Hi Ming, I am not sure if this is an issue at my end, but I cannot apply this patch series, can you check, please? Also, is it possible to share these patches on a Github branch.
Regards, Sami Mujawar On 30/03/2022, 10:37, "Ming Huang" <huangm...@linux.alibaba.com> wrote: Hi, Any comment about this series? 在 12/31/21 7:06 PM, Ming Huang 写道: > There are two scene communicate with StandaloneMm(MM): > 1 edk2 -> TF-A -> MM, communicate MM use non-secure buffer which > specify by EFI_SECURE_PARTITION_BOOT_INFO.SpNsCommBufBase; > 2 RAS scene: fiq -> TF-A -> MM, use secure buffer which > specify by EFI_SECURE_PARTITION_BOOT_INFO.SpShareBufBase; > > For now, the second scene will failed because check buffer address. > This patch add CheckBufferAddr() to support check address for secure > buffer. > > Signed-off-by: Ming Huang <huangm...@linux.alibaba.com> > --- > StandaloneMmPkg/Drivers/StandaloneMmCpu/EventHandle.c | 54 +++++++++++++++----- > StandaloneMmPkg/Drivers/StandaloneMmCpu/StandaloneMmCpu.c | 21 ++++++++ > StandaloneMmPkg/Drivers/StandaloneMmCpu/StandaloneMmCpu.h | 1 + > 3 files changed, 63 insertions(+), 13 deletions(-) > > diff --git a/StandaloneMmPkg/Drivers/StandaloneMmCpu/EventHandle.c b/StandaloneMmPkg/Drivers/StandaloneMmCpu/EventHandle.c > index 5dfaf9d751..d0ba415671 100644 > --- a/StandaloneMmPkg/Drivers/StandaloneMmCpu/EventHandle.c > +++ b/StandaloneMmPkg/Drivers/StandaloneMmCpu/EventHandle.c > @@ -50,6 +50,7 @@ EFI_MM_COMMUNICATE_HEADER **PerCpuGuidedEventContext = NULL; > > // Descriptor with whereabouts of memory used for communication with the normal world > EFI_MMRAM_DESCRIPTOR mNsCommBuffer; > +EFI_MMRAM_DESCRIPTOR mSCommBuffer; > > MP_INFORMATION_HOB_DATA *mMpInformationHobData; > > @@ -60,6 +61,42 @@ EFI_MM_CONFIGURATION_PROTOCOL mMmConfig = { > > STATIC EFI_MM_ENTRY_POINT mMmEntryPoint = NULL; > > +STATIC > +EFI_STATUS > +CheckBufferAddr ( > + IN UINTN BufferAddr > + ) > +{ > + UINT64 NsCommBufferEnd; > + UINT64 SCommBufferEnd; > + UINT64 CommBufferEnd; > + > + NsCommBufferEnd = mNsCommBuffer.PhysicalStart + mNsCommBuffer.PhysicalSize; > + SCommBufferEnd = mSCommBuffer.PhysicalStart + mSCommBuffer.PhysicalSize; > + > + if ((BufferAddr >= mNsCommBuffer.PhysicalStart) && > + (BufferAddr < NsCommBufferEnd)) { > + CommBufferEnd = NsCommBufferEnd; > + } else if ((BufferAddr >= mSCommBuffer.PhysicalStart) && > + (BufferAddr < SCommBufferEnd)) { > + CommBufferEnd = SCommBufferEnd; > + } else { > + return EFI_ACCESS_DENIED; > + } > + > + if ((CommBufferEnd - BufferAddr) < sizeof (EFI_MM_COMMUNICATE_HEADER)) { > + return EFI_ACCESS_DENIED; > + } > + > + // perform bounds check. > + if ((CommBufferEnd - BufferAddr - sizeof (EFI_MM_COMMUNICATE_HEADER)) < > + ((EFI_MM_COMMUNICATE_HEADER *) BufferAddr)->MessageLength) { > + return EFI_ACCESS_DENIED; > + } > + > + return EFI_SUCCESS; > +} > + > /** > The PI Standalone MM entry point for the TF-A CPU driver. > > @@ -104,25 +141,16 @@ PiMmStandaloneArmTfCpuDriverEntry ( > return EFI_INVALID_PARAMETER; > } > > - if (NsCommBufferAddr < mNsCommBuffer.PhysicalStart) { > - return EFI_ACCESS_DENIED; > - } > - > - if ((NsCommBufferAddr + sizeof (EFI_MM_COMMUNICATE_HEADER)) >= > - (mNsCommBuffer.PhysicalStart + mNsCommBuffer.PhysicalSize)) { > - return EFI_INVALID_PARAMETER; > + Status = CheckBufferAddr (NsCommBufferAddr); > + if (EFI_ERROR (Status)) { > + DEBUG ((DEBUG_ERROR, "Check Buffer failed: %r\n", Status)); > + return Status; > } > > // Find out the size of the buffer passed > NsCommBufferSize = ((EFI_MM_COMMUNICATE_HEADER *) NsCommBufferAddr)->MessageLength + > sizeof (EFI_MM_COMMUNICATE_HEADER); > > - // perform bounds check. > - if (NsCommBufferAddr + NsCommBufferSize >= > - mNsCommBuffer.PhysicalStart + mNsCommBuffer.PhysicalSize) { > - return EFI_ACCESS_DENIED; > - } > - > GuidedEventContext = NULL; > // Now that the secure world can see the normal world buffer, allocate > // memory to copy the communication buffer to the secure world. > diff --git a/StandaloneMmPkg/Drivers/StandaloneMmCpu/StandaloneMmCpu.c b/StandaloneMmPkg/Drivers/StandaloneMmCpu/StandaloneMmCpu.c > index fd9c59b4da..96dad20dd1 100644 > --- a/StandaloneMmPkg/Drivers/StandaloneMmCpu/StandaloneMmCpu.c > +++ b/StandaloneMmPkg/Drivers/StandaloneMmCpu/StandaloneMmCpu.c > @@ -107,6 +107,7 @@ StandaloneMmCpuInitialize ( > UINTN Index; > UINTN ArraySize; > VOID *HobStart; > + EFI_MMRAM_HOB_DESCRIPTOR_BLOCK *MmramRangesHob; > > ASSERT (SystemTable != NULL); > mMmst = SystemTable; > @@ -186,6 +187,26 @@ StandaloneMmCpuInitialize ( > CopyMem (&mNsCommBuffer, NsCommBufMmramRange, sizeof(EFI_MMRAM_DESCRIPTOR)); > DEBUG ((DEBUG_INFO, "mNsCommBuffer: 0x%016lx - 0x%lx\n", mNsCommBuffer.CpuStart, mNsCommBuffer.PhysicalSize)); > > + Status = GetGuidedHobData ( > + HobStart, > + &gEfiMmPeiMmramMemoryReserveGuid, > + (VOID **) &MmramRangesHob > + ); > + if (EFI_ERROR (Status)) { > + DEBUG ((DEBUG_ERROR, "MmramRangesHob data extraction failed - 0x%x\n", Status)); > + return Status; > + } > + > + // > + // As CreateHobListFromBootInfo(), the base and size of buffer shared with > + // privileged Secure world software is in second one. > + // > + CopyMem ( > + &mSCommBuffer, > + &MmramRangesHob->Descriptor[0] + 1, > + sizeof(EFI_MMRAM_DESCRIPTOR) > + ); > + > // > // Extract the MP information from the Hoblist > // > diff --git a/StandaloneMmPkg/Drivers/StandaloneMmCpu/StandaloneMmCpu.h b/StandaloneMmPkg/Drivers/StandaloneMmCpu/StandaloneMmCpu.h > index 2c96439c15..2e03b20d85 100644 > --- a/StandaloneMmPkg/Drivers/StandaloneMmCpu/StandaloneMmCpu.h > +++ b/StandaloneMmPkg/Drivers/StandaloneMmCpu/StandaloneMmCpu.h > @@ -30,6 +30,7 @@ extern EFI_MM_CPU_PROTOCOL mMmCpuState; > // > extern EFI_MM_COMMUNICATE_HEADER **PerCpuGuidedEventContext; > extern EFI_MMRAM_DESCRIPTOR mNsCommBuffer; > +extern EFI_MMRAM_DESCRIPTOR mSCommBuffer; > extern MP_INFORMATION_HOB_DATA *mMpInformationHobData; > extern EFI_MM_CONFIGURATION_PROTOCOL mMmConfig; > -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#88453): https://edk2.groups.io/g/devel/message/88453 Mute This Topic: https://groups.io/mt/88052140/21656 Group Owner: devel+ow...@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-