Hi Nickle,
I would like to discuss that DisableBootstrapControl flag and how it is used in
our implementation.
According to Redfish HI specification we can use this flag to disable
credential bootstrapping control.
It can be disabled permanently or till next reboot of the host or service. That
depend on the EnableAfterReset setting on BMC side:
CredentialBootstrapping (v1.3+)
{ object The credential bootstrapping settings for this interface.
EnableAfterReset (v1.3+) Boolean read-write (null) An indication of
whether credential bootstrapping is enabled after a reset for this interface.
Enabled (v1.3+) Boolean read-write (null) An indication of whether
credential bootstrapping is enabled for this interface.
RoleId (v1.3+) string read-write The role used for the bootstrap
account created for this interface.
}
So, if EnableAfterReset set to false, that means BMC will response with 0x80
error and will not return any credentials after reboot. And BIOS BMC
communication will fail.
Another concern with disabling credential bootstrapping control is that we do
it on Exit Boot event before passing a control to OS.
But OS may also need to communicate to BMC through Redfish Host Interface to
post some information. And it will be blocked by our IPMI call.
We create that SMBIOS Type 42 table with Redfish Host Interface settings which
can be used by OS to communicate with BMC. But without the credentials it will
not be possible.
Another question is AuthMethod parameter you initialize in this library:
*AuthMethod = AuthMethodHttpBasic;
According to Redfish HI specification 3 methods may be used - No Auth, Basic
Auth and Session Auth.
Basic Auth and Session Auth methods are required the credentials to be used by
BIOS. And both of them should be supported by BMC.
And your high level function RedfishCreateLibredfishService also supports of
creation Basic or Session Auth service.
I'm not sure why low level library which is created to get credentials from BMC
should decide what Authentication method should be used?
Should it be configured with some PCD? Maybe user may select in Setup what
method should be used? Or it could be build time configuration?
Thank you,
Igor
-----Original Message-----
From: Nickle Wang <nick...@nvidia.com>
Sent: Tuesday, October 25, 2022 4:24 AM
To: devel@edk2.groups.io; abner.ch...@amd.com
Cc: Nick Ramirez <nrami...@nvidia.com>; Igor Kulchytskyy <ig...@ami.com>
Subject: [EXTERNAL] RE: [edk2-devel] [PATCH]
RedfishPkg/RedfishPlatformCredentialLib: IPMI implementation
**CAUTION: The e-mail below is from an external source. Please exercise caution
before opening attachments, clicking links, or following guidance.**
Thanks for your review comments, Abner! I will update new version patch later.
The CI build error will be handled together.
> please add Igor as reviewer too
Sure!
> + *UserId = AllocateZeroPool (sizeof (CHAR8) * USERNAME_MAX_SIZE); if
[Chang, Abner]
Allocation memory with the size (USERNAME_MAX_LENGTH + 1) for both
BootUsername and BootstrapPassword? Because the maximum number of characters
defined in the spec is USERNAME_MAX_LENGTH for the user/password.
Yes, the additional one byte is for NULL terminator. USERNAME_MAX_LENGTH is
defined as 16 and follow host interface specification.
Regards,
Nickle
-----Original Message-----
From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Chang, Abner via
groups.io
Sent: Saturday, October 22, 2022 3:01 PM
To: Nickle Wang <nick...@nvidia.com>; devel@edk2.groups.io
Cc: Nick Ramirez <nrami...@nvidia.com>; Igor Kulchytskyy <ig...@ami.com>
Subject: Re: [edk2-devel] [PATCH] RedfishPkg/RedfishPlatformCredentialLib: IPMI
implementation
External email: Use caution opening links or attachments
[AMD Official Use Only - General]
Hi Nickle, please add Igor as reviewer too. My comments is in below,
> -----Original Message-----
> From: Nickle Wang <nick...@nvidia.com>
> Sent: Thursday, October 20, 2022 10:55 AM
> To: devel@edk2.groups.io
> Cc: Chang, Abner <abner.ch...@amd.com>; Nick Ramirez
> <nrami...@nvidia.com>
> Subject: [PATCH] RedfishPkg/RedfishPlatformCredentialLib: IPMI
> implementation
>
> Caution: This message originated from an External Source. Use proper
> caution when opening attachments, clicking links, or responding.
>
>
> This library follows Redfish Host Interface specification and use IPMI
> command to get bootstrap account credential(NetFn 2Ch, Command 02h) from BMC.
> RedfishHostInterfaceDxe will use this credential for the following
> communication between BIOS and BMC.
>
> Cc: Abner Chang <abner.ch...@amd.com>
> Cc: Nick Ramirez <nrami...@nvidia.com>
> Signed-off-by: Nickle Wang <nick...@nvidia.com>
> ---
> .../RedfishPlatformCredentialLib.c | 273 ++++++++++++++++++
> .../RedfishPlatformCredentialLib.h | 75 +++++
> .../RedfishPlatformCredentialLib.inf | 37 +++
[Chang, Abner]
Could we name this library RedfishPlatformCredentialIpmi so the naming style is
consistent with RedfishPlatformCredentialNull?
> 3 files changed, 385 insertions(+)
> create mode 100644
> RedfishPkg/Library/RedfishPlatformCredentialLib/RedfishPlatformCredentialLib.
> c
> create mode 100644
> RedfishPkg/Library/RedfishPlatformCredentialLib/RedfishPlatformCredentialLib.
> h
> create mode 100644
> RedfishPkg/Library/RedfishPlatformCredentialLib/RedfishPlatformCredent
> ialLib.i
> nf
>
> diff --git
> a/RedfishPkg/Library/RedfishPlatformCredentialLib/RedfishPlatformCrede
> ntialLi
> b.c
> b/RedfishPkg/Library/RedfishPlatformCredentialLib/RedfishPlatformCrede
> ntialLi
> b.c
> new file mode 100644
> index 0000000000..23a15ab1fa
> --- /dev/null
> +++ b/RedfishPkg/Library/RedfishPlatformCredentialLib/RedfishPlatformC
> +++ re
> +++ dentialLib.c
> @@ -0,0 +1,273 @@
> +/** @file
> +*
> +* Copyright (c) 2022 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
> +*
> +* SPDX-License-Identifier: BSD-2-Clause-Patent
[Chang, Abner]
We can have "@par Revision Reference:" in the file header to point out the
spec.
https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.dmtf.org%2Fsites%2Fdefault%2Ffiles%2Fstandards%2Fdocuments%2FDSP0270_1.3.0.pdf&data=05%7C01%7Cigork%40ami.com%7Cebc4dc0526a34fad9c1108dab662388d%7C27e97857e15f486cb58e86c2b3040f93%7C1%7C1%7C638022830242966537%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=ywFQL6E7TjNtBuos89mYh4TtlUCa4QWd3uEByRsRU8c%3D&reserved=0
> +*
> +**/
> +
> +#include "RedfishPlatformCredentialLib.h"
> +
> +//
> +// Global flag of controlling credential service // BOOLEAN
> +mRedfishServiceStopped = FALSE;
> +
> +/**
> + Notify the Redfish service provide to stop provide configuration
> +service to this
> platform.
> +
> + This function should be called when the platfrom is about to leave
> + the safe
> environment.
> + It will notify the Redfish service provider to abort all logined
> + session, and prohibit further login with original auth info.
> + GetAuthInfo() will return EFI_UNSUPPORTED once this function is returned.
> +
> + @param[in] This Pointer to
> EDKII_REDFISH_CREDENTIAL_PROTOCOL instance.
> + @param[in] ServiceStopType Reason of stopping Redfish service.
> +
> + @retval EFI_SUCCESS Service has been stoped successfully.
> + @retval EFI_INVALID_PARAMETER This is NULL.
> + @retval Others Some error happened.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +LibStopRedfishService (
> + IN EDKII_REDFISH_CREDENTIAL_PROTOCOL *This,
> + IN EDKII_REDFISH_CREDENTIAL_STOP_SERVICE_TYPE ServiceStopType
> + )
> +{
> + EFI_STATUS Status;
> +
> + if ((ServiceStopType <= ServiceStopTypeNone) || (ServiceStopType >=
> ServiceStopTypeMax)) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + //
> + // Raise flag first
> + //
> + mRedfishServiceStopped = TRUE;
> +
> + //
> + // Notify BMC to disable credential bootstrapping support.
> + //
> + Status = GetBootstrapAccountCredentials (TRUE, NULL, NULL); if
> + (EFI_ERROR (Status)) {
> + DEBUG ((DEBUG_ERROR, "%a: fail to disable bootstrap credential:
> + %r\n",
> __FUNCTION__, Status));
> + return Status;
> + }
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Notification of Exit Boot Service.
> +
> + @param[in] This Pointer to EDKII_REDFISH_CREDENTIAL_PROTOCOL.
> +**/
> +VOID
> +EFIAPI
> +LibCredentialExitBootServicesNotify (
> + IN EDKII_REDFISH_CREDENTIAL_PROTOCOL *This
> + )
> +{
> + //
> + // Stop the credential support when system is about to enter OS.
> + //
> + LibStopRedfishService (This, ServiceStopTypeExitBootService); }
> +
> +/**
> + Notification of End of DXe.
> +
> + @param[in] This Pointer to EDKII_REDFISH_CREDENTIAL_PROTOCOL.
> +**/
> +VOID
> +EFIAPI
> +LibCredentialEndOfDxeNotify (
> + IN EDKII_REDFISH_CREDENTIAL_PROTOCOL *This
> + )
> +{
> + //
> + // Do nothing now.
> + // We can stop credential support when system reach end-of-dxe for
> +security
> reason.
> + //
> +}
> +
> +/**
> + Function to retrieve temporary use credentials for the UEFI redfish
> +client
[Chang, Abner]
We miss the functionality to disable bootstrap credential service in the
function description.
> +
> + @param[in] DisableBootstrapControl
> + TRUE - Tell the BMC to disable the
> bootstrap credential
> + service to ensure no one else
> gains credentials
> + FALSE Allow the bootstrap
> + credential service to continue @param[out] BootstrapUsername
> + A pointer to a UTF-8 encoded
> + string for the credential
> username
> + When DisableBootstrapControl is
> + TRUE, this pointer can be NULL
> +
> + @param[out] BootstrapPassword
> + A pointer to a UTF-8 encoded
> + string for the credential
> password
> + When DisableBootstrapControl is
> + TRUE, this pointer can be NULL
> +
> + @retval EFI_SUCCESS Credentials were successfully fetched
> and
> returned
> + @retval EFI_INVALID_PARAMETER BootstrapUsername or
> BootstrapPassword is NULL when DisableBootstrapControl
> + is set to FALSE
> + @retval EFI_DEVICE_ERROR An IPMI failure occurred
[Chang, Abner]
The return status should also include the status of disabling bootstrap
credential.
> +**/
> +EFI_STATUS
> +GetBootstrapAccountCredentials (
> + IN BOOLEAN DisableBootstrapControl,
> + IN OUT CHAR8 *BootstrapUsername, OPTIONAL
> + IN OUT CHAR8 *BootstrapPassword OPTIONAL
> + )
> +{
> + EFI_STATUS Status;
> + IPMI_BOOTSTRAP_CREDENTIALS_COMMAND_DATA CommandData;
> + IPMI_BOOTSTRAP_CREDENTIALS_RESULT_RESPONSE ResponseData;
> + UINT32 ResponseSize;
> +
> + if (!PcdGetBool (PcdIpmiFeatureEnable)) {
> + DEBUG ((DEBUG_ERROR, "%a: IPMI is not enabled! Unable to fetch
> + Redfish
> credentials\n", __FUNCTION__));
> + return EFI_UNSUPPORTED;
> + }
> +
> + //
> + // NULL buffer check
> + //
> + if (!DisableBootstrapControl && ((BootstrapUsername == NULL) ||
> (BootstrapPassword == NULL))) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + DEBUG ((DEBUG_VERBOSE, "%a: Disable bootstrap control: 0x%x\n",
> + __FUNCTION__, DisableBootstrapControl));
> +
> + //
> + // IPMI callout to NetFn 2C, command 02
> + // Request data:
> + // Byte 1: REDFISH_IPMI_GROUP_EXTENSION
> + // Byte 2: DisableBootstrapControl
> + //
> + CommandData.GroupExtensionId = REDFISH_IPMI_GROUP_EXTENSION;
> + CommandData.DisableBootstrapControl = (DisableBootstrapControl ?
> + REDFISH_IPMI_BOOTSTRAP_CREDENTIAL_DISABLE :
> + REDFISH_IPMI_BOOTSTRAP_CREDENTIAL_ENABLE);
> +
> + ResponseSize = sizeof (ResponseData);
> +
> + //
> + // Response data:
> + // Byte 1 : Completion code
> + // Byte 2 : REDFISH_IPMI_GROUP_EXTENSION
> + // Byte 3-18 : Username
> + // Byte 19-34: Password
> + //
> + Status = IpmiSubmitCommand (
> + IPMI_NETFN_GROUP_EXT,
> + REDFISH_IPMI_GET_BOOTSTRAP_CREDENTIALS_CMD,
> + (UINT8 *)&CommandData,
> + sizeof (CommandData),
> + (UINT8 *)&ResponseData,
> + &ResponseSize
> + );
> +
> + if (EFI_ERROR (Status)) {
> + DEBUG ((DEBUG_ERROR, "%a: IPMI transaction failure. Returning\n",
> __FUNCTION__));
> + ASSERT_EFI_ERROR (Status);
> + return Status;
> + } else {
> + if (ResponseData.CompletionCode != IPMI_COMP_CODE_NORMAL) {
> + if (ResponseData.CompletionCode ==
> REDFISH_IPMI_COMP_CODE_BOOTSTRAP_CREDENTIAL_DISABLED) {
> + DEBUG ((DEBUG_ERROR, "%a: bootstrap credential support was
> disabled\n", __FUNCTION__));
> + return EFI_ACCESS_DENIED;
> + }
> +
> + DEBUG ((DEBUG_ERROR, "%a: Completion code = 0x%x. Returning\n",
> __FUNCTION__, ResponseData.CompletionCode));
> + return EFI_PROTOCOL_ERROR;
> + } else if (ResponseData.GroupExtensionId !=
> REDFISH_IPMI_GROUP_EXTENSION) {
> + DEBUG ((DEBUG_ERROR, "%a: Group Extension Response = 0x%x.
> Returning\n", __FUNCTION__, ResponseData.GroupExtensionId));
> + return EFI_DEVICE_ERROR;
> + } else {
> + if (BootstrapUsername != NULL) {
> + CopyMem (BootstrapUsername, ResponseData.Username,
> USERNAME_MAX_LENGTH);
> + //
> + // Manually append null-terminator in case 16 characters
> + username
> returned.
> + //
> + BootstrapUsername[USERNAME_MAX_LENGTH] = '\0';
> + }
> +
> + if (BootstrapPassword != NULL) {
> + CopyMem (BootstrapPassword, ResponseData.Password,
> PASSWORD_MAX_LENGTH);
> + //
> + // Manually append null-terminator in case 16 characters
> + password
> returned.
> + //
> + BootstrapPassword[PASSWORD_MAX_LENGTH] = '\0';
> + }
> + }
> + }
> +
> + return Status;
> +}
> +
> +/**
> + Retrieve platform's Redfish authentication information.
> +
> + This functions returns the Redfish authentication method together
> + with the user Id and password.
> + - For AuthMethodNone, the UserId and Password could be used for
> + HTTP
> header authentication
> + as defined by RFC7235.
> + - For AuthMethodRedfishSession, the UserId and Password could be
> + used for
> Redfish
> + session login as defined by Redfish API specification (DSP0266).
> +
> + Callers are responsible for and freeing the returned string storage.
> +
> + @param[in] This Pointer to
> EDKII_REDFISH_CREDENTIAL_PROTOCOL instance.
> + @param[out] AuthMethod Type of Redfish authentication method.
> + @param[out] UserId The pointer to store the returned UserId
> string.
> + @param[out] Password The pointer to store the returned Password
> string.
> +
> + @retval EFI_SUCCESS Get the authentication information
> successfully.
> + @retval EFI_ACCESS_DENIED SecureBoot is disabled after EndOfDxe.
> + @retval EFI_INVALID_PARAMETER This or AuthMethod or UserId or
> Password is NULL.
> + @retval EFI_OUT_OF_RESOURCES There are not enough memory resources.
> + @retval EFI_UNSUPPORTED Unsupported authentication method is
> found.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +LibCredentialGetAuthInfo (
> + IN EDKII_REDFISH_CREDENTIAL_PROTOCOL *This,
> + OUT EDKII_REDFISH_AUTH_METHOD *AuthMethod,
> + OUT CHAR8 **UserId,
> + OUT CHAR8 **Password
> + )
> +{
> + EFI_STATUS Status;
> +
> + if ((AuthMethod == NULL) || (UserId == NULL) || (Password == NULL)) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + *UserId = NULL;
> + *Password = NULL;
> +
> + if (mRedfishServiceStopped) {
> + DEBUG ((DEBUG_ERROR, "%a: credential service is stopped due to
> + security
> reason\n", __FUNCTION__));
> + return EFI_ACCESS_DENIED;
> + }
> +
> + *AuthMethod = AuthMethodHttpBasic;
> +
> + *UserId = AllocateZeroPool (sizeof (CHAR8) * USERNAME_MAX_SIZE); if
[Chang, Abner]
Allocation memory with the size (USERNAME_MAX_LENGTH + 1) for both
BootUsername and BootstrapPassword? Because the maximum number of characters
defined in the spec is USERNAME_MAX_LENGTH for the user/password.
> + (*UserId == NULL) {
> + return EFI_OUT_OF_RESOURCES;
> + }
> +
> + *Password = AllocateZeroPool (sizeof (CHAR8) * PASSWORD_MAX_SIZE);
> + if (*Password == NULL) {
> + return EFI_OUT_OF_RESOURCES;
> + }
> +
> + Status = GetBootstrapAccountCredentials (FALSE, *UserId,
> + *Password); if (EFI_ERROR (Status)) {
> + DEBUG ((DEBUG_ERROR, "%a: fail to get bootstrap credential:
> + %r\n",
> __FUNCTION__, Status));
> + return Status;
> + }
> +
> + return EFI_SUCCESS;
> +}
> diff --git
> a/RedfishPkg/Library/RedfishPlatformCredentialLib/RedfishPlatformCrede
> ntialLi
> b.h
> b/RedfishPkg/Library/RedfishPlatformCredentialLib/RedfishPlatformCrede
> ntialLi
> b.h
> new file mode 100644
> index 0000000000..5b448e01be
> --- /dev/null
> +++ b/RedfishPkg/Library/RedfishPlatformCredentialLib/RedfishPlatformC
> +++ re
> +++ dentialLib.h
> @@ -0,0 +1,75 @@
> +/** @file
> +*
> +* Copyright (c) 2022 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
> +*
> +* SPDX-License-Identifier: BSD-2-Clause-Patent
> +*
> +**/
> +#include <Uefi.h>
> +#include <IndustryStandard/Ipmi.h>
> +#include <Protocol/EdkIIRedfishCredential.h>
> +#include <Library/BaseLib.h>
> +#include <Library/BaseMemoryLib.h>
> +#include <Library/DebugLib.h>
> +#include <Library/IpmiBaseLib.h>
> +#include <Library/MemoryAllocationLib.h> #include
> +<Library/RedfishCredentialLib.h>
> +
> +#define REDFISH_IPMI_GROUP_EXTENSION 0x52
> +#define REDFISH_IPMI_GET_BOOTSTRAP_CREDENTIALS_CMD 0x02
> +#define REDFISH_IPMI_BOOTSTRAP_CREDENTIAL_ENABLE 0xA5
> +#define REDFISH_IPMI_BOOTSTRAP_CREDENTIAL_DISABLE 0x00
> +#define REDFISH_IPMI_COMP_CODE_BOOTSTRAP_CREDENTIAL_DISABLED
> 0x80
> +
> +//
> +// Per Redfish Host Interface Specification 1.3, The maximum lenght
> +of // username and password is 16 characters long.
> +//
> +#define USERNAME_MAX_LENGTH 16
> +#define PASSWORD_MAX_LENGTH 16
> +#define USERNAME_MAX_SIZE (USERNAME_MAX_LENGTH + 1) // NULL
> terminator
> +#define PASSWORD_MAX_SIZE (PASSWORD_MAX_LENGTH + 1) // NULL
> terminator
> +
> +#pragma pack(1)
> +///
> +/// The definition of IPMI command to get bootstrap account
> +credentials /// typedef struct {
> + UINT8 GroupExtensionId;
> + UINT8 DisableBootstrapControl;
> +} IPMI_BOOTSTRAP_CREDENTIALS_COMMAND_DATA;
> +
> +///
> +/// The response data of getting bootstrap credential /// typedef
> +struct {
> + UINT8 CompletionCode;
> + UINT8 GroupExtensionId;
> + CHAR8 Username[USERNAME_MAX_LENGTH];
> + CHAR8 Password[PASSWORD_MAX_LENGTH];
> +} IPMI_BOOTSTRAP_CREDENTIALS_RESULT_RESPONSE;
> +
> +#pragma pack()
> +
> +/**
> + Function to retrieve temporary use credentials for the UEFI redfish
> +client
[Chang, Abner]
We miss the functionality to disable bootstrap credential service in the
function description.
> +
> + @param[in] DisableBootstrapControl
> + TRUE - Tell the BMC to disable the
> bootstrap credential
> + service to ensure no one else
> gains credentials
> + FALSE Allow the bootstrap
> + credential service to continue @param[out] BootstrapUsername
> + A pointer to a UTF-8 encoded
> + string for the credential username
> +
> + @param[out] BootstrapPassword
> + A pointer to a UTF-8 encoded
> + string for the credential password
> +
> + @retval EFI_SUCCESS Credentials were successfully fetched
> and
> returned
[Chang, Abner]
Or the bootstrap credential service is disabled successfully, right?
> + @retval EFI_DEVICE_ERROR An IPMI failure occurred
> +**/
> +EFI_STATUS
> +GetBootstrapAccountCredentials (
> + IN BOOLEAN DisableBootstrapControl,
> + IN OUT CHAR8 *BootstrapUsername,
> + IN OUT CHAR8 *BootstrapPassword
> + );
> diff --git
> a/RedfishPkg/Library/RedfishPlatformCredentialLib/RedfishPlatformCrede
> ntialLi
> b.inf
> b/RedfishPkg/Library/RedfishPlatformCredentialLib/RedfishPlatformCrede
> ntialLi
> b.inf
> new file mode 100644
> index 0000000000..a990d28363
> --- /dev/null
> +++ b/RedfishPkg/Library/RedfishPlatformCredentialLib/RedfishPlatformC
> +++ re
> +++ dentialLib.inf
> @@ -0,0 +1,37 @@
> +## @file
> +#
> +# Copyright (c) 2022 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent # ##
> +
> +[Defines]
> + INF_VERSION = 0x0001000b
> + BASE_NAME = RedfishPlatformCredentialLib
> + FILE_GUID = 9C45D622-4C66-417F-814C-F76246D97233
> + MODULE_TYPE = DXE_DRIVER
> + VERSION_STRING = 1.0
> + LIBRARY_CLASS = RedfishPlatformCredentialLib
> +
> +[Sources]
> + RedfishPlatformCredentialLib.c
> +
> +[Packages]
> + MdePkg/MdePkg.dec
> + MdeModulePkg/MdeModulePkg.dec
> + RedfishPkg/RedfishPkg.dec
> + IpmiFeaturePkg/IpmiFeaturePkg.dec
[Chang, Abner]
Could you please add a comment to the reference of IpmiFeaturePkg? We have to
give customers a notice that the dependence of
"edk2-platforms/Features/Intel/OutOfBandManagement/". They have to add the path
to PACKAGES_PATH. You also have to skip this dependence in the RedfishPkg.yaml
to avoid the CI error.
Another thing is I propose to move out IpmiFeaturePkg from
edk2-platforms/Features/Intel/OutOfBandManagement to
edk2-platforms/Features/ManageabilityPkg that also provides the implementation
of PLDM/MCTP/IPMI/KCS. I had an initial talk with IpmiFeaturePkg owner and get
the positive response on this proposal. I will kick off the discussion on the
dev mailing list. That is to say this module may need a little bit change
later, however that is good to me having this implementation now.
Thanks
Abner
> +
> +[LibraryClasses]
> + UefiLib
> + DebugLib
> + IpmiBaseLib
> + MemoryAllocationLib
> + BaseMemoryLib
> +
> +[Pcd]
> + gIpmiFeaturePkgTokenSpaceGuid.PcdIpmiFeatureEnable
> +
> +[Depex]
> + TRUE
> --
> 2.17.1
-The information contained in this message may be confidential and proprietary
to American Megatrends (AMI). This communication is intended to be read only by
the individual or entity to whom it is addressed or by their designee. If the
reader of this message is not the intended recipient, you are on notice that
any distribution of this message, in any form, is strictly prohibited. Please
promptly notify the sender by reply e-mail or by telephone at 770-246-8600, and
then delete or destroy all copies of the transmission.
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#95615): https://edk2.groups.io/g/devel/message/95615
Mute This Topic: https://groups.io/mt/94446537/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
