Hello Kun,
With the changes below:
Reviewed-by: Pierre Gondois <pierre.gond...@arm.com>
Thanks!
On 7/28/22 06:31, Kun Qin via groups.io wrote:
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3997
This change added an extra step to allow check for installed ACPI tables.
For FADT, MADT, GTDT, DSDT, DBG2 and SPCR tables, either pre-installed or
supplied through AcpiTableInfo can be accepted.
An extra check for FADT ACPI table existence during installation step is
also added.
Cc: Sami Mujawar <sami.muja...@arm.com>
Cc: Alexei Fedorov <alexei.fedo...@arm.com>
Co-authored-by: Joe Lopez <joelo...@microsoft.com>
Signed-off-by: Kun Qin <kuqi...@gmail.com>
---
Notes:
v2:
- Function description updates [Sami]
- Refactorized the table verification [Pierre]
DynamicTablesPkg/Drivers/DynamicTableManagerDxe/DynamicTableManagerDxe.c |
182 +++++++++++---------
DynamicTablesPkg/Drivers/DynamicTableManagerDxe/DynamicTableManagerDxe.inf |
1 +
2 files changed, 103 insertions(+), 80 deletions(-)
diff --git
a/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/DynamicTableManagerDxe.c
b/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/DynamicTableManagerDxe.c
index ed62299f9bbd..4ad7c0c8dbfa 100644
--- a/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/DynamicTableManagerDxe.c
+++ b/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/DynamicTableManagerDxe.c
@@ -10,6 +10,7 @@
#include <Library/DebugLib.h>
#include <Library/PcdLib.h>
#include <Library/UefiBootServicesTableLib.h>
+#include <Protocol/AcpiSystemDescriptionTable.h>
#include <Protocol/AcpiTable.h>
// Module specific include files.
@@ -22,6 +23,29 @@
#include <Protocol/DynamicTableFactoryProtocol.h>
#include <SmbiosTableGenerator.h>
+#define ACPI_TABLE_PRESENT_INFO_LIST BIT0
+#define ACPI_TABLE_PRESENT_INSTALLED BIT1
+
+#define ACPI_TABLE_VERIFY_FADT 0
+#define ACPI_TABLE_VERIFY_COUNT 6
+
+typedef struct {
+ ESTD_ACPI_TABLE_ID EstdTableId;
+ UINT32 AcpiTableSignature;
+ CHAR8 AcpiTableName[sizeof (UINT32) + 1];
+ BOOLEAN IsMandatory;
+ UINT16 Presence;
+} ACPI_TABLE_PRESENCE_INFO;
I think it needs some documentation (also for mAcpiVerifyTables).
+
+ACPI_TABLE_PRESENCE_INFO mAcpiVerifyTables[ACPI_TABLE_VERIFY_COUNT] = {
+ { EStdAcpiTableIdFadt, EFI_ACPI_6_2_FIXED_ACPI_DESCRIPTION_TABLE_SIGNATURE,
"FADT", TRUE, 0 },
+ { EStdAcpiTableIdMadt, EFI_ACPI_6_2_MULTIPLE_APIC_DESCRIPTION_TABLE_SIGNATURE,
"MADT", TRUE, 0 },
+ { EStdAcpiTableIdGtdt, EFI_ACPI_6_2_GENERIC_TIMER_DESCRIPTION_TABLE_SIGNATURE,
"GTDT", TRUE, 0 },
+ { EStdAcpiTableIdDsdt, EFI_ACPI_6_2_DIFFERENTIATED_SYSTEM_DESCRIPTION_TABLE_SIGNATURE,
"DSDT", TRUE, 0 },
+ { EStdAcpiTableIdDbg2, EFI_ACPI_6_2_DEBUG_PORT_2_TABLE_SIGNATURE,
"DBG2", FALSE, 0 },
+ { EStdAcpiTableIdSpcr, EFI_ACPI_6_2_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_SIGNATURE,
"SPCR", FALSE, 0 },
+};
+
/** This macro expands to a function that retrieves the ACPI Table
List from the Configuration Manager.
*/
@@ -395,6 +419,7 @@ BuildAndInstallAcpiTable (
@retval EFI_SUCCESS Success.
@retval EFI_NOT_FOUND If mandatory table is not found.
+ @retval EFI_ALREADY_STARTED If mandatory table found in AcpiTableInfo is
already installed.
**/
STATIC
EFI_STATUS
@@ -404,75 +429,68 @@ VerifyMandatoryTablesArePresent (
IN UINT32 AcpiTableCount
)
{
- EFI_STATUS Status;
- BOOLEAN FadtFound;
- BOOLEAN MadtFound;
- BOOLEAN GtdtFound;
- BOOLEAN DsdtFound;
- BOOLEAN Dbg2Found;
- BOOLEAN SpcrFound;
+ EFI_STATUS Status;
+ UINTN Handle;
+ UINTN Index;
+ UINTN InstalledTableIndex;
+ EFI_ACPI_DESCRIPTION_HEADER *DescHeader;
+ EFI_ACPI_TABLE_VERSION Version;
+ EFI_ACPI_SDT_PROTOCOL *AcpiSdt;
- Status = EFI_SUCCESS;
- FadtFound = FALSE;
- MadtFound = FALSE;
- GtdtFound = FALSE;
- DsdtFound = FALSE;
- Dbg2Found = FALSE;
- SpcrFound = FALSE;
ASSERT (AcpiTableInfo != NULL);
+ Status = EFI_SUCCESS;
+
+ // Check against the statically initialized ACPI tables to see if they are
in ACPI info list
while (AcpiTableCount-- != 0) {
- switch (AcpiTableInfo[AcpiTableCount].AcpiTableSignature) {
- case EFI_ACPI_6_2_FIXED_ACPI_DESCRIPTION_TABLE_SIGNATURE:
- FadtFound = TRUE;
- break;
- case EFI_ACPI_6_2_MULTIPLE_APIC_DESCRIPTION_TABLE_SIGNATURE:
- MadtFound = TRUE;
- break;
- case EFI_ACPI_6_2_GENERIC_TIMER_DESCRIPTION_TABLE_SIGNATURE:
- GtdtFound = TRUE;
- break;
- case EFI_ACPI_6_2_DIFFERENTIATED_SYSTEM_DESCRIPTION_TABLE_SIGNATURE:
- DsdtFound = TRUE;
- break;
- case EFI_ACPI_6_2_DEBUG_PORT_2_TABLE_SIGNATURE:
- Dbg2Found = TRUE;
- break;
- case EFI_ACPI_6_2_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_SIGNATURE:
- SpcrFound = TRUE;
- break;
- default:
- break;
+ for (Index = 0; Index < ACPI_TABLE_VERIFY_COUNT; Index++) {
+ if (AcpiTableInfo[AcpiTableCount].AcpiTableSignature ==
mAcpiVerifyTables[Index].AcpiTableSignature) {
+ mAcpiVerifyTables[Index].Presence |= ACPI_TABLE_PRESENT_INFO_LIST;
Would it be possible to add a 'break' here ?
Just a note for Sami:
These double loops seem expensive, but I cannot find anything better and/or
shorter.
+ }
}
}
- // We need at least the FADT, MADT, GTDT and the DSDT tables to boot
- if (!FadtFound) {
- DEBUG ((DEBUG_ERROR, "ERROR: FADT Table not found\n"));
- Status = EFI_NOT_FOUND;
- }
+ // They also might be published already, so we can search from there
+ AcpiSdt = NULL;
+ Status = gBS->LocateProtocol (&gEfiAcpiSdtProtocolGuid, NULL, (VOID
**)&AcpiSdt);
- if (!MadtFound) {
- DEBUG ((DEBUG_ERROR, "ERROR: MADT Table not found.\n"));
- Status = EFI_NOT_FOUND;
+ if (EFI_ERROR (Status) || (AcpiSdt == NULL)) {
+ DEBUG ((DEBUG_WARN, "WARNING: Failed to locate ACPI SDT protocol (0x%p) -
%r\n", AcpiSdt, Status));
+ goto EvaluatePresence;
I think this is ok to just print and return an error, unless you think about
this could happen.
}
- if (!GtdtFound) {
- DEBUG ((DEBUG_ERROR, "ERROR: GTDT Table not found.\n"));
- Status = EFI_NOT_FOUND;
- }
+ for (Index = 0; Index < ACPI_TABLE_VERIFY_COUNT; Index++) {
+ Handle = 0;
+ InstalledTableIndex = 0;
+ do {
+ Status = AcpiSdt->GetAcpiTable (InstalledTableIndex, (EFI_ACPI_SDT_HEADER
**)&DescHeader, &Version, &Handle);
+ if (EFI_ERROR (Status)) {
+ break;
+ }
- if (!DsdtFound) {
- DEBUG ((DEBUG_ERROR, "ERROR: DSDT Table not found.\n"));
- Status = EFI_NOT_FOUND;
- }
+ InstalledTableIndex++;
+ } while (DescHeader->Signature !=
mAcpiVerifyTables[Index].AcpiTableSignature);
- if (!Dbg2Found) {
- DEBUG ((DEBUG_WARN, "WARNING: DBG2 Table not found.\n"));
+ if (!EFI_ERROR (Status)) {
+ mAcpiVerifyTables[Index].Presence |= ACPI_TABLE_PRESENT_INSTALLED;
+ }
}
- if (!SpcrFound) {
- DEBUG ((DEBUG_WARN, "WARNING: SPCR Table not found.\n"));
+EvaluatePresence:
+ for (Index = 0; Index < ACPI_TABLE_VERIFY_COUNT; Index++) {
+ if (mAcpiVerifyTables[Index].Presence == 0) {
+ if (mAcpiVerifyTables[Index].IsMandatory) {
+ DEBUG ((DEBUG_ERROR, "ERROR: %a Table not found.\n",
mAcpiVerifyTables[Index].AcpiTableName));
+ Status = EFI_NOT_FOUND;
+ } else {
+ DEBUG ((DEBUG_WARN, "WARNING: %a Table not found.\n",
mAcpiVerifyTables[Index].AcpiTableName));
+ }
+ } else if (mAcpiVerifyTables[Index].Presence ==
+ (ACPI_TABLE_PRESENT_INFO_LIST | ACPI_TABLE_PRESENT_INSTALLED))
+ {
+ DEBUG ((DEBUG_ERROR, "ERROR: %a Table found while already published.\n",
mAcpiVerifyTables[Index].AcpiTableName));
+ Status = EFI_ALREADY_STARTED;
+ }
}
Just a note for Sami:
In the loop above we return the last invalid code, this should be ok.
return Status;
@@ -489,8 +507,9 @@ VerifyMandatoryTablesArePresent (
@param [in] CfgMgrProtocol Pointer to the Configuration Manager
Protocol Interface.
- @retval EFI_SUCCESS Success.
- @retval EFI_NOT_FOUND If a mandatory table or a generator is not found.
+ @retval EFI_SUCCESS Success.
+ @retval EFI_NOT_FOUND If a mandatory table or a generator is not
found.
+ @retval EFI_ALREADY_STARTED If mandatory table found in AcpiTableInfo is
already installed.
**/
STATIC
EFI_STATUS
@@ -562,7 +581,7 @@ ProcessAcpiTables (
if (EFI_ERROR (Status)) {
DEBUG ((
DEBUG_ERROR,
- "ERROR: Failed to find mandatory ACPI Table(s)."
+ "ERROR: Failed to verify mandatory ACPI Table(s) presence."
" Status = %r\n",
Status
));
@@ -570,29 +589,32 @@ ProcessAcpiTables (
}
// Add the FADT Table first.
- for (Idx = 0; Idx < AcpiTableCount; Idx++) {
- if (CREATE_STD_ACPI_TABLE_GEN_ID (EStdAcpiTableIdFadt) ==
- AcpiTableInfo[Idx].TableGeneratorId)
- {
- Status = BuildAndInstallAcpiTable (
- TableFactoryProtocol,
- CfgMgrProtocol,
- AcpiTableProtocol,
- &AcpiTableInfo[Idx]
- );
- if (EFI_ERROR (Status)) {
- DEBUG ((
- DEBUG_ERROR,
- "ERROR: Failed to find build and install ACPI FADT Table." \
- " Status = %r\n",
- Status
- ));
- return Status;
- }
+ if ((mAcpiVerifyTables[ACPI_TABLE_VERIFY_FADT].Presence &
ACPI_TABLE_PRESENT_INSTALLED) == 0) {
+ // FADT is not yet installed
+ for (Idx = 0; Idx < AcpiTableCount; Idx++) {
+ if (CREATE_STD_ACPI_TABLE_GEN_ID (EStdAcpiTableIdFadt) ==
+ AcpiTableInfo[Idx].TableGeneratorId)
+ {
+ Status = BuildAndInstallAcpiTable (
+ TableFactoryProtocol,
+ CfgMgrProtocol,
+ AcpiTableProtocol,
+ &AcpiTableInfo[Idx]
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: Failed to find build and install ACPI FADT Table." \
+ " Status = %r\n",
+ Status
+ ));
+ return Status;
+ }
- break;
- }
- } // for
+ break;
+ }
+ } // for
+ }
// Add remaining ACPI Tables
for (Idx = 0; Idx < AcpiTableCount; Idx++) {
diff --git
a/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/DynamicTableManagerDxe.inf
b/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/DynamicTableManagerDxe.inf
index 028c3d413cf8..5ca98c8b4895 100644
--- a/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/DynamicTableManagerDxe.inf
+++ b/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/DynamicTableManagerDxe.inf
@@ -36,6 +36,7 @@ [LibraryClasses]
[Protocols]
gEfiAcpiTableProtocolGuid # PROTOCOL ALWAYS_CONSUMED
+ gEfiAcpiSdtProtocolGuid # PROTOCOL ALWAYS_CONSUMED
gEdkiiConfigurationManagerProtocolGuid # PROTOCOL ALWAYS_CONSUMED
gEdkiiDynamicTableFactoryProtocolGuid # PROTOCOL ALWAYS_CONSUMED
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#91939): https://edk2.groups.io/g/devel/message/91939
Mute This Topic: https://groups.io/mt/92664648/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
