From: Pierre Gondois <pierre.gond...@arm.com>
In an effort to clean the documentation of the above
package, remove duplicated words.
Cc: Leif Lindholm <quic_llind...@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianoc...@kernel.org>
Cc: Abner Chang <abner.ch...@amd.com>
Signed-off-by: Pierre Gondois <pierre.gond...@arm.com>
---
EmbeddedPkg/GdbStub/SerialIo.c | 2 +-
EmbeddedPkg/Include/Library/GdbSerialLib.h | 2 +-
EmbeddedPkg/Include/Library/RealTimeClockLib.h | 2 +-
.../Library/GdbSerialDebugPortLib/GdbSerialDebugPortLib.c | 2 +-
EmbeddedPkg/Library/GdbSerialLib/GdbSerialLib.c | 2 +-
EmbeddedPkg/Library/TemplateRealTimeClockLib/RealTimeClockLib.c | 2 +-
.../Library/VirtualRealTimeClockLib/VirtualRealTimeClockLib.c | 2 +-
EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClock.c | 2 +-
8 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/EmbeddedPkg/GdbStub/SerialIo.c b/EmbeddedPkg/GdbStub/SerialIo.c
index 9970ab687e4b..98ea611e8b04 100644
--- a/EmbeddedPkg/GdbStub/SerialIo.c
+++ b/EmbeddedPkg/GdbStub/SerialIo.c
@@ -283,7 +283,7 @@ GdbSerialReset (
data buts, and stop bits on a serial device.
@param This Protocol instance pointer.
- @param BaudRate The requested baud rate. A BaudRate value of 0 will
use the the
+ @param BaudRate The requested baud rate. A BaudRate value of 0 will
use the
device's default interface speed.
@param ReceiveFifoDepth The requested depth of the FIFO on the receive side
of the
serial interface. A ReceiveFifoDepth value of 0
will use
diff --git a/EmbeddedPkg/Include/Library/GdbSerialLib.h
b/EmbeddedPkg/Include/Library/GdbSerialLib.h
index 4845d6018cfe..58c3a5643c92 100644
--- a/EmbeddedPkg/Include/Library/GdbSerialLib.h
+++ b/EmbeddedPkg/Include/Library/GdbSerialLib.h
@@ -15,7 +15,7 @@
data buts, and stop bits on a serial device. This call is optional as the
serial
port will be set up with defaults base on PCD values.
- @param BaudRate The requested baud rate. A BaudRate value of 0 will
use the the
+ @param BaudRate The requested baud rate. A BaudRate value of 0 will
use the
device's default interface speed.
@param Parity The type of parity to use on this serial device. A
Parity value of
DefaultParity will use the device's default parity
value.
diff --git a/EmbeddedPkg/Include/Library/RealTimeClockLib.h
b/EmbeddedPkg/Include/Library/RealTimeClockLib.h
index 9cc26c40a89d..ff45e26d6cfc 100644
--- a/EmbeddedPkg/Include/Library/RealTimeClockLib.h
+++ b/EmbeddedPkg/Include/Library/RealTimeClockLib.h
@@ -39,7 +39,7 @@ LibGetTime (
@retval EFI_SUCCESS The operation completed successfully.
@retval EFI_INVALID_PARAMETER A time field is out of range.
- @retval EFI_DEVICE_ERROR The time could not be set due due to hardware
error.
+ @retval EFI_DEVICE_ERROR The time could not be set due to hardware
error.
**/
EFI_STATUS
diff --git a/EmbeddedPkg/Library/GdbSerialDebugPortLib/GdbSerialDebugPortLib.c
b/EmbeddedPkg/Library/GdbSerialDebugPortLib/GdbSerialDebugPortLib.c
index d53a5fe47f18..334eb77607dd 100644
--- a/EmbeddedPkg/Library/GdbSerialDebugPortLib/GdbSerialDebugPortLib.c
+++ b/EmbeddedPkg/Library/GdbSerialDebugPortLib/GdbSerialDebugPortLib.c
@@ -51,7 +51,7 @@ GdbSerialLibDebugPortConstructor (
data buts, and stop bits on a serial device. This call is optional as the
serial
port will be set up with defaults base on PCD values.
- @param BaudRate The requested baud rate. A BaudRate value of 0 will
use the the
+ @param BaudRate The requested baud rate. A BaudRate value of 0 will
use the
device's default interface speed.
@param Parity The type of parity to use on this serial device. A
Parity value of
DefaultParity will use the device's default parity
value.
diff --git a/EmbeddedPkg/Library/GdbSerialLib/GdbSerialLib.c
b/EmbeddedPkg/Library/GdbSerialLib/GdbSerialLib.c
index 75e00773ec7d..dea05c344042 100644
--- a/EmbeddedPkg/Library/GdbSerialLib/GdbSerialLib.c
+++ b/EmbeddedPkg/Library/GdbSerialLib/GdbSerialLib.c
@@ -78,7 +78,7 @@ GdbSerialLibConstructor (
data buts, and stop bits on a serial device. This call is optional as the
serial
port will be set up with defaults base on PCD values.
- @param BaudRate The requested baud rate. A BaudRate value of 0 will
use the the
+ @param BaudRate The requested baud rate. A BaudRate value of 0 will
use the
device's default interface speed.
@param Parity The type of parity to use on this serial device. A
Parity value of
DefaultParity will use the device's default parity
value.
diff --git a/EmbeddedPkg/Library/TemplateRealTimeClockLib/RealTimeClockLib.c
b/EmbeddedPkg/Library/TemplateRealTimeClockLib/RealTimeClockLib.c
index 7e8aaf28f6c9..cb5025914e3f 100644
--- a/EmbeddedPkg/Library/TemplateRealTimeClockLib/RealTimeClockLib.c
+++ b/EmbeddedPkg/Library/TemplateRealTimeClockLib/RealTimeClockLib.c
@@ -48,7 +48,7 @@ LibGetTime (
@retval EFI_SUCCESS The operation completed successfully.
@retval EFI_INVALID_PARAMETER A time field is out of range.
- @retval EFI_DEVICE_ERROR The time could not be set due due to hardware
error.
+ @retval EFI_DEVICE_ERROR The time could not be set due to hardware
error.
**/
EFI_STATUS
diff --git
a/EmbeddedPkg/Library/VirtualRealTimeClockLib/VirtualRealTimeClockLib.c
b/EmbeddedPkg/Library/VirtualRealTimeClockLib/VirtualRealTimeClockLib.c
index fe963a315ae7..685e590980ec 100644
--- a/EmbeddedPkg/Library/VirtualRealTimeClockLib/VirtualRealTimeClockLib.c
+++ b/EmbeddedPkg/Library/VirtualRealTimeClockLib/VirtualRealTimeClockLib.c
@@ -233,7 +233,7 @@ LibGetTime (
@retval EFI_SUCCESS The operation completed successfully.
@retval EFI_INVALID_PARAMETER A time field is out of range.
- @retval EFI_DEVICE_ERROR The time could not be set due due to hardware
error.
+ @retval EFI_DEVICE_ERROR The time could not be set due to hardware
error.
**/
EFI_STATUS
diff --git a/EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClock.c
b/EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClock.c
index 308e8cfca4bb..7adb7324057e 100644
--- a/EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClock.c
+++ b/EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClock.c
@@ -74,7 +74,7 @@ GetTime (
@retval EFI_SUCCESS The operation completed successfully.
@retval EFI_INVALID_PARAMETER A time field is out of range.
- @retval EFI_DEVICE_ERROR The time could not be set due due to hardware
error.
+ @retval EFI_DEVICE_ERROR The time could not be set due to hardware
error.
**/
EFI_STATUS
--
2.25.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#92690): https://edk2.groups.io/g/devel/message/92690
Mute This Topic: https://groups.io/mt/93207391/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
