Hi Ritul

It might be easier to build it inside coreboot; that'll use coreboots tool
chain and Kconfig so everything will just work.

I.e. CONFIG_PAYLOAD_EDK2=y

Sean

On Tue, 7 Feb 2023, 18:24 ritul guru, <ritul.b...@gmail.com> wrote:

> UefiPayloadPkg/UefiPayloadPkg.fdf
> DEFINE FD_BASE       = 0x00800000
>
> Is the above address correct in uefipaylaod?
> As observing some regions are getting out of limit of FD limit,
>
> and when setting DEFINE FD_BASE       = 0x02200000, then seeing assert in
> [gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister].
>
>
>
>
>
>
> *Thanks & RegardsRitul Guru+91-9916513186*
>
>
> On Tue, Feb 7, 2023 at 8:29 PM ritul guru <ritul.b...@gmail.com> wrote:
>
>> Hi,
>> I am building edk2 payload and getting below warning for
>> PcdRtcIndexRegister,
>> and if try to boot to then observing that there is assert at:
>>
>> ASSERT_EFI_ERROR (Status = Device Error)
>>
>> DXE_ASSERT!:
>> /home/amd/src///coreboot/payloads/external/tianocore/tianocore/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c
>> (141): !EFI_ERROR (Status)
>>
>>
>>
>>
>> build time warning:
>> Active Platform          =
>> /home//src///coreboot/payloads/external/edk2/workspace/tianocore/UefiPayloadPkg/UefiPayloadPkg.dsc
>> .build: : warning: The PCD was not specified by any INF module in the
>> platform for the given architecture.
>>         PCD: [gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister]
>>         Platform: [UefiPayloadPkg.dsc]
>>         Arch: ['IA32']
>> build: : warning: The PCD was not specified by any INF module in the
>> platform for the given architecture.
>>         PCD: [gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister]
>>         Platform: [UefiPayloadPkg.dsc]
>>         Arch: ['IA32']
>> . done!
>>
>>
>>
>>
>> *Thanks & RegardsRitul Guru+91-9916513186*
>>
> 
>


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#99761): https://edk2.groups.io/g/devel/message/99761
Mute This Topic: https://groups.io/mt/96810837/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-


Reply via email to