From: Narinder Dhillon <ndhil...@marvell.com> This patch adds watchdog driver for Odyssey SoC.
Signed-off-by: Narinder Dhillon <ndhil...@marvell.com> --- .../Drivers/Wdt/GtiWatchdogDxe/GtiWatchdog.c | 408 ++++++++++++++++++ .../Wdt/GtiWatchdogDxe/GtiWatchdogDxe.inf | 45 ++ 2 files changed, 453 insertions(+) create mode 100644 Silicon/Marvell/Drivers/Wdt/GtiWatchdogDxe/GtiWatchdog.c create mode 100644 Silicon/Marvell/Drivers/Wdt/GtiWatchdogDxe/GtiWatchdogDxe.inf diff --git a/Silicon/Marvell/Drivers/Wdt/GtiWatchdogDxe/GtiWatchdog.c b/Silicon/Marvell/Drivers/Wdt/GtiWatchdogDxe/GtiWatchdog.c new file mode 100644 index 0000000000..12be08ff24 --- /dev/null +++ b/Silicon/Marvell/Drivers/Wdt/GtiWatchdogDxe/GtiWatchdog.c @@ -0,0 +1,408 @@ +/** @file +* +* SPDX-License-Identifier: BSD-2-Clause-Patent +* https://spdx.org/licenses +* +* Copyright (C) 2022 Marvell +* +* Source file for Marvell Watchdog driver +* +**/ + + +#include <PiDxe.h> + +#include <Library/BaseLib.h> +#include <Library/DebugLib.h> +#include <Library/IoLib.h> +#include <Library/PcdLib.h> +#include <Library/UefiBootServicesTableLib.h> +#include <Library/UefiLib.h> + +#include <Protocol/FdtClient.h> +#include <Protocol/WatchdogTimer.h> + +#define GTI_CWD_WDOG(Core) (FixedPcdGet64(PcdGtiWatchdogBase64) + 0x40000 + Core * 0x8) +#define GTI_CWD_POKE(Core) (FixedPcdGet64(PcdGtiWatchdogBase64) + 0x50000 + Core * 0x8) + +typedef union _GTI_CWD_WDOG_UNION { + UINT64 U64; + struct { + UINTN Mode : 2; + UINTN State : 2; + UINTN Len : 16; + UINTN Cnt : 24; + UINTN DStop : 1; + UINTN GStop : 1; + UINTN Rsvd : 18; + } PACKED S; +} GTI_CWD_WDOG_UNION; + +#define CWD_WDOG_MODE_RST (BIT1 | BIT0) + +#define RST_BOOT_PNR_MUL(Val) ((Val >> 33) & 0x1F) + +EFI_EVENT mGtiExitBootServicesEvent = (EFI_EVENT)NULL; +UINT32 mSclk = 0; +BOOLEAN mHardwarePlatform = TRUE; + +/** + Stop the GTI watchdog timer from counting down by disabling interrupts. +**/ +STATIC +VOID +GtiWdtStop ( + VOID + ) +{ + GTI_CWD_WDOG_UNION Wdog; + + MmioWrite64(GTI_CWD_POKE(0), 0); + + Wdog.U64 = MmioRead64(GTI_CWD_WDOG(0)); + + // Disable WDT + if (Wdog.S.Mode != 0) { + Wdog.S.Len = 1; + Wdog.S.Mode = 0; + MmioWrite64 (GTI_CWD_WDOG(0), Wdog.U64); + } +} + +/** + Starts the GTI WDT countdown by enabling interrupts. + The count down will start from the value stored in the Load register, + not from the value where it was previously stopped. +**/ +STATIC +VOID +GtiWdtStart ( + VOID + ) +{ + GTI_CWD_WDOG_UNION Wdog; + + // Reset the WDT + MmioWrite64 (GTI_CWD_POKE(0), 0); + + Wdog.U64 = MmioRead64 (GTI_CWD_WDOG(0)); + + // Enable countdown + if (Wdog.S.Mode == 0) { + Wdog.S.Mode = CWD_WDOG_MODE_RST; + MmioWrite64 (GTI_CWD_WDOG(0), Wdog.U64); + } +} + +/** + On exiting boot services we must make sure the SP805 Watchdog Timer + is stopped. +**/ +VOID +EFIAPI +GtiExitBootServices ( + IN EFI_EVENT Event, + IN VOID *Context + ) +{ + MmioWrite64 (GTI_CWD_POKE(0), 0); + GtiWdtStop (); +} + +/** + This function registers the handler NotifyFunction so it is called every time + the watchdog timer expires. It also passes the amount of time since the last + handler call to the NotifyFunction. + If NotifyFunction is not NULL and a handler is not already registered, + then the new handler is registered and EFI_SUCCESS is returned. + If NotifyFunction is NULL, and a handler is already registered, + then that handler is unregistered. + If an attempt is made to register a handler when a handler is already registered, + then EFI_ALREADY_STARTED is returned. + If an attempt is made to unregister a handler when a handler is not registered, + then EFI_INVALID_PARAMETER is returned. + + @param This The EFI_TIMER_ARCH_PROTOCOL instance. + @param NotifyFunction The function to call when a timer interrupt fires. This + function executes at TPL_HIGH_LEVEL. The DXE Core will + register a handler for the timer interrupt, so it can know + how much time has passed. This information is used to + signal timer based events. NULL will unregister the handler. + + @retval EFI_SUCCESS The watchdog timer handler was registered. + @retval EFI_ALREADY_STARTED NotifyFunction is not NULL, and a handler is already + registered. + @retval EFI_INVALID_PARAMETER NotifyFunction is NULL, and a handler was not + previously registered. + @retval EFI_UNSUPPORTED HW does not support this functionality. + +**/ +EFI_STATUS +EFIAPI +GtiWdtRegisterHandler ( + IN CONST EFI_WATCHDOG_TIMER_ARCH_PROTOCOL *This, + IN EFI_WATCHDOG_TIMER_NOTIFY NotifyFunction + ) +{ + // UNSUPPORTED - The hardware watchdog will reset the board + return EFI_UNSUPPORTED; +} + +/** + + This function adjusts the period of timer interrupts to the value specified + by TimerPeriod. If the timer period is updated, then the selected timer + period is stored in EFI_TIMER.TimerPeriod, and EFI_SUCCESS is returned. If + the timer hardware is not programmable, then EFI_UNSUPPORTED is returned. + If an error occurs while attempting to update the timer period, then the + timer hardware will be put back in its state prior to this call, and + EFI_DEVICE_ERROR is returned. If TimerPeriod is 0, then the timer interrupt + is disabled. This is not the same as disabling the CPU's interrupts. + Instead, it must either turn off the timer hardware, or it must adjust the + interrupt controller so that a CPU interrupt is not generated when the timer + interrupt fires. + + @param This The EFI_TIMER_ARCH_PROTOCOL instance. + @param TimerPeriod The rate to program the timer interrupt in 100 nS units. If + the timer hardware is not programmable, then EFI_UNSUPPORTED is + returned. If the timer is programmable, then the timer period + will be rounded up to the nearest timer period that is supported + by the timer hardware. If TimerPeriod is set to 0, then the + timer interrupts will be disabled. + + + @retval EFI_SUCCESS The timer period was changed. + @retval EFI_UNSUPPORTED The platform cannot change the period of the timer interrupt. + @retval EFI_DEVICE_ERROR The timer period could not be changed due to a device error. + +**/ +EFI_STATUS +EFIAPI +GtiWdtSetTimerPeriod ( + IN CONST EFI_WATCHDOG_TIMER_ARCH_PROTOCOL *This, + IN UINT64 TimerPeriod // In 100ns units + ) +{ + UINT32 Clock; + UINT64 CountDown; + GTI_CWD_WDOG_UNION Wdog; + + if (TimerPeriod == 0) { + + // This is a watchdog stop request + GtiWdtStop(); + + return EFI_SUCCESS; + } else { + // + // The system is reset only after the WDT expires for the 3rd time + // + + Clock = mSclk / 1000000; //MHz + CountDown = DivU64x32 (MultU64x32 (TimerPeriod, Clock), 30); + + // WDT counts in 1024 cycle steps + // Only upper 16 bits can be used + + Wdog.U64 = 0; + Wdog.S.Len = (CountDown + (0xFF << 10)) >> 18; + MmioWrite64 (GTI_CWD_WDOG(0), Wdog.U64); + + // Start the watchdog + if (mHardwarePlatform == TRUE) { + GtiWdtStart(); + } + } + + return EFI_SUCCESS; +} + +/** + This function retrieves the period of timer interrupts in 100 ns units, + returns that value in TimerPeriod, and returns EFI_SUCCESS. If TimerPeriod + is NULL, then EFI_INVALID_PARAMETER is returned. If a TimerPeriod of 0 is + returned, then the timer is currently disabled. + + @param This The EFI_TIMER_ARCH_PROTOCOL instance. + @param TimerPeriod A pointer to the timer period to retrieve in 100 ns units. If + 0 is returned, then the timer is currently disabled. + + + @retval EFI_SUCCESS The timer period was returned in TimerPeriod. + @retval EFI_INVALID_PARAMETER TimerPeriod is NULL. + +**/ +EFI_STATUS +EFIAPI +GtiWdtGetTimerPeriod ( + IN CONST EFI_WATCHDOG_TIMER_ARCH_PROTOCOL *This, + OUT UINT64 *TimerPeriod + ) +{ + UINT32 Clock; + UINT64 CountDown; + UINT64 ReturnValue; + GTI_CWD_WDOG_UNION Wdog; + + if (TimerPeriod == NULL) { + return EFI_INVALID_PARAMETER; + } + + Wdog.U64 = MmioRead64 (GTI_CWD_WDOG(0)); + + // Check if the watchdog is stopped + if (Wdog.S.Mode == 0) { + // It is stopped, so return zero. + ReturnValue = 0; + } else { + // Convert the Watchdog ticks into TimerPeriod + Clock = mSclk / 1000000; //MHz + CountDown = Wdog.S.Len << 18; + + ReturnValue = MultU64x32(DivU64x32(3 * CountDown, Clock), 10); // usecs * 10 + } + + *TimerPeriod = ReturnValue; + + return EFI_SUCCESS; +} + +/** + Interface structure for the Watchdog Architectural Protocol. + + @par Protocol Description: + This protocol provides a service to set the amount of time to wait + before firing the watchdog timer, and it also provides a service to + register a handler that is invoked when the watchdog timer fires. + + @par When the watchdog timer fires, control will be passed to a handler + if one has been registered. If no handler has been registered, + or the registered handler returns, then the system will be + reset by calling the Runtime Service ResetSystem(). + + @param RegisterHandler + Registers a handler that will be called each time the + watchdogtimer interrupt fires. TimerPeriod defines the minimum + time between timer interrupts, so TimerPeriod will also + be the minimum time between calls to the registered + handler. + NOTE: If the watchdog resets the system in hardware, then + this function will not have any chance of executing. + + @param SetTimerPeriod + Sets the period of the timer interrupt in 100 nS units. + This function is optional, and may return EFI_UNSUPPORTED. + If this function is supported, then the timer period will + be rounded up to the nearest supported timer period. + + @param GetTimerPeriod + Retrieves the period of the timer interrupt in 100 nS units. + +**/ +EFI_WATCHDOG_TIMER_ARCH_PROTOCOL gWatchdogTimer = { + (EFI_WATCHDOG_TIMER_REGISTER_HANDLER) GtiWdtRegisterHandler, + (EFI_WATCHDOG_TIMER_SET_TIMER_PERIOD) GtiWdtSetTimerPeriod, + (EFI_WATCHDOG_TIMER_GET_TIMER_PERIOD) GtiWdtGetTimerPeriod +}; + +/** + Initialize the state information for the Watchdog Timer Architectural Protocol. + + @param ImageHandle of the loaded driver + @param SystemTable Pointer to the System Table + + @retval EFI_SUCCESS Protocol registered + @retval EFI_OUT_OF_RESOURCES Cannot allocate protocol data structure + @retval EFI_DEVICE_ERROR Hardware problems + +**/ +EFI_STATUS +EFIAPI +GtiWdtInitialize ( + IN EFI_HANDLE ImageHandle, + IN EFI_SYSTEM_TABLE *SystemTable + ) +{ + EFI_STATUS Status; + EFI_HANDLE Handle = NULL; + FDT_HANDLE SclkHandle = 0; + FDT_HANDLE RootHandle = 0; + CONST UINT32 *SclkFreq = NULL; + FDT_CLIENT_PROTOCOL *FdtClient = NULL; + CONST CHAR8 *Platform; + + DEBUG ((DEBUG_INFO, "GtiWdtInitialize: Start\n")); + // Stop the watchdog from triggering unexpectedly + GtiWdtStop (); + + // + // Make sure the Watchdog Timer Architectural Protocol has not been installed in the system yet. + // This will avoid conflicts with the universal watchdog + // + ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gEfiWatchdogTimerArchProtocolGuid); + + Status = gBS->LocateProtocol (&gFdtClientProtocolGuid, + NULL, + (VOID **)&FdtClient); + + if (EFI_ERROR (Status) || (FdtClient == NULL)) { + DEBUG ((DEBUG_ERROR, "%a: ERROR: cannot locate: gFdtClientProtocolGuid\n", __func__)); + return EFI_ABORTED; + } + + Status = FdtClient->GetNode (FdtClient, "/soc@0/sclk", &SclkHandle); + if (EFI_ERROR (Status) || !SclkHandle) { + DEBUG ((DEBUG_ERROR, "%a: %s node not found!\n", __func__, L"/soc@0/sclk")); + return EFI_NOT_FOUND; + } + + DEBUG ((DEBUG_INFO, "%a: Found: %s\n", __func__, L"/soc@0/sclk")); + Status = FdtClient->GetNodeProperty (FdtClient, + SclkHandle, + "clock-frequency", + (CONST VOID **)&SclkFreq, + NULL); + if (EFI_ERROR (Status) || NULL == SclkFreq) { + DEBUG ((DEBUG_ERROR, "%a: %s property not found!\n", __func__, L"\"clock-frequency\"")); + return EFI_NO_MAPPING; + } + + mSclk = FdtToCpu32(*SclkFreq); + DEBUG ((DEBUG_INFO, "%a: DT sclk = %d Mhz (0x%x)\n", __func__, mSclk/1000000, mSclk)); + + Status = FdtClient->GetNode (FdtClient, "/soc@0", &RootHandle); + if (!EFI_ERROR (Status) && RootHandle) { + Status = FdtClient->GetNodeProperty (FdtClient, + RootHandle, + "runplatform", + (CONST VOID **)&Platform, + NULL); + if (!EFI_ERROR (Status)) { + if (AsciiStrCmp (Platform, "HW_PLATFORM")) { + mHardwarePlatform = FALSE; + DEBUG ((DEBUG_INFO, "%a: Not a hardware platform\n", __func__)); + } + } + } + + // Register for an ExitBootServicesEvent + Status = gBS->CreateEvent (EVT_SIGNAL_EXIT_BOOT_SERVICES, + TPL_NOTIFY, + GtiExitBootServices, + NULL, + &mGtiExitBootServicesEvent); + ASSERT_EFI_ERROR(Status); + + // Install the Timer Architectural Protocol onto a new handle + Handle = NULL; + Status = gBS->InstallMultipleProtocolInterfaces( + &Handle, + &gEfiWatchdogTimerArchProtocolGuid, &gWatchdogTimer, + NULL + ); + ASSERT_EFI_ERROR (Status); + + DEBUG ((DEBUG_INFO, "GtiWdtInitialize: Exit\n")); + + return EFI_SUCCESS; +} diff --git a/Silicon/Marvell/Drivers/Wdt/GtiWatchdogDxe/GtiWatchdogDxe.inf b/Silicon/Marvell/Drivers/Wdt/GtiWatchdogDxe/GtiWatchdogDxe.inf new file mode 100644 index 0000000000..f9aa4da246 --- /dev/null +++ b/Silicon/Marvell/Drivers/Wdt/GtiWatchdogDxe/GtiWatchdogDxe.inf @@ -0,0 +1,45 @@ +#/** @file +# +# SPDX-License-Identifier: BSD-2-Clause-Patent +# https://spdx.org/licenses +# +# Copyright (C) 2022 Marvell +# +# Module definition file for Marvell Watchdog driver. +# +#**/ + +[Defines] + INF_VERSION = 0x00010005 + BASE_NAME = GtiWatchdogDxe + FILE_GUID = 789F5711-6FD3-4170-BE11-EE4000037EA8 + MODULE_TYPE = DXE_DRIVER + VERSION_STRING = 1.0 + + ENTRY_POINT = GtiWdtInitialize + +[Sources.common] + GtiWatchdog.c + +[Packages] + Silicon/Marvell/MarvellSiliconPkg/MarvellSiliconPkg.dec + MdePkg/MdePkg.dec + +[LibraryClasses] + BaseLib + DebugLib + IoLib + PcdLib + UefiLib + UefiBootServicesTableLib + UefiDriverEntryPoint + +[FixedPcd] + gMarvellSiliconTokenSpaceGuid.PcdGtiWatchdogBase64 + +[Protocols] + gEfiWatchdogTimerArchProtocolGuid #PRODUCES + gFdtClientProtocolGuid #CONSUMED + +[Depex] + gFdtClientProtocolGuid -- 2.34.1 -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#112782): https://edk2.groups.io/g/devel/message/112782 Mute This Topic: https://groups.io/mt/103292512/21656 Group Owner: devel+ow...@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-