Reviewed-by: Ray Ni <ray...@intel.com>

Thanks,
Ray
________________________________
From: Wu, Jiaxin <jiaxin...@intel.com>
Sent: Thursday, April 18, 2024 14:55
To: devel@edk2.groups.io <devel@edk2.groups.io>
Cc: Ni, Ray <ray...@intel.com>; Zeng, Star <star.z...@intel.com>; Gerd Hoffmann 
<kra...@redhat.com>; Kumar, Rahul R <rahul.r.ku...@intel.com>
Subject: [PATCH v3 04/13] UefiCpuPkg/SmmRelocationLib: Avoid unnecessary memory 
allocation

Since SMM relocation is performed serially for each CPU, there is
no need to allocate buffers for all CPUs to store the SmBase
address in mSmBase and the Rebased flag in mRebased. A defined
global variable is sufficient.

This patch focuses on the mSmBase and mRebased global variables
to prevent unnecessary memory allocation for these variables.

Cc: Ray Ni <ray...@intel.com>
Cc: Zeng Star <star.z...@intel.com>
Cc: Gerd Hoffmann <kra...@redhat.com>
Cc: Rahul Kumar <rahul1.ku...@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin...@intel.com>
---
 .../Library/SmmRelocationLib/SmmRelocationLib.c    | 201 +++++++++------------
 1 file changed, 90 insertions(+), 111 deletions(-)

diff --git a/UefiCpuPkg/Library/SmmRelocationLib/SmmRelocationLib.c 
b/UefiCpuPkg/Library/SmmRelocationLib/SmmRelocationLib.c
index ca98f06a05..3694a07cbb 100644
--- a/UefiCpuPkg/Library/SmmRelocationLib/SmmRelocationLib.c
+++ b/UefiCpuPkg/Library/SmmRelocationLib/SmmRelocationLib.c
@@ -25,31 +25,57 @@ EFI_PROCESSOR_INFORMATION  *mProcessorInfo = NULL;
 // IDT used during SMM Init
 //
 IA32_DESCRIPTOR  gcSmmInitIdtr;

 //
-// Smbase for all CPUs
+// Smbase for current CPU
 //
-UINT64  *mSmBase = NULL;
+UINT64  mSmBase;

 //
-// SmBase Rebased flag for all CPUs
+// SmBase Rebased flag for current CPU
 //
-volatile BOOLEAN  *mRebased;
+volatile BOOLEAN  mRebased;
+
+/**
+  This function will get the SmBase for CpuIndex.
+
+  @param[in]   CpuIndex            The processor index.
+  @param[in]   SmmRelocationStart  The start address of Smm relocated memory 
in SMRAM.
+  @param[in]   TileSize            The total size required for a CPU save 
state, any
+                                   additional CPU-specific context and the 
size of code
+                                   for the SMI entry point.
+
+  @retval The value of SmBase for CpuIndex.
+
+**/
+UINTN
+GetSmBase (
+  IN UINTN                 CpuIndex,
+  IN EFI_PHYSICAL_ADDRESS  SmmRelocationStart,
+  IN UINTN                 TileSize
+  )
+{
+  return (UINTN)(SmmRelocationStart) + CpuIndex * TileSize - 
SMM_HANDLER_OFFSET;
+}

 /**
   This function will create SmBase for all CPUs.

-  @param[in] SmBase    Pointer to SmBase for all CPUs.
+  @param[in]   SmmRelocationStart  The start address of Smm relocated memory 
in SMRAM.
+  @param[in]   TileSize            The total size required for a CPU save 
state, any
+                                   additional CPU-specific context and the 
size of code
+                                   for the SMI entry point.

   @retval EFI_SUCCESS           Create SmBase for all CPUs successfully.
   @retval Others                Failed to create SmBase for all CPUs.

 **/
 EFI_STATUS
 CreateSmmBaseHob (
-  IN UINT64  *SmBase
+  IN EFI_PHYSICAL_ADDRESS  SmmRelocationStart,
+  IN UINTN                 TileSize
   )
 {
   UINTN              Index;
   SMM_BASE_HOB_DATA  *SmmBaseHobData;
   UINT32             CpuCount;
@@ -90,11 +116,11 @@ CreateSmmBaseHob (
     DEBUG ((DEBUG_INFO, "CreateSmmBaseHob - 
SmmBaseHobData[%d]->NumberOfProcessors: %d\n", HobCount, 
SmmBaseHobData->NumberOfProcessors));
     for (Index = 0; Index < SmmBaseHobData->NumberOfProcessors; Index++) {
       //
       // Calculate the new SMBASE address
       //
-      SmmBaseHobData->SmBase[Index] = SmBase[Index + CpuCount];
+      SmmBaseHobData->SmBase[Index] = GetSmBase (Index + CpuCount, 
SmmRelocationStart, TileSize);
       DEBUG ((DEBUG_INFO, "CreateSmmBaseHob - SmmBaseHobData[%d]->SmBase[%d]: 
0x%08x\n", HobCount, Index, SmmBaseHobData->SmBase[Index]));
     }

     CpuCount += NumberOfProcessorsInHob;
     HobCount++;
@@ -126,18 +152,18 @@ SmmInitHandler (
   for (Index = 0; Index < mNumberOfCpus; Index++) {
     if (ApicId == (UINT32)mProcessorInfo[Index].ProcessorId) {
       //
       // Configure SmBase.
       //
-      ConfigureSmBase (mSmBase[Index]);
+      ConfigureSmBase (mSmBase);

       //
       // Hook return after RSM to set SMM re-based flag
       // SMM re-based flag can't be set before RSM, because SMM save state 
context might be override
       // by next AP flow before it take effect.
       //
-      SemaphoreHook (Index, &mRebased[Index]);
+      SemaphoreHook (Index, &mRebased);
       return;
     }
   }

   ASSERT (FALSE);
@@ -145,14 +171,22 @@ SmmInitHandler (

 /**
   Relocate SmmBases for each processor.
   Execute on first boot and all S3 resumes

+  @param[in]   MpServices2         Pointer to this instance of the MpServices.
+  @param[in]   SmmRelocationStart  The start address of Smm relocated memory 
in SMRAM.
+  @param[in]   TileSize            The total size required for a CPU save 
state, any
+                                   additional CPU-specific context and the 
size of code
+                                   for the SMI entry point.
+
 **/
 VOID
 SmmRelocateBases (
-  VOID
+  IN EDKII_PEI_MP_SERVICES2_PPI  *MpServices2,
+  IN EFI_PHYSICAL_ADDRESS        SmmRelocationStart,
+  IN UINTN                       TileSize
   )
 {
   UINT8                 BakBuf[BACK_BUF_SIZE];
   SMRAM_SAVE_STATE_MAP  BakBuf2;
   SMRAM_SAVE_STATE_MAP  *CpuStatePtr;
@@ -196,17 +230,18 @@ SmmRelocateBases (
   // Relocate SM bases for all APs
   // This is APs' 1st SMI - rebase will be done here, and APs' default SMI 
handler will be overridden by gcSmmInitTemplate
   //
   BspIndex = (UINTN)-1;
   for (Index = 0; Index < mNumberOfCpus; Index++) {
-    mRebased[Index] = FALSE;
     if (BspApicId != (UINT32)mProcessorInfo[Index].ProcessorId) {
+      mRebased = FALSE;
+      mSmBase  = GetSmBase (Index, SmmRelocationStart, TileSize);
       SendSmiIpi ((UINT32)mProcessorInfo[Index].ProcessorId);
       //
       // Wait for this AP to finish its 1st SMI
       //
-      while (!mRebased[Index]) {
+      while (!mRebased) {
       }
     } else {
       //
       // BSP will be Relocated later
       //
@@ -216,16 +251,18 @@ SmmRelocateBases (

   //
   // Relocate BSP's SMM base
   //
   ASSERT (BspIndex != (UINTN)-1);
+  mRebased = FALSE;
+  mSmBase  = GetSmBase (BspIndex, SmmRelocationStart, TileSize);
   SendSmiIpi (BspApicId);

   //
   // Wait for the BSP to finish its 1st SMI
   //
-  while (!mRebased[BspIndex]) {
+  while (!mRebased) {
   }

   //
   // Restore contents at address 0x38000
   //
@@ -382,87 +419,10 @@ SplitSmramHobForSmmRelocation (
   ZeroMem (&GuidHob->Name, sizeof (GuidHob->Name));

   return EFI_SUCCESS;
 }

-/**
-  This function will initialize SmBase for all CPUs.
-
-  @param[in,out] SmBase    Pointer to SmBase for all CPUs.
-
-  @retval EFI_SUCCESS           Initialize SmBase for all CPUs successfully.
-  @retval Others                Failed to initialize SmBase for all CPUs.
-
-**/
-EFI_STATUS
-InitSmBaseForAllCpus (
-  IN OUT UINT64  **SmBase
-  )
-{
-  EFI_STATUS            Status;
-  UINTN                 TileSize;
-  UINT64                SmmRelocationSize;
-  EFI_PHYSICAL_ADDRESS  SmmRelocationStart;
-  UINTN                 Index;
-
-  SmmRelocationStart = 0;
-
-  ASSERT (SmBase != NULL);
-
-  //
-  // Calculate SmmRelocationSize for all of the tiles.
-  //
-  // The CPU save state and code for the SMI entry point are tiled within an 
SMRAM
-  // allocated buffer. The minimum size of this buffer for a uniprocessor 
system
-  // is 32 KB, because the entry point is SMBASE + 32KB, and CPU save state 
area
-  // just below SMBASE + 64KB. If more than one CPU is present in the platform,
-  // then the SMI entry point and the CPU save state areas can be tiles to 
minimize
-  // the total amount SMRAM required for all the CPUs. The tile size can be 
computed
-  // by adding the CPU save state size, any extra CPU specific context, and
-  // the size of code that must be placed at the SMI entry point to transfer
-  // control to a C function in the native SMM execution mode. This size is
-  // rounded up to the nearest power of 2 to give the tile size for a each CPU.
-  // The total amount of memory required is the maximum number of CPUs that
-  // platform supports times the tile size.
-  //
-  TileSize          = SIZE_8KB;
-  SmmRelocationSize = EFI_PAGES_TO_SIZE (EFI_SIZE_TO_PAGES (SIZE_32KB + 
TileSize * (mMaxNumberOfCpus - 1)));
-
-  //
-  // Split SmramReserve HOB to reserve SmmRelocationSize for Smm relocated 
memory
-  //
-  Status = SplitSmramHobForSmmRelocation (
-             SmmRelocationSize,
-             &SmmRelocationStart
-             );
-  if (EFI_ERROR (Status)) {
-    return Status;
-  }
-
-  ASSERT (SmmRelocationStart != 0);
-  DEBUG ((DEBUG_INFO, "InitSmBaseForAllCpus - SmmRelocationSize: 0x%08x\n", 
SmmRelocationSize));
-  DEBUG ((DEBUG_INFO, "InitSmBaseForAllCpus - SmmRelocationStart: 0x%08x\n", 
SmmRelocationStart));
-
-  //
-  // Init SmBase
-  //
-  *SmBase = (UINT64 *)AllocatePages (EFI_SIZE_TO_PAGES (sizeof (UINT64) * 
mMaxNumberOfCpus));
-  if (*SmBase == NULL) {
-    return EFI_OUT_OF_RESOURCES;
-  }
-
-  for (Index = 0; Index < mMaxNumberOfCpus; Index++) {
-    //
-    // Return each SmBase in SmBase
-    //
-    (*SmBase)[Index] = (UINTN)(SmmRelocationStart)+ Index * TileSize - 
SMM_HANDLER_OFFSET;
-    DEBUG ((DEBUG_INFO, "InitSmBaseForAllCpus - SmBase For CPU[%d]: 0x%08x\n", 
Index, (*SmBase)[Index]));
-  }
-
-  return EFI_SUCCESS;
-}
-
 /**
   CPU SmmBase Relocation Init.

   This function is to relocate CPU SmmBase.

@@ -476,17 +436,21 @@ EFI_STATUS
 EFIAPI
 SmmRelocationInit (
   IN EDKII_PEI_MP_SERVICES2_PPI  *MpServices2
   )
 {
-  EFI_STATUS  Status;
-  UINTN       NumberOfEnabledCpus;
-  UINTN       SmmStackSize;
-  UINT8       *SmmStacks;
-  UINTN       Index;
+  EFI_STATUS            Status;
+  UINTN                 NumberOfEnabledCpus;
+  UINTN                 TileSize;
+  UINT64                SmmRelocationSize;
+  EFI_PHYSICAL_ADDRESS  SmmRelocationStart;
+  UINTN                 SmmStackSize;
+  UINT8                 *SmmStacks;
+  UINTN                 Index;

-  SmmStacks = NULL;
+  SmmRelocationStart = 0;
+  SmmStacks          = NULL;

   DEBUG ((DEBUG_INFO, "SmmRelocationInit Start \n"));
   if (MpServices2 == NULL) {
     return EFI_INVALID_PARAMETER;
   }
@@ -528,17 +492,43 @@ SmmRelocationInit (
       }
     }
   }

   //
-  // Initialize the SmBase for all CPUs
+  // Calculate SmmRelocationSize for all of the tiles.
   //
-  Status = InitSmBaseForAllCpus (&mSmBase);
+  // The CPU save state and code for the SMI entry point are tiled within an 
SMRAM
+  // allocated buffer. The minimum size of this buffer for a uniprocessor 
system
+  // is 32 KB, because the entry point is SMBASE + 32KB, and CPU save state 
area
+  // just below SMBASE + 64KB. If more than one CPU is present in the platform,
+  // then the SMI entry point and the CPU save state areas can be tiles to 
minimize
+  // the total amount SMRAM required for all the CPUs. The tile size can be 
computed
+  // by adding the CPU save state size, any extra CPU specific context, and
+  // the size of code that must be placed at the SMI entry point to transfer
+  // control to a C function in the native SMM execution mode. This size is
+  // rounded up to the nearest power of 2 to give the tile size for a each CPU.
+  // The total amount of memory required is the maximum number of CPUs that
+  // platform supports times the tile size.
+  //
+  TileSize          = SIZE_8KB;
+  SmmRelocationSize = EFI_PAGES_TO_SIZE (EFI_SIZE_TO_PAGES (SIZE_32KB + 
TileSize * (mMaxNumberOfCpus - 1)));
+
+  //
+  // Split SmramReserve HOB to reserve SmmRelocationSize for Smm relocated 
memory
+  //
+  Status = SplitSmramHobForSmmRelocation (
+             SmmRelocationSize,
+             &SmmRelocationStart
+             );
   if (EFI_ERROR (Status)) {
     goto ON_EXIT;
   }

+  ASSERT (SmmRelocationStart != 0);
+  DEBUG ((DEBUG_INFO, "SmmRelocationInit - SmmRelocationSize: 0x%08x\n", 
SmmRelocationSize));
+  DEBUG ((DEBUG_INFO, "SmmRelocationInit - SmmRelocationStart: 0x%08x\n", 
SmmRelocationStart));
+
   //
   // Fix up the address of the global variable or function referred in
   // SmmInit assembly files to be the absolute address
   //
   SmmInitFixupAddress ();
@@ -569,32 +559,21 @@ SmmRelocationInit (
   //
   InitSmmIdt ();

   //
   // Relocate SmmBases for each processor.
-  // Allocate mRebased as the flag to indicate the relocation is done for each 
CPU.
   //
-  mRebased = (BOOLEAN *)AllocateZeroPool (sizeof (BOOLEAN) * mMaxNumberOfCpus);
-  if (mRebased == NULL) {
-    Status = EFI_OUT_OF_RESOURCES;
-    goto ON_EXIT;
-  }
-
-  SmmRelocateBases ();
+  SmmRelocateBases (MpServices2, SmmRelocationStart, TileSize);

   //
   // Create the SmBase HOB for all CPUs
   //
-  Status = CreateSmmBaseHob (mSmBase);
+  Status = CreateSmmBaseHob (SmmRelocationStart, TileSize);

 ON_EXIT:
   if (SmmStacks != NULL) {
     FreePages (SmmStacks, EFI_SIZE_TO_PAGES (SmmStackSize));
   }

-  if (mSmBase != NULL) {
-    FreePages (mSmBase, EFI_SIZE_TO_PAGES (sizeof (UINT64) * 
mMaxNumberOfCpus));
-  }
-
   DEBUG ((DEBUG_INFO, "SmmRelocationInit Done\n"));
   return Status;
 }
--
2.16.2.windows.1



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#117961): https://edk2.groups.io/g/devel/message/117961
Mute This Topic: https://groups.io/mt/105593572/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-


Reply via email to