[AMD Official Use Only - General] Hi Mike, MCTP v4 was just sent. Thanks Abner
> -----Original Message----- > From: Kinney, Michael D <michael.d.kin...@intel.com> > Sent: Friday, March 24, 2023 6:24 AM > To: Chang, Abner <abner.ch...@amd.com>; devel@edk2.groups.io > Cc: Gao, Liming <gaolim...@byosoft.com.cn>; Liu, Zhiguang > <zhiguang....@intel.com>; Nickle Wang <nick...@nvidia.com>; Igor > Kulchytskyy <ig...@ami.com>; Oram, Isaac W <isaac.w.o...@intel.com>; > Attar, AbdulLateef (Abdul Lateef) <abdullateef.at...@amd.com>; Kinney, > Michael D <michael.d.kin...@intel.com> > Subject: RE: [PATCH v3] MdePkg/Include: Add DMTF MCTP definitions > > Caution: This message originated from an External Source. Use proper > caution when opening attachments, clicking links, or responding. > > > > -----Original Message----- > > From: abner.ch...@amd.com <abner.ch...@amd.com> > > Sent: Thursday, March 23, 2023 8:05 AM > > To: devel@edk2.groups.io > > Cc: Kinney, Michael D <michael.d.kin...@intel.com>; Gao, Liming > > <gaolim...@byosoft.com.cn>; Liu, Zhiguang <zhiguang....@intel.com>; > > Nickle Wang <nick...@nvidia.com>; Igor Kulchytskyy <ig...@ami.com>; > > Oram, Isaac W <isaac.w.o...@intel.com>; Abdul Lateef Attar > > <abdullateef.at...@amd.com> > > Subject: [PATCH v3] MdePkg/Include: Add DMTF MCTP definitions > > > > From: Abner Chang <abner.ch...@amd.com> > > > > BZ #4355 > > This change adds definitions for DMTF MCTP base specification. > > > > Spec ref: > > > https://www.dmtf.org/sites/default/files/standards/documents/DSP0236_1 > > .3.1.pdf > > > > Signed-off-by: Abner Chang <abner.ch...@amd.com> > > Cc: Michael D Kinney <michael.d.kin...@intel.com> > > Cc: Liming Gao <gaolim...@byosoft.com.cn> > > Cc: Zhiguang Liu <zhiguang....@intel.com> > > Cc: Nickle Wang <nick...@nvidia.com> > > Cc: Igor Kulchytskyy <ig...@ami.com> > > Cc: Isaac Oram <isaac.w.o...@intel.com> > > Cc: Abdul Lateef Attar <abdullateef.at...@amd.com> > > Acked-by: Isaac Oram <isaac.w.o...@intel.com> > > --- > > MdePkg/Include/IndustryStandard/Mctp.h | 138 > > +++++++++++++++++++++++++ > > 1 file changed, 138 insertions(+) > > create mode 100644 MdePkg/Include/IndustryStandard/Mctp.h > > > > diff --git a/MdePkg/Include/IndustryStandard/Mctp.h > > b/MdePkg/Include/IndustryStandard/Mctp.h > > new file mode 100644 > > index 00000000000..bfbc843c7f1 > > --- /dev/null > > +++ b/MdePkg/Include/IndustryStandard/Mctp.h > > @@ -0,0 +1,138 @@ > > +/** @file > > + > > + The definitions of DMTF Management Component Transport Protocol > > + (MCTP) Base Specification. > > + > > + Copyright (C) 2023 Advanced Micro Devices, Inc. All rights > > + reserved.<BR> > > + SPDX-License-Identifier: BSD-2-Clause-Patent > > + > > + @par Revision Reference: > > + DMTF Management Component Transport Protocol (MCTP) Base > > +Specification > > + Version 1.3.1 > > + > > > +https://www.dmtf.org/sites/default/files/standards/documents/DSP0236_ > > +1.3.1.pdf > > +**/ > > + > > +#ifndef MCTP_H_ > > +#define MCTP_H_ > > + > > +/// > > +/// Definitions of endpoint ID > > +/// > > +#define MCTP_NULL_DESTINATION_ENDPOINT_ID 0 > > +#define MCTP_NULL_SOURCE_ENDPOINT_ID 0 > > +#define MCTP_RESERVED_ENDPOINT_START_ID 1 > > +#define MCTP_RESERVED_ENDPOINT_END_ID 7 > > +#define MCTP_BROADCAST_ENDPOINT_ID 0xFF > > + > > +/// Minimum transmission size is 64 bytes. > > +/// The value of 64 is defined in MCTP Base Specification. > > +#define MCTP_BASELINE_MINIMUM_UNIT_TRANSMISSION_SIZE 0x40 > > + > > +/// > > +/// The 32-bit Header of MCTP packet. > > +/// > > +typedef union { > > + struct { > > + UINT8 HeaderVersion : 4; ///< The version of header. > > + UINT8 Reserved : 4; ///< Reserved for future > > definitions. > > + UINT8 DestinationEndpointId : 8; ///< Destination endpoint Id (EID). > > + UINT8 SourceEndpointIdId : 8; ///< Source endpoint Id (EID) > > + UINT8 MessageTag : 3; ///< Check the MCTP Base > > specification > for the > > + ///< usages. > > + UINT8 TagOwner : 1; ///< Tag owner identifies the > > message was > > + ///< originated by the source EID > > or > > + ///< destination EID. > > + UINT8 PacketSequence : 2; ///< Sequence number increments > Modulo 4 on > > + ///< each packet. > > + UINT8 EndOfMessage : 1; ///< Indicates the last packet of > message. > > + UINT8 StartOfMessage : 1; ///< Indicates the first packet of > message. > > These bitfields should be type UINT32 > > > + } Bits; > > + UINT32 Header; > > +} MCTP_TRANSPORT_HEADER; > > + > > +/// > > +/// The 8-bit Message Header of MCTP packet. > > +/// > > +typedef union { > > + struct { > > + UINT8 MessageType : 7; > > + UINT8 ItegrityCheck : 1; > > + } Bits; > > + UINT8 MessageHeader; > > +} MCTP_MESSAGE_HEADER; > > + > > +/// > > +/// MCTP Control Commands > > +/// > > +#define MCTP_CONTROL_RESERVED 0x00 > > +#define MCTP_CONTROL_SET_ENDPOINT_ID 0x01 > > +#define MCTP_CONTROL_GET_ENDPOINT_ID 0x02 > > +#define MCTP_CONTROL_GET_ENDPOINT_UUID 0x03 > > +#define MCTP_CONTROL_GET_MCTP_VERSION_SUPPORT 0x04 > > +#define MCTP_CONTROL_GET_MESSAGE_TYPE_SUPPORT 0x05 > > +#define MCTP_CONTROL_GET_VENDOR_DEFINED_MESSAGE_SUPPORT > 0x06 > > +#define MCTP_CONTROL_RESOLVE_ENDPOINT_ID 0x07 > > +#define MCTP_CONTROL_ALLOCATE_ENDPOINT_IDS 0x08 > > +#define MCTP_CONTROL_ROUTING_INFORMATION_UPDATE 0x09 > > +#define MCTP_CONTROL_GET_ROUTINE_TABLE_ENTRIES 0x0A > > +#define MCTP_CONTROL_PREPARE_FOR_ENDPOINT_DISCOVERY > 0x0B > > +#define MCTP_CONTROL_ENDPOINT_DISCOVERY 0x0C > > +#define MCTP_CONTROL_DISCOVERY_NOTIFY 0x0D > > +#define MCTP_CONTROL_GET_NETWORK_ID 0x0E > > +#define MCTP_CONTROL_QUERY_HOP 0x0F > > +#define MCTP_CONTROL_RESOLVE_UUID 0x10 > > +#define MCTP_CONTROL_QUERY_RATE_LIMIT 0x11 > > +#define MCTP_CONTROL_REQUEST_TX_RATE_LIMIT 0x12 > > +#define MCTP_CONTROL_UPDATE_RATE_LIMIT 0x13 > > +#define MCTP_CONTROL_QUERY_SUPPORTED_INTERFACES 0x14 > > +#define MCTP_CONTROL_TRANSPORT_SPECIFIC_START 0xF0 > > +#define MCTP_CONTROL_TRANSPORT_SPECIFIC_END 0xFF > > + > > +/// > > +/// MCTP Control Message Completion Codes /// > > +#define MCTP_CONTROL_COMPLETION_CODES_SUCCESS 0x00 > > +#define MCTP_CONTROL_COMPLETION_CODES_ERROR 0x01 > > +#define MCTP_CONTROL_COMPLETION_CODES_ERROR_INVALID_DATA > 0x02 > > +#define > MCTP_CONTROL_COMPLETION_CODES_ERROR_INVALID_LENGTH 0x03 > > +#define MCTP_CONTROL_COMPLETION_CODES_ERROR_NOT_READY > 0x04 > > +#define > MCTP_CONTROL_COMPLETION_CODES_ERROR_UNSUPPORTED_CMD 0x05 > > +#define > MCTP_CONTROL_COMPLETION_CODES_COMMAND_SPECIFIC_START 0x80 > > +#define > MCTP_CONTROL_COMPLETION_CODES_COMMAND_SPECIFIC_END 0xFF > > + > > +/// > > +/// MCTP Control Message Types > > +/// > > +#define MCTP_MESSAGE_TYPE_CONTROL 0x00 > > +#define MCTP_MESSAGE_TYPE_PLDM 0x01 > > +#define MCTP_MESSAGE_TYPE_NCSI 0x02 > > +#define MCTP_MESSAGE_TYPE_ETHERNET 0x03 > > +#define MCTP_MESSAGE_TYPE_NVME 0x04 > > +#define MCTP_MESSAGE_TYPE_SPDM 0x05 > > +#define MCTP_MESSAGE_TYPE_SECURE_MESSAGE 0x06 > > +#define MCTP_MESSAGE_TYPE_CXL_FM_API 0x07 > > +#define MCTP_MESSAGE_TYPE_CXL_CCI 0x08 > > +#define MCTP_MESSAGE_TYPE_VENDOR_DEFINED_PCI 0x7E > > +#define MCTP_MESSAGE_TYPE_VENDOR_DEFINED_IANA 0x7F > > + > > +#define MCTP_ENDPOINT_ID_NULL 0 > > +#define MCTP_ENDPOINT_ID_RESERVED_START 1 > > +#define MCTP_ENDPOINT_ID_RESERVED_END 7 > > +#define MCTP_ENDPOINT_ID_BROADCAST 0xff > > +/// > > +/// MCTP Control Message Format > > +/// > > +typedef struct { > > + struct { > > + UINT8 IntegrityCheck : 1; ///< Message integrity check. > > + UINT8 MessageType : 7; ///< Message type. > > + UINT8 RequestBit : 1; ///< Request bit. > > + UINT8 DatagramBit : 1; ///< Datagram bit. > > + UINT8 Reserved : 1; ///< Reserved bit. > > + UINT8 InstanceId : 5; ///< Instance ID. > > + UINT8 CommandCode : 8; ///< Command code of request message. > > + UINT8 CompletionCode : 8; ///< Completion code in response > message. > > These bitfields should be type UINT32. > > > + } Bits; > > + UINT32 BodyHeader; > > +} MCTP_CONTROL_MESSAGE; > > +#endif > > -- > > 2.37.1.windows.1 -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#101719): https://edk2.groups.io/g/devel/message/101719 Mute This Topic: https://groups.io/mt/97802772/21656 Group Owner: devel+ow...@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-