaseSpinLock (&mMailboxLock); return EFI_DEVICE_ERROR; } + ReleaseSpinLock (&mMailboxLock); + return EFI_SUCCESS; } @@ -935,19 +944,20 @@ RpiFirmwareAllocFb ( Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_MBOX_VC_CHANNEL, &Result); - ReleaseSpinLock (&mMailboxLock); - if (EFI_ERROR (Status) || Cmd->BufferHead.Response != RPI_MBOX_RESP_SUCCESS) { DEBUG ((DEBUG_ERROR, "%a: mailbox transaction error: Status == %r, Response == 0x%x\n", __FUNCTION__, Status, Cmd->BufferHead.Response)); + ReleaseSpinLock (&mMailboxLock); return EFI_DEVICE_ERROR; } *Pitch = Cmd->Pitch.Pitch; *FbBase = Cmd->AllocFb.AlignmentBase - BCM2836_DMA_DEVICE_OFFSET; *FbSize = Cmd->AllocFb.Size; + ReleaseSpinLock (&mMailboxLock); + return EFI_SUCCESS; } @@ -999,13 +1009,12 @@ RpiFirmwareGetCommmandLine ( Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_MBOX_VC_CHANNEL, &Result); - ReleaseSpinLock (&mMailboxLock); - if (EFI_ERROR (Status) || Cmd->BufferHead.Response != RPI_MBOX_RESP_SUCCESS) { DEBUG ((DEBUG_ERROR, "%a: mailbox transaction error: Status == %r, Response == 0x%x\n", __FUNCTION__, Status, Cmd->BufferHead.Response)); + ReleaseSpinLock (&mMailboxLock); return EFI_DEVICE_ERROR; } @@ -1013,6 +1022,7 @@ RpiFirmwareGetCommmandLine ( if (Cmd->TagHead.TagValueSize >= BufferSize && Cmd->CommandLine[Cmd->TagHead.TagValueSize - 1] != '\0') { DEBUG ((DEBUG_ERROR, "%a: insufficient buffer size\n", __FUNCTION__)); + ReleaseSpinLock (&mMailboxLock); return EFI_OUT_OF_RESOURCES; } @@ -1026,6 +1036,7 @@ RpiFirmwareGetCommmandLine ( CommandLine[Cmd->TagHead.TagValueSize] = '\0'; } + ReleaseSpinLock (&mMailboxLock); return EFI_SUCCESS; } @@ -1075,18 +1086,20 @@ RpiFirmwareSetClockRate ( Cmd->TagBody.SkipTurbo = SkipTurbo ? 1 : 0; Cmd->EndTag = 0; + DEBUG ((DEBUG_INFO, "%a: Request clock rate %X = %d\n", __FUNCTION__, ClockId, ClockRate)); Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_MBOX_VC_CHANNEL, &Result); - ReleaseSpinLock (&mMailboxLock); - if (EFI_ERROR (Status) || Cmd->BufferHead.Response != RPI_MBOX_RESP_SUCCESS) { DEBUG ((DEBUG_ERROR, "%a: mailbox transaction error: Status == %r, Response == 0x%x\n", __FUNCTION__, Status, Cmd->BufferHead.Response)); + ReleaseSpinLock (&mMailboxLock); return EFI_DEVICE_ERROR; } + ReleaseSpinLock (&mMailboxLock); + return EFI_SUCCESS; } @@ -1131,20 +1144,23 @@ RpiFirmwareGetClockRate ( Cmd->TagHead.TagValueSize = 0; Cmd->TagBody.ClockId = ClockId; Cmd->EndTag = 0; - + Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_MBOX_VC_CHANNEL, &Result); - ReleaseSpinLock (&mMailboxLock); - if (EFI_ERROR (Status) || Cmd->BufferHead.Response != RPI_MBOX_RESP_SUCCESS) { DEBUG ((DEBUG_ERROR, "%a: mailbox transaction error: Status == %r, Response == 0x%x\n", __FUNCTION__, Status, Cmd->BufferHead.Response)); + ReleaseSpinLock (&mMailboxLock); return EFI_DEVICE_ERROR; } *ClockRate = Cmd->TagBody.ClockRate; + ReleaseSpinLock (&mMailboxLock); + + DEBUG ((DEBUG_INFO, "%a: Get Clock Rate return: ClockRate=%d ClockId=%X\n", __FUNCTION__, *ClockRate, ClockId)); + return EFI_SUCCESS; } @@ -1191,7 +1207,7 @@ RpiFirmwareGetMinClockRate ( { return RpiFirmwareGetClockRate (ClockId, RPI_MBOX_GET_MIN_CLOCK_RATE, ClockRate); } - + #pragma pack() typedef struct { UINT32 ClockId; @@ -1236,16 +1252,17 @@ RpiFirmwareSetClockState ( Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_MBOX_VC_CHANNEL, &Result); - ReleaseSpinLock (&mMailboxLock); - if (EFI_ERROR (Status) || Cmd->BufferHead.Response != RPI_MBOX_RESP_SUCCESS) { DEBUG ((DEBUG_ERROR, "%a: mailbox transaction error: Status == %r, Response == 0x%x\n", __FUNCTION__, Status, Cmd->BufferHead.Response)); + ReleaseSpinLock (&mMailboxLock); return EFI_DEVICE_ERROR; } + ReleaseSpinLock (&mMailboxLock); + return EFI_SUCCESS; } @@ -1297,16 +1314,15 @@ RpiFirmwareSetGpio ( Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_MBOX_VC_CHANNEL, &Result); - ReleaseSpinLock (&mMailboxLock); - if (EFI_ERROR (Status) || Cmd->BufferHead.Response != RPI_MBOX_RESP_SUCCESS) { DEBUG ((DEBUG_ERROR, "%a: mailbox transaction error: Status == %r, Response == 0x%x\n", __FUNCTION__, Status, Cmd->BufferHead.Response)); } + ReleaseSpinLock (&mMailboxLock); } - + STATIC VOID EFIAPI @@ -1361,8 +1377,6 @@ RpiFirmwareNotifyXhciReset ( Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_MBOX_VC_CHANNEL, &Result); - ReleaseSpinLock (&mMailboxLock); - if (EFI_ERROR (Status) || Cmd->BufferHead.Response != RPI_MBOX_RESP_SUCCESS) { DEBUG ((DEBUG_ERROR, @@ -1370,6 +1384,8 @@ RpiFirmwareNotifyXhciReset ( __FUNCTION__, Status, Cmd->BufferHead.Response)); } + ReleaseSpinLock (&mMailboxLock); + return Status; } @@ -1424,8 +1440,6 @@ RpiFirmwareNotifyGpioGetCfg ( *Polarity = Cmd->TagBody.Polarity; - ReleaseSpinLock (&mMailboxLock); - if (EFI_ERROR (Status) || Cmd->BufferHead.Response != RPI_MBOX_RESP_SUCCESS) { DEBUG ((DEBUG_ERROR, @@ -1433,6 +1447,8 @@ RpiFirmwareNotifyGpioGetCfg ( __FUNCTION__, Status, Cmd->BufferHead.Response)); } + ReleaseSpinLock (&mMailboxLock); + return Status; } @@ -1471,8 +1487,8 @@ RpiFirmwareNotifyGpioSetCfg ( Status = RpiFirmwareNotifyGpioGetCfg (Gpio, &Result); if (EFI_ERROR (Status)) { - DEBUG ((DEBUG_ERROR, "%a: Failed to get GPIO polarity\n", __FUNCTION__)); - Result = 0; //default polarity + DEBUG ((DEBUG_ERROR, "%a: Failed to get GPIO polarity\n", __FUNCTION__)); + Result = 0; //default polarity } @@ -1488,7 +1504,7 @@ RpiFirmwareNotifyGpioSetCfg ( Cmd->BufferHead.Response = 0; Cmd->TagHead.TagId = RPI_MBOX_SET_GPIO_CONFIG; Cmd->TagHead.TagSize = sizeof (Cmd->TagBody); - + Cmd->TagBody.Gpio = 128 + Gpio; Cmd->TagBody.Direction = Direction; Cmd->TagBody.Polarity = Result; @@ -1501,17 +1517,17 @@ RpiFirmwareNotifyGpioSetCfg ( Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_MBOX_VC_CHANNEL, &Result); - ReleaseSpinLock (&mMailboxLock); - if (EFI_ERROR (Status) || Cmd->BufferHead.Response != RPI_MBOX_RESP_SUCCESS) { DEBUG ((DEBUG_ERROR, "%a: mailbox transaction error: Status == %r, Response == 0x%x\n", __FUNCTION__, Status, Cmd->BufferHead.Response)); } - - RpiFirmwareSetGpio (Gpio,!State); - + + ReleaseSpinLock (&mMailboxLock); + + RpiFirmwareSetGpio (Gpio,!State); + return Status; } @@ -1540,7 +1556,7 @@ STATIC RASPBERRY_PI_FIRMWARE_PROTOCOL mRpiFirmwareProtocol = { RPiFirmwareGetModelInstalledMB, RpiFirmwareNotifyXhciReset, RpiFirmwareGetCurrentClockState, - RpiFirmwareSetClockState, + RpiFirmwareSetClockState, RpiFirmwareNotifyGpioSetCfg }; -- 2.13.7 -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#82252): https://edk2.groups.io/g/devel/message/82252 Mute This Topic: https://groups.io/mt/86424962/21656 Group Owner: devel+ow...@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-