From: Abner Chang <abner.ch...@amd.com>

BZ #4355
This change adds definitions for DMTF MCTP
base specification.

Signed-off-by: Abner Chang <abner.ch...@amd.com>
Cc: Michael D Kinney <michael.d.kin...@intel.com>
Cc: Liming Gao <gaolim...@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang....@intel.com>
Cc: Nickle Wang <nick...@nvidia.com>
Cc: Igor Kulchytskyy <ig...@ami.com>
Cc: Isaac Oram <isaac.w.o...@intel.com>
Cc: Abdul Lateef Attar <abdullateef.at...@amd.com>
---
 MdePkg/Include/IndustryStandard/Mctp.h | 113 +++++++++++++++++++++++++
 1 file changed, 113 insertions(+)
 create mode 100644 MdePkg/Include/IndustryStandard/Mctp.h

diff --git a/MdePkg/Include/IndustryStandard/Mctp.h 
b/MdePkg/Include/IndustryStandard/Mctp.h
new file mode 100644
index 00000000000..45fa63e0435
--- /dev/null
+++ b/MdePkg/Include/IndustryStandard/Mctp.h
@@ -0,0 +1,113 @@
+/** @file
+
+  The definitions of DMTF Management Component Transport Protocol (MCTP)
+  Base Specification.
+
+  Copyright (C) 2023 Advanced Micro Devices, Inc. All rights reserved.<BR>
+  SPDX-License-Identifier: BSD-2-Clause-Patent
+
+  @par Revision Reference:
+  DMTF Management Component Transport Protocol (MCTP) Base Specification
+  Version 1.3.1
+**/
+
+#ifndef MCTP_H_
+#define MCTP_H_
+
+///
+/// Definitions of endpoint ID
+///
+#define MCTP_NULL_DESTINATION_ENDPOINT_ID  0
+#define MCTP_NULL_SOURCE_ENDPOINT_ID       0
+#define MCTP_RESERVED_ENDPOINT_START_ID    1
+#define MCTP_RESERVED_ENDPOINT_END_ID      7
+#define MCTP_BROADCAST_ENDPOINT_ID         0xFF
+
+// Minimum transmission size is 64 bytes.
+#define MCTP_BASELINE_MINIMUM_UNIT_TRANSMISSION_SIZE  0x40
+
+///
+/// The 32-bit Header of MCTP packet.
+///
+typedef union {
+  struct {
+    UINT8    Reserved              : 4; ///< Reserved for future definitions.
+    UINT8    HeaderVersion         : 4; ///< The version of header.
+    UINT8    DestinationEndpointId : 8; ///< Destination endpoint Id (EID).
+    UINT8    SourceEndpointId      : 8; ///< Source endpoint Id (EID)
+    UINT8    StartOfMessage        : 1; ///< Indicates the first packet of 
message.
+    UINT8    EndOfMessage          : 1; ///< Indicates the last packet of 
message.
+    UINT8    PacketSequence        : 2; ///< Sequence number increments modulo 
4 on
+                                        ///< each packet.
+    UINT8    TagOwner              : 1; ///< Tag owner identifies the message 
was
+                                        ///< originated by the source EID or
+                                        ///< destination EID.
+    UINT8    MessageTag            : 3; ///< Check the MCTP Base specification 
for the
+                                        ///< usages.
+  } Bits;
+  UINT32    Header;
+} MCTP_HEADER;
+
+///
+/// MCTP Control Commands
+///
+#define   MCTP_CONTROL_RESERVED                            0x00
+#define   MCTP_CONTROL_SET_ENDPOINT_ID                     0x01
+#define   MCTP_CONTROL_GET_ENDPOINT_ID                     0x02
+#define   MCTP_CONTROL_GET_ENDPOINT_UUID                   0x03
+#define   MCTP_CONTROL_GET_MCTP_VERSION_SUPPORT            0x04
+#define   MCTP_CONTROL_GET_MESSAGE_TYPE_SUPPORT            0x05
+#define   MCTP_CONTROL_GET_VENDOR_DEFINED_MESSAGE_SUPPORT  0x06
+#define   MCTP_CONTROL_RESOLVE_ENDPOINT_ID                 0x07
+#define   MCTP_CONTROL_ALLOCATE_ENDPOINT_IDS               0x08
+#define   MCTP_CONTROL_ROUTING_INFORMATION_UPDATE          0x09
+#define   MCTP_CONTROL_GET_ROUTINE_TABLE_ENTRIES           0x0A
+#define   MCTP_CONTROL_PREPARE_FOR_ENDPOINT_DISCOVERY      0x0B
+#define   MCTP_CONTROL_ENDPOINT_DISCOVERY                  0x0C
+#define   MCTP_CONTROL_DISCOVERY_NOTIFY                    0x0D
+#define   MCTP_CONTROL_GET_NETWORK_ID                      0x0E
+#define   MCTP_CONTROL_QUERY_HOP                           0x0F
+#define   MCTP_CONTROL_RESOLVE_UUID                        0x10
+#define   MCTP_CONTROL_QUERY_RATE_LIMIT                    0x11
+#define   MCTP_CONTROL_REQUEST_TX_RATE_LIMIT               0x12
+#define   MCTP_CONTROL_UPDATE_RATE_LIMIT                   0x13
+#define   MCTP_CONTROL_QUERY_SUPPORTED_INTERFACES          0x14
+#define   MCTP_CONTROL_TRANSPORT_SPECIFIC_START            0xF0
+#define   MCTP_CONTROL_TRANSPORT_SPECIFIC_END              0xFF
+
+///
+/// MCTP Control Message Completion Codes
+///
+#define   MCTP_CONTROL_COMPLETION_CODES_SUCCESS                 0x00
+#define   MCTP_CONTROL_COMPLETION_CODES_ERROR                   0x01
+#define   MCTP_CONTROL_COMPLETION_CODES_ERROR_INVALID_DATA      0x02
+#define   MCTP_CONTROL_COMPLETION_CODES_ERROR_INVALID_LENGTH    0x03
+#define   MCTP_CONTROL_COMPLETION_CODES_ERROR_NOT_READY         0x04
+#define   MCTP_CONTROL_COMPLETION_CODES_ERROR_UNSUPPORTED_CMD   0x05
+#define   MCTP_CONTROL_COMPLETION_CODES_COMMAND_SPECIFIC_START  0x80
+#define   MCTP_CONTROL_COMPLETION_CODES_COMMAND_SPECIFIC_END    0xFF
+
+///
+/// MCTP Control Message Types
+///
+#define   MCTP_MESSAGE_TYPE_CONTROL              0x00
+#define   MCTP_MESSAGE_TYPE_VENDOR_DEFINED_PCI   0x7E
+#define   MCTP_MESSAGE_TYPE_VENDOR_DEFINED_IANA  0x7F
+
+///
+/// MCTP Control Message Format
+///
+typedef struct {
+  struct {
+    UINT8    IntegrityCheck : 1; ///< Message integrity check.
+    UINT8    MessageType    : 7; ///< Message type.
+    UINT8    RequestBit     : 1; ///< Request bit.
+    UINT8    DatagramBit    : 1; ///< Datagram bit.
+    UINT8    Reserved       : 1; ///< Reserved bit.
+    UINT8    InstanceId     : 5; ///< Instance ID.
+    UINT8    CommandCode    : 8; ///< Command code of request message.
+    UINT8    CompletionCode : 8; ///< Completion code in response message.
+  } Bits;
+  UINT32    BodyHeader;
+} MCTP_CONTROL_MESSAGE;
+#endif
-- 
2.37.1.windows.1



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#100652): https://edk2.groups.io/g/devel/message/100652
Mute This Topic: https://groups.io/mt/97354795/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-


Reply via email to