On Thu, 2 Dec 2021 at 18:03, Ard Biesheuvel <a...@kernel.org> wrote: > > On Thu, 2 Dec 2021 at 17:52, Jeremy Linton <jeremy.lin...@arm.com> wrote: > > > > The RPi4 has a SPI flash with unused capacity. This set detects if > > that capacity is sufficient for a UEFI variable store and utilizes > > it as such. This fixes a long list of problems, and along the way likely > > also fixes a random boot failure caused by the FaultTolerantWriteDxe > > garbage collecting, and erasing the flash volume header which is being > > used to return information about the underlying variable storage capacity. > > > > This set was dependent on an earlier, mostly ignored set of changes to > > move the GPIO/etc devices into their own SSDT and disable them. Because > > of that, the two sets have been merged. > > > > Why is that? Because the SPI flash is mux'ed with the PWM used to play > > audio out the 3.5mm audio jack on this device. This causes a long list > > of problems we must try and avoid, starting with the fact that the pins > > need to be controlled by the uefi runtime service. The other problem is > > obviously that any time a variable is updated, if the user is utilizing > > the 3.5mm audio they will hear clicks and pops. Turns out that behavior > > isn't unique to this patch set because the low level boot/etc exhibits this > > when running in a TFA+uboot/edk2 environment. A fairly small tweak to TFA > > fixes the majority of this, and the remaining runtime problems caused > > by this patch actually are very slight and generally not noticeable unless > > one goes looking for them. OTOH, we revert to the earlier non persisted > > variable store if the firmware is running in a DT only mode, or the > > user enables the ACPI GPIO block. > > > > > > Jeremy Linton (9): > > Platform/RaspberryPi: Cleanup menu visibility > > Platform/RaspberryPi: Give the user control over the XHCI mailbox > > Platform/RaspberryPi: Move GPIO/SPI/I2C to SSDT > > Platform/RaspberryPi: Add menu item to enable/disable GPIO > > Platform/RaspberryPi: Add constants for controlling SPI > > Platform/RaspberryPi: Add mailbox cmd to control audio amp > > Platform/RaspberryPi: Add SPI/GPIO to memory map > > Platform/RaspberryPi: Allow pin function selection at runtime > > Platform/RaspberryPi: Add SPI flash variable store. > > > > Very nice! > > I am having trouble applying these patches, though. Could you please > resend without the random whitespace changes?
It appears only 2/9 is affected, the remaining ones apply cleanly, with the exception of 9/9, which seems to be missing entirely. Could you please resend that one as well? -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#84264): https://edk2.groups.io/g/devel/message/84264 Mute This Topic: https://groups.io/mt/87456856/21656 Group Owner: devel+ow...@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-