On 9/1/22 23:24, RichardHo [何明忠] via groups.io wrote:
+ DataLength = (UINTN)(Cpb->DataLen + (UINT32)Cpb->MediaheaderLen);
+
+ while (1) {
+ if (Counter >= 3) {
+ StatCode = PXE_STATCODE_BUSY;
+ break;
+ }
+
+ Status = Nic->UsbEth->UsbEthTransmit (Cdb, Nic->UsbEth, (VOID
*)(UINTN)BulkOutData, &DataLength);
+ if (EFI_ERROR (Status)) {
+ StatCode = PXE_STATFLAGS_COMMAND_FAILED;
+ }
+
+ if (Status == EFI_INVALID_PARAMETER) {
+ StatCode = PXE_STATCODE_INVALID_PARAMETER;
+ break;
+ }
+
+ if (Status == EFI_DEVICE_ERROR) {
+ StatCode = PXE_STATCODE_DEVICE_FAILURE;
+ break;
+ }
+
+ if (!EFI_ERROR (Status)) {
+ Nic->TxFrame++;
+ StatCode = PXE_STATCODE_SUCCESS;
+ break;
+ }
+
+ Counter++;
+ }
You need to set DataLength inside the while loop, otherwise on
subsequent iterations DataLength will be whatever value UsbEthTransmit
just set it to, which will likely be 0 since an error occurred.
--
Rebecca Cran
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#96935): https://edk2.groups.io/g/devel/message/96935
Mute This Topic: https://groups.io/mt/93121092/21656
Group Owner: [email protected]
Unsubscribe: https://edk2.groups.io/g/devel/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
