+ }
+
+ return Data;
+}
+
+/**
+ Reads an 8-bit PCI configuration register.
+
+ Reads and returns the 8-bit PCI configuration register specified by Address.
+ This function must guarantee that all PCI read and write operations are
+ serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus,
+ Device, Function and Register.
+
+ @return The 8-bit PCI configuration register specified by the Address.
+**/
+UINT8
+EFIAPI
+PciSegmentRead8 (
+ IN UINT64 Address
+ )
+{
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 0);
+
+ return (UINT8) PciSegmentLibReadWorker (Address, PciCfgWidthUint8);
+}
+
+/**
+ Writes an 8-bit PCI configuration register.
+
+ Writes the 8-bit Value in the PCI configuration register specified by the
+ Address. This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus,
+ Device, Function, and Register.
+ @param Value The value to write.
+
+ @return The value written to the PCI configuration register.
+**/
+UINT8
+EFIAPI
+PciSegmentWrite8 (
+ IN UINT64 Address,
+ IN UINT8 Value
+ )
+{
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 0);
+
+ return (UINT8) PciSegmentLibWriteWorker (Address, PciCfgWidthUint8, Value);
+}
+
+/**
+ Performs a bitwise OR of an 8-bit PCI configuration register with
+ an 8-bit value.
+
+ Reads the 8-bit PCI configuration register specified by Address,
+ performs a bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 8-bit PCI configuration register
+ specified by Address.
+
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device,
+ Function, and Register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+**/
+UINT8
+EFIAPI
+PciSegmentOr8 (
+ IN UINT64 Address,
+ IN UINT8 OrData
+ )
+{
+ return PciSegmentWrite8 (Address,
+ (UINT8) (PciSegmentRead8 (Address) | OrData));
+}
+
+/**
+ Performs a bitwise AND of an 8-bit PCI configuration register with
+ an 8-bit value.
+
+ Reads the 8-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified by
+ AndData, and writes the result to the 8-bit PCI configuration register
+ specified by Address.
+
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations
+ are serialized. If any reserved bits in Address are set, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device,
+ Function, and Register.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+**/
+UINT8
+EFIAPI
+PciSegmentAnd8 (
+ IN UINT64 Address,
+ IN UINT8 AndData
+ )
+{
+ return PciSegmentWrite8 (Address,
+ (UINT8) (PciSegmentRead8 (Address) & AndData));
+}
+
+/**
+ Performs a bitwise AND of an 8-bit PCI configuration register with
+ an 8-bit value, followed by a bitwise OR with another 8-bit value.
+
+ Reads the 8-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified
+ by AndData, performs a bitwise OR between the result of the AND operation
+ and the value specified by OrData, and writes the result to the 8-bit
+ PCI configuration register specified by Address.
+
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device,
+ Function, and Register.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentAndThenOr8 (
+ IN UINT64 Address,
+ IN UINT8 AndData,
+ IN UINT8 OrData
+ )
+{
+ return PciSegmentWrite8 (Address,
+ (UINT8) ((PciSegmentRead8 (Address) & AndData)
+ | OrData));
+}
+
+/**
+ Reads a bit field of a PCI configuration register.
+
+ Reads the bit field in an 8-bit PCI configuration register. The bit field is
+ specified by the StartBit and the EndBit. The value of the bit field is
+ returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+
+ @param Address The PCI configuration register to read.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+
+ @return The value of the bit field read from the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentBitFieldRead8 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit
+ )
+{
+ return BitFieldRead8 (PciSegmentRead8 (Address), StartBit, EndBit);
+}
+
+/**
+ Writes a bit field to a PCI configuration register.
+
+ Writes Value to the bit field of the PCI configuration register. The bit
+ field is specified by the StartBit and the EndBit. All other bits in the
+ destination PCI configuration register are preserved. The new value of the
+ 8-bit register is returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If Value is larger than the bitmask value range specified by StartBit
+ and EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+ @param Value The new value of the bit field.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentBitFieldWrite8 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT8 Value
+ )
+{
+ return PciSegmentWrite8 (Address,
+ BitFieldWrite8 (PciSegmentRead8 (Address),
+ StartBit,
+ EndBit,
+ Value));
+}
+
+/**
+ Reads a bit field in an 8-bit PCI configuration, performs a bitwise OR, and
+ writes the result back to the bit field in the 8-bit port.
+
+ Reads the 8-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 8-bit PCI configuration register
+ specified by Address. The value written to the PCI configuration register is
+ returned. This function must guarantee that all PCI read and write operations
+ are serialized. Extra left bits in OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and
+ EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentBitFieldOr8 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT8 OrData
+ )
+{
+ return PciSegmentWrite8 (Address,
+ BitFieldOr8 (PciSegmentRead8 (Address),
+ StartBit,
+ EndBit,
+ OrData));
+}
+
+/**
+ Reads a bit field in an 8-bit PCI configuration register, performs a bitwise
+ AND, and writes the result back to the bit field in the 8-bit register.
+
+ Reads the 8-bit PCI configuration register specified by Address, performs a
+ bitwise AND between the read result and the value specified by AndData, and
+ writes the result to the 8-bit PCI configuration register specified by
+ Address. The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are
+ serialized. Extra left bits in AndData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and
+ EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentBitFieldAnd8 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT8 AndData
+ )
+{
+ return PciSegmentWrite8 (Address,
+ BitFieldAnd8 (PciSegmentRead8 (Address),
+ StartBit,
+ EndBit,
+ AndData));
+}
+
+/**
+ Reads a bit field in an 8-bit port, performs a bitwise AND followed by a
+ bitwise OR, and writes the result back to the bit field in the
+ 8-bit port.
+
+ Reads the 8-bit PCI configuration register specified by Address, performs a
+ bitwise AND followed by a bitwise OR between the read result and
+ the value specified by AndData, and writes the result to the 8-bit PCI
+ configuration register specified by Address. The value written to the PCI
+ configuration register is returned. This function must guarantee that all PCI
+ read and write operations are serialized. Extra left bits in both AndData and
+ OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit
+ and EndBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit
+ and EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the result of the AND operation.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentBitFieldAndThenOr8 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT8 AndData,
+ IN UINT8 OrData
+ )
+{
+ return PciSegmentWrite8 (Address,
+ BitFieldAndThenOr8 (PciSegmentRead8 (Address),
+ StartBit,
+ EndBit,
+ AndData,
+ OrData));
+}
+
+/**
+ Reads a 16-bit PCI configuration register.
+
+ Reads and returns the 16-bit PCI configuration register specified by Address.
+ This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device,
+ Function, and Register.
+
+ @return The 16-bit PCI configuration register specified by Address.
+
+**/
+UINT16
+EFIAPI
+PciSegmentRead16 (
+ IN UINT64 Address
+ )
+{
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 1);
+
+ return (UINT16) PciSegmentLibReadWorker (Address, PciCfgWidthUint16);
+}
+
+/**
+ Writes a 16-bit PCI configuration register.
+
+ Writes the 16-bit PCI configuration register specified by Address with the
+ value specified by Value. Value is returned.
+ This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device,
+ Function, and Register.
+ @param Value The value to write.
+
+ @return The Value written is returned.
+
+**/
+UINT16
+EFIAPI
+PciSegmentWrite16 (
+ IN UINT64 Address,
+ IN UINT16 Value
+ )
+{
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 1);
+
+ return (UINT16) PciSegmentLibWriteWorker (Address, PciCfgWidthUint16, Value);
+}
+
+/**
+ Performs a bitwise OR of a 16-bit PCI configuration register with
+ a 16-bit value.
+
+ Reads the 16-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 16-bit PCI configuration register
+ specified by Address. The value written to the PCI configuration register is
+ returned. This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device,
+ Function and Register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentOr16 (
+ IN UINT64 Address,
+ IN UINT16 OrData
+ )
+{
+ return PciSegmentWrite16 (Address,
+ (UINT16) (PciSegmentRead16 (Address) | OrData));
+}
+
+/**
+ Performs a bitwise AND of a 16-bit PCI configuration register with
+ a 16-bit value.
+
+ Reads the 16-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified
+ by AndData, and writes the result to the 16-bit PCI configuration register
+ specified by the Address.
+
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device,
+ Function, and Register.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentAnd16 (
+ IN UINT64 Address,
+ IN UINT16 AndData
+ )
+{
+ return PciSegmentWrite16 (Address,
+ (UINT16) (PciSegmentRead16 (Address) & AndData));
+}
+
+/**
+ Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit
+ value, followed a bitwise OR with another 16-bit value.
+
+ Reads the 16-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified by
+ AndData, performs a bitwise OR between the result of the AND operation and
+ the value specified by OrData, and writes the result to the 16-bit PCI
+ configuration register specified by the Address.
+
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device,
+ Function, and Register.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentAndThenOr16 (
+ IN UINT64 Address,
+ IN UINT16 AndData,
+ IN UINT16 OrData
+ )
+{
+ return PciSegmentWrite16 (Address,
+ (UINT16) ((PciSegmentRead16 (Address) & AndData)
+ | OrData));
+}
+
+/**
+ Reads a bit field of a PCI configuration register.
+
+ Reads the bit field in a 16-bit PCI configuration register. The bit field is
+ specified by the StartBit and the EndBit. The value of the bit field is
+ returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+
+ @param Address The PCI configuration register to read.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+
+ @return The value of the bit field read from the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentBitFieldRead16 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit
+ )
+{
+ return BitFieldRead16 (PciSegmentRead16 (Address), StartBit, EndBit);
+}
+
+/**
+ Writes a bit field to a PCI configuration register.
+
+ Writes Value to the bit field of the PCI configuration register. The bit
+ field is specified by the StartBit and the EndBit. All other bits in the
+ destination PCI configuration register are preserved. The new value of the
+ 16-bit register is returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If Value is larger than the bitmask value range specified by StartBit and
+ EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+ @param Value The new value of the bit field.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentBitFieldWrite16 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT16 Value
+ )
+{
+ return PciSegmentWrite16 (Address,
+ BitFieldWrite16 (PciSegmentRead16 (Address),
+ StartBit,
+ EndBit,
+ Value));
+}
+
+/**
+ Reads the 16-bit PCI configuration register specified by Address,
+ performs a bitwise OR between the read result and the value specified
+ by OrData, and writes the result to the 16-bit PCI configuration register
+ specified by the Address.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and
+ EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentBitFieldOr16 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT16 OrData
+ )
+{
+ return PciSegmentWrite16 (Address,
+ BitFieldOr16 (PciSegmentRead16 (Address),
+ StartBit,
+ EndBit,
+ OrData));
+}
+
+/**
+ Reads a bit field in a 16-bit PCI configuration, performs a bitwise OR,
+ and writes the result back to the bit field in the 16-bit port.
+
+ Reads the 16-bit PCI configuration register specified by Address,
+ performs a bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 16-bit PCI configuration register
+ specified by the Address.
+
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are
+ serialized. Extra left bits in OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and
+ EndBit, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device,
+ Function, and Register.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ The ordinal of the least significant bit in a byte is
+ bit 0.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ The ordinal of the most significant bit in a byte is bit 7.
+ @param AndData The value to AND with the read value from the PCI
+ configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentBitFieldAnd16 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT16 AndData
+ )
+{
+ return PciSegmentWrite16 (Address,
+ BitFieldAnd16 (PciSegmentRead16 (Address),
+ StartBit,
+ EndBit,
+ AndData));
+}
+
+/**
+ Reads a bit field in a 16-bit port, performs a bitwise AND followed by a
+ bitwise OR, and writes the result back to the bit field in the
+ 16-bit port.
+
+ Reads the 16-bit PCI configuration register specified by Address, performs a
+ bitwise AND followed by a bitwise OR between the read result and
+ the value specified by AndData, and writes the result to the 16-bit PCI
+ configuration register specified by Address. The value written to the PCI
+ configuration register is returned. This function must guarantee that all PCI
+ read and write operations are serialized. Extra left bits in both AndData and
+ OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and
+ EndBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and
+ EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the result of the AND operation.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentBitFieldAndThenOr16 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT16 AndData,
+ IN UINT16 OrData
+ )
+{
+ return PciSegmentWrite16 (Address,
+ BitFieldAndThenOr16 (PciSegmentRead16 (Address),
+ StartBit,
+ EndBit,
+ AndData,
+ OrData));
+}
+
+/**
+ Reads a 32-bit PCI configuration register.
+
+ Reads and returns the 32-bit PCI configuration register specified by Address.
+ This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus,
+ Device, Function and Register.
+
+ @return The 32-bit PCI configuration register specified by Address.
+
+**/
+UINT32
+EFIAPI
+PciSegmentRead32 (
+ IN UINT64 Address
+ )
+{
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 3);
+
+ return PciSegmentLibReadWorker (Address, PciCfgWidthUint32);
+}
+
+/**
+ Writes a 32-bit PCI configuration register.
+
+ Writes the 32-bit PCI configuration register specified by Address with the
+ value specified by Value. Value is returned. This function must guarantee
+ that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device,
+ Function, and Register.
+ @param Value The value to write.
+
+ @return The parameter of Value.
+
+**/
+UINT32
+EFIAPI
+PciSegmentWrite32 (
+ IN UINT64 Address,
+ IN UINT32 Value
+ )
+{
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 3);
+
+ return PciSegmentLibWriteWorker (Address, PciCfgWidthUint32, Value);
+}
+
+/**
+ Performs a bitwise OR of a 32-bit PCI configuration register with a
+ 32-bit value.
+
+ Reads the 32-bit PCI configuration register specified by Address,
+ performs a bitwise OR between the read result and the value specified
+ by OrData, and writes the result to the 32-bit PCI configuration register
+ specified by Address.
+
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device,
+ Function, and Register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentOr32 (
+ IN UINT64 Address,
+ IN UINT32 OrData
+ )
+{
+ return PciSegmentWrite32 (Address, PciSegmentRead32 (Address) | OrData);
+}
+
+/**
+ Performs a bitwise AND of a 32-bit PCI configuration register with
+ a 32-bit value.
+
+ Reads the 32-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified
+ by AndData, and writes the result to the 32-bit PCI configuration register
+ specified by Address.
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus,
+ Device, Function and Register.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentAnd32 (
+ IN UINT64 Address,
+ IN UINT32 AndData
+ )
+{
+ return PciSegmentWrite32 (Address, PciSegmentRead32 (Address) & AndData);
+}
+
+/**
+ Performs a bitwise AND of a 32-bit PCI configuration register with
+ a 32-bit value, followed by a bitwise OR with another 32-bit value.
+
+ Reads the 32-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified
+ by AndData, performs a bitwise OR between the result of the AND operation
+ and the value specified by OrData, and writes the result to the 32-bit
+ PCI configuration register specified by Address.
+
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device,
+ Function and Register.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentAndThenOr32 (
+ IN UINT64 Address,
+ IN UINT32 AndData,
+ IN UINT32 OrData
+ )
+{
+ return PciSegmentWrite32 (Address,
+ (PciSegmentRead32 (Address) & AndData) | OrData);
+}
+
+/**
+ Reads a bit field of a PCI configuration register.
+
+ Reads the bit field in a 32-bit PCI configuration register. The bit field is
+ specified by the StartBit and the EndBit. The value of the bit field is
+ returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+
+ @param Address The PCI configuration register to read.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+
+ @return The value of the bit field read from the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentBitFieldRead32 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit
+ )
+{
+ return BitFieldRead32 (PciSegmentRead32 (Address), StartBit, EndBit);
+}
+
+/**
+ Writes a bit field to a PCI configuration register.
+
+ Writes Value to the bit field of the PCI configuration register. The bit
+ field is specified by the StartBit and the EndBit. All other bits in the
+ destination PCI configuration register are preserved. The new value of the
+ 32-bit register is returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If Value is larger than the bitmask value range specified by StartBit
+ and EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+ @param Value The new value of the bit field.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentBitFieldWrite32 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT32 Value
+ )
+{
+ return PciSegmentWrite32 (Address,
+ BitFieldWrite32 (PciSegmentRead32 (Address),
+ StartBit,
+ EndBit,
+ Value));
+}
+
+/**
+ Reads a bit field in a 32-bit PCI configuration, performs a bitwise OR, and
+ writes the result back to the bit field in the 32-bit port.
+
+ Reads the 32-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 32-bit PCI configuration register
+ specified by Address. The value written to the PCI configuration register is
+ returned. This function must guarantee that all PCI read and write operations
+ are serialized. Extra left bits in OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and
+ EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentBitFieldOr32 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT32 OrData
+ )
+{
+ return PciSegmentWrite32 (Address,
+ BitFieldOr32 (PciSegmentRead32 (Address),
+ StartBit,
+ EndBit,
+ OrData));
+}
+
+/**
+ Reads a bit field in a 32-bit PCI configuration register, performs a bitwise
+ AND, and writes the result back to the bit field in the 32-bit register.
+
+ Reads the 32-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified
+ by AndData, and writes the result to the 32-bit PCI configuration register
+ specified by Address. The value written to the PCI configuration register
+ is returned. This function must guarantee that all PCI read and write
+ operations are serialized. Extra left bits in AndData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and
+ EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentBitFieldAnd32 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT32 AndData
+ )
+{
+ return PciSegmentWrite32 (Address,
+ BitFieldAnd32 (PciSegmentRead32 (Address),
+ StartBit,
+ EndBit,
+ AndData));
+}
+
+/**
+ Reads a bit field in a 32-bit port, performs a bitwise AND followed by a
+ bitwise OR, and writes the result back to the bit field in the
+ 32-bit port.
+
+ Reads the 32-bit PCI configuration register specified by Address, performs a
+ bitwise AND followed by a bitwise OR between the read result and
+ the value specified by AndData, and writes the result to the 32-bit PCI
+ configuration register specified by Address. The value written to the PCI
+ configuration register is returned. This function must guarantee that all PCI
+ read and write operations are serialized. Extra left bits in both AndData and
+ OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit
+ and EndBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit
+ and EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the result of the AND operation.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentBitFieldAndThenOr32 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT32 AndData,
+ IN UINT32 OrData
+ )
+{
+ return PciSegmentWrite32 (
+ Address,
+ BitFieldAndThenOr32 (PciSegmentRead32 (Address),
+ StartBit,
+ EndBit,
+ AndData,
+ OrData));
+}
+
+/**
+ Reads a range of PCI configuration registers into a caller supplied buffer.
+
+ Reads the range of PCI configuration registers specified by StartAddress and
+ Size into the buffer specified by Buffer. This function only allows the PCI
+ configuration registers from a single PCI function to be read. Size is
+ returned. When possible 32-bit PCI configuration read cycles are used to read
+ from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit
+ and 16-bit PCI configuration read cycles may be used at the beginning and the
+ end of the range.
+
+ If any reserved bits in StartAddress are set, then ASSERT().
+ If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().
+ If Size > 0 and Buffer is NULL, then ASSERT().
+
+ @param StartAddress The starting address that encodes the PCI Segment, Bus,
+ Device, Function and Register.
+ @param Size The size in bytes of the transfer.
+ @param Buffer The pointer to a buffer receiving the data read.
+
+ @return Size
+
+**/
+UINTN
+EFIAPI
+PciSegmentReadBuffer (
+ IN UINT64 StartAddress,
+ IN UINTN Size,
+ OUT VOID *Buffer
+ )
+{
+ UINTN ReturnValue;
+
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (StartAddress, 0);
+ ASSERT (((StartAddress & 0xFFF) + Size) <= 0x1000);