Reviewed-by: Hao A Wu <hao.a...@intel.com>

Best Regards,
Hao Wu

> -----Original Message-----
> From: Zhu, Weipu <weipu....@intel.com>
> Sent: Thursday, February 2, 2023 2:42 PM
> To: devel@edk2.groups.io
> Cc: Zhu, Weipu <weipu....@intel.com>; Wu, Hao A <hao.a...@intel.com>;
> Kinney, Michael D <michael.d.kin...@intel.com>; Gao, Liming
> <gaolim...@byosoft.com.cn>; Liu, Zhiguang <zhiguang....@intel.com>
> Subject: [PATCH v2 1/2] MdePkg: Add RPMB related commands and DCB
> definition for NVMe
> 
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4303
> 
> 
> 
> Add RPMB(Replay Protected Memory Block) access commands,
> 
> result and DCB(Device Configuration Block) definition for
> 
> NVMe according to the NVMe spec 2.0.
> 
> 
> 
> Signed-off-by: Weipu Zhu <weipu....@intel.com>
> 
> Cc: Hao Wu <hao.a...@intel.com>
> 
> Cc: Michael D Kinney <michael.d.kin...@intel.com>
> 
> Cc: Liming Gao <gaolim...@byosoft.com.cn>
> 
> Cc: Zhiguang Liu <zhiguang....@intel.com>
> 
> ---
> 
>  MdePkg/Include/IndustryStandard/Nvme.h | 46
> +++++++++++++++++++++++++-
> 
>  1 file changed, 45 insertions(+), 1 deletion(-)
> 
> 
> 
> diff --git a/MdePkg/Include/IndustryStandard/Nvme.h
> b/MdePkg/Include/IndustryStandard/Nvme.h
> 
> index 4a1d92c45d..3b4e9fe67c 100644
> 
> --- a/MdePkg/Include/IndustryStandard/Nvme.h
> 
> +++ b/MdePkg/Include/IndustryStandard/Nvme.h
> 
> @@ -2,12 +2,13 @@
> 
>    Definitions based on NVMe spec. version 1.1.
> 
> 
> 
>    (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>
> 
> -  Copyright (c) 2017 - 2021, Intel Corporation. All rights reserved.<BR>
> 
> +  Copyright (c) 2017 - 2023, Intel Corporation. All rights reserved.<BR>
> 
>    SPDX-License-Identifier: BSD-2-Clause-Patent
> 
> 
> 
>    @par Specification Reference:
> 
>    NVMe Specification 1.1
> 
>    NVMe Specification 1.4
> 
> +  NVMe Specification 2.0
> 
> 
> 
>  **/
> 
> 
> 
> @@ -502,6 +503,49 @@ typedef struct {
> 
>    // UINT8    *Data;                         /* Data to be written or read 
> by signed
> access where M = 512 * Sector Count. */
> 
>  } NVME_RPMB_DATA_FRAME;
> 
> 
> 
> +//
> 
> +// RPMB Device Configuration Block Data Structure.
> 
> +// (ref. NVMe Base spec. v2.0 Figure 460).
> 
> +//
> 
> +typedef struct {
> 
> +  UINT8    BPPEnable;     /* Boot Partition Protection Enabled */
> 
> +  UINT8    BPLock;        /* Boot Partition Lock */
> 
> +  UINT8    NameSpaceWrP;  /* Namespace Write Protection */
> 
> +  UINT8    Rsvd1[509];    /* Reserved as of Nvm Express 2.0 Spec */
> 
> +} NVME_RPMB_DCB;
> 
> +
> 
> +//
> 
> +// RPMB Request and Response Message Types.
> 
> +// (ref. NVMe Base spec. v2.0 Figure 461).
> 
> +//
> 
> +#define NVME_RPMB_AUTHKEY_PROGRAM           0x0001
> 
> +#define NVME_RPMB_COUNTER_READ              0x0002
> 
> +#define NVME_RPMB_AUTHDATA_WRITE            0x0003
> 
> +#define NVME_RPMB_AUTHDATA_READ             0x0004
> 
> +#define NVME_RPMB_RESULT_READ               0x0005
> 
> +#define NVME_RPMB_DCB_WRITE                 0x0006
> 
> +#define NVME_RPMB_DCB_READ                  0x0007
> 
> +#define NVME_RPMB_AUTHKEY_PROGRAM_RESPONSE  0x0100
> 
> +#define NVME_RPMB_COUNTER_READ_RESPONSE     0x0200
> 
> +#define NVME_RPMB_AUTHDATA_WRITE_RESPONSE   0x0300
> 
> +#define NVME_RPMB_AUTHDATA_READ_RESPONSE    0x0400
> 
> +#define NVME_RPMB_DCB_WRITE_RESPONSE        0x0600
> 
> +#define NVME_RPMB_DCB_READ_RESPONSE         0x0700
> 
> +
> 
> +//
> 
> +// RPMB Operation Result.
> 
> +// (ref. NVMe Base spec. v2.0 Figure 462).
> 
> +//
> 
> +#define NVME_RPMB_RESULT_SUCCESS                 0x00
> 
> +#define NVME_RPMB_RESULT_GENERAL_FAILURE         0x01
> 
> +#define NVME_RPMB_RESULT_AHTHENTICATION_FAILURE  0x02
> 
> +#define NVME_RPMB_RESULT_COUNTER_FAILURE         0x03
> 
> +#define NVME_RPMB_RESULT_ADDRESS_FAILURE         0x04
> 
> +#define NVME_RPMB_RESULT_WRITE_FAILURE           0x05
> 
> +#define NVME_RPMB_RESULT_READ_FAILURE            0x06
> 
> +#define NVME_RPMB_RESULT_AUTHKEY_NOT_PROGRAMMED  0x07
> 
> +#define NVME_RPMB_RESULT_INVALID_DCB             0x08
> 
> +
> 
>  //
> 
>  // NvmExpress Admin Identify Cmd
> 
>  //
> 
> --
> 
> 2.37.1.windows.1
> 
> 



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#99651): https://edk2.groups.io/g/devel/message/99651
Mute This Topic: https://groups.io/mt/96695512/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-


Reply via email to