Hi Sahil, I cannot apply your patches cleanly. Can you share a github branch with your patches, please?
Regards, Sami Mujawar On 23/05/2024, 11:56, "Sahil Kaushal" <sahil.kaus...@arm.com <mailto:sahil.kaus...@arm.com>> wrote: From: sahil <sa...@arm.com <mailto:sa...@arm.com>> Moving these functions from NorFlash.c to NorFlashBlockIoDxe.c as they are not dependent on any particular flash implementation. Signed-off-by: sahil <sa...@arm.com <mailto:sa...@arm.com>> --- Platform/ARM/Drivers/NorFlashDxe/NorFlash.c | 129 -------------------- Platform/ARM/Drivers/NorFlashDxe/NorFlashBlockIoDxe.c | 129 ++++++++++++++++++++ 2 files changed, 129 insertions(+), 129 deletions(-) diff --git a/Platform/ARM/Drivers/NorFlashDxe/NorFlash.c b/Platform/ARM/Drivers/NorFlashDxe/NorFlash.c index 1b431073ee93..60854ef2a7d0 100644 --- a/Platform/ARM/Drivers/NorFlashDxe/NorFlash.c +++ b/Platform/ARM/Drivers/NorFlashDxe/NorFlash.c @@ -807,135 +807,6 @@ NorFlashWriteSingleBlock ( return EFI_SUCCESS; } -/* - Although DiskIoDxe will automatically install the DiskIO protocol whenever - we install the BlockIO protocol, its implementation is sub-optimal as it reads - and writes entire blocks using the BlockIO protocol. In fact we can access - NOR flash with a finer granularity than that, so we can improve performance - by directly producing the DiskIO protocol. -*/ - -/** - Read BufferSize bytes from Offset into Buffer. - - @param This Protocol instance pointer. - @param MediaId Id of the media, changes every time the media is replaced. - @param Offset The starting byte offset to read from - @param BufferSize Size of Buffer - @param Buffer Buffer containing read data - - @retval EFI_SUCCESS The data was read correctly from the device. - @retval EFI_DEVICE_ERROR The device reported an error while performing the read. - @retval EFI_NO_MEDIA There is no media in the device. - @retval EFI_MEDIA_CHANGED The MediaId does not match the current device. - @retval EFI_INVALID_PARAMETER The read request contains device addresses that are not - valid for the device. - -**/ -EFI_STATUS -EFIAPI -NorFlashDiskIoReadDisk ( - IN EFI_DISK_IO_PROTOCOL *This, - IN UINT32 MediaId, - IN UINT64 DiskOffset, - IN UINTN BufferSize, - OUT VOID *Buffer - ) -{ - NOR_FLASH_INSTANCE *Instance; - UINT32 BlockSize; - UINT32 BlockOffset; - EFI_LBA Lba; - - Instance = INSTANCE_FROM_DISKIO_THIS (This); - - if (MediaId != Instance->Media.MediaId) { - return EFI_MEDIA_CHANGED; - } - - BlockSize = Instance->Media.BlockSize; - Lba = (EFI_LBA)DivU64x32Remainder (DiskOffset, BlockSize, &BlockOffset); - - return NorFlashRead (Instance, Lba, BlockOffset, BufferSize, Buffer); -} - -/** - Writes a specified number of bytes to a device. - - @param This Indicates a pointer to the calling context. - @param MediaId ID of the medium to be written. - @param Offset The starting byte offset on the logical block I/O device to write. - @param BufferSize The size in bytes of Buffer. The number of bytes to write to the device. - @param Buffer A pointer to the buffer containing the data to be written. - - @retval EFI_SUCCESS The data was written correctly to the device. - @retval EFI_WRITE_PROTECTED The device can not be written to. - @retval EFI_DEVICE_ERROR The device reported an error while performing the write. - @retval EFI_NO_MEDIA There is no media in the device. - @retval EFI_MEDIA_CHANGED The MediaId does not match the current device. - @retval EFI_INVALID_PARAMETER The write request contains device addresses that are not - valid for the device. - -**/ -EFI_STATUS -EFIAPI -NorFlashDiskIoWriteDisk ( - IN EFI_DISK_IO_PROTOCOL *This, - IN UINT32 MediaId, - IN UINT64 DiskOffset, - IN UINTN BufferSize, - IN VOID *Buffer - ) -{ - NOR_FLASH_INSTANCE *Instance; - UINT32 BlockSize; - UINT32 BlockOffset; - EFI_LBA Lba; - UINTN RemainingBytes; - UINTN WriteSize; - EFI_STATUS Status; - - Instance = INSTANCE_FROM_DISKIO_THIS (This); - - if (MediaId != Instance->Media.MediaId) { - return EFI_MEDIA_CHANGED; - } - - BlockSize = Instance->Media.BlockSize; - Lba = (EFI_LBA)DivU64x32Remainder (DiskOffset, BlockSize, &BlockOffset); - - RemainingBytes = BufferSize; - - // Write either all the remaining bytes, or the number of bytes that bring - // us up to a block boundary, whichever is less. - // (DiskOffset | (BlockSize - 1)) + 1) rounds DiskOffset up to the next - // block boundary (even if it is already on one). - WriteSize = MIN (RemainingBytes, ((DiskOffset | (BlockSize - 1)) + 1) - DiskOffset); - - do { - if (WriteSize == BlockSize) { - // Write a full block - Status = NorFlashWriteFullBlock (Instance, Lba, Buffer, BlockSize / sizeof (UINT32)); - } else { - // Write a partial block - Status = NorFlashWriteSingleBlock (Instance, Lba, BlockOffset, &WriteSize, Buffer); - } - - if (EFI_ERROR (Status)) { - return Status; - } - - // Now continue writing either all the remaining bytes or single blocks. - RemainingBytes -= WriteSize; - Buffer = (UINT8 *)Buffer + WriteSize; - Lba++; - BlockOffset = 0; - WriteSize = MIN (RemainingBytes, BlockSize); - } while (RemainingBytes); - - return Status; -} - EFI_STATUS NorFlashReset ( IN NOR_FLASH_INSTANCE *Instance diff --git a/Platform/ARM/Drivers/NorFlashDxe/NorFlashBlockIoDxe.c b/Platform/ARM/Drivers/NorFlashDxe/NorFlashBlockIoDxe.c index 9d4732c6905a..9b8c76a171d4 100644 --- a/Platform/ARM/Drivers/NorFlashDxe/NorFlashBlockIoDxe.c +++ b/Platform/ARM/Drivers/NorFlashDxe/NorFlashBlockIoDxe.c @@ -121,3 +121,132 @@ NorFlashBlockIoFlushBlocks ( // Nothing to do so just return without error return EFI_SUCCESS; } + +/* + Although DiskIoDxe will automatically install the DiskIO protocol whenever + we install the BlockIO protocol, its implementation is sub-optimal as it reads + and writes entire blocks using the BlockIO protocol. In fact we can access + NOR flash with a finer granularity than that, so we can improve performance + by directly producing the DiskIO protocol. +*/ + +/** + Read BufferSize bytes from Offset into Buffer. + + @param This Protocol instance pointer. + @param MediaId Id of the media, changes every time the media is replaced. + @param Offset The starting byte offset to read from + @param BufferSize Size of Buffer + @param Buffer Buffer containing read data + + @retval EFI_SUCCESS The data was read correctly from the device. + @retval EFI_DEVICE_ERROR The device reported an error while performing the read. + @retval EFI_NO_MEDIA There is no media in the device. + @retval EFI_MEDIA_CHANGED The MediaId does not match the current device. + @retval EFI_INVALID_PARAMETER The read request contains device addresses that are not + valid for the device. + +**/ +EFI_STATUS +EFIAPI +NorFlashDiskIoReadDisk ( + IN EFI_DISK_IO_PROTOCOL *This, + IN UINT32 MediaId, + IN UINT64 DiskOffset, + IN UINTN BufferSize, + OUT VOID *Buffer + ) +{ + NOR_FLASH_INSTANCE *Instance; + UINT32 BlockSize; + UINT32 BlockOffset; + EFI_LBA Lba; + + Instance = INSTANCE_FROM_DISKIO_THIS (This); + + if (MediaId != Instance->Media.MediaId) { + return EFI_MEDIA_CHANGED; + } + + BlockSize = Instance->Media.BlockSize; + Lba = (EFI_LBA)DivU64x32Remainder (DiskOffset, BlockSize, &BlockOffset); + + return NorFlashRead (Instance, Lba, BlockOffset, BufferSize, Buffer); +} + +/** + Writes a specified number of bytes to a device. + + @param This Indicates a pointer to the calling context. + @param MediaId ID of the medium to be written. + @param Offset The starting byte offset on the logical block I/O device to write. + @param BufferSize The size in bytes of Buffer. The number of bytes to write to the device. + @param Buffer A pointer to the buffer containing the data to be written. + + @retval EFI_SUCCESS The data was written correctly to the device. + @retval EFI_WRITE_PROTECTED The device can not be written to. + @retval EFI_DEVICE_ERROR The device reported an error while performing the write. + @retval EFI_NO_MEDIA There is no media in the device. + @retval EFI_MEDIA_CHANGED The MediaId does not match the current device. + @retval EFI_INVALID_PARAMETER The write request contains device addresses that are not + valid for the device. + +**/ +EFI_STATUS +EFIAPI +NorFlashDiskIoWriteDisk ( + IN EFI_DISK_IO_PROTOCOL *This, + IN UINT32 MediaId, + IN UINT64 DiskOffset, + IN UINTN BufferSize, + IN VOID *Buffer + ) +{ + NOR_FLASH_INSTANCE *Instance; + UINT32 BlockSize; + UINT32 BlockOffset; + EFI_LBA Lba; + UINTN RemainingBytes; + UINTN WriteSize; + EFI_STATUS Status; + + Instance = INSTANCE_FROM_DISKIO_THIS (This); + + if (MediaId != Instance->Media.MediaId) { + return EFI_MEDIA_CHANGED; + } + + BlockSize = Instance->Media.BlockSize; + Lba = (EFI_LBA)DivU64x32Remainder (DiskOffset, BlockSize, &BlockOffset); + + RemainingBytes = BufferSize; + + // Write either all the remaining bytes, or the number of bytes that bring + // us up to a block boundary, whichever is less. + // (DiskOffset | (BlockSize - 1)) + 1) rounds DiskOffset up to the next + // block boundary (even if it is already on one). + WriteSize = MIN (RemainingBytes, ((DiskOffset | (BlockSize - 1)) + 1) - DiskOffset); + + do { + if (WriteSize == BlockSize) { + // Write a full block + Status = NorFlashWriteFullBlock (Instance, Lba, Buffer, BlockSize / sizeof (UINT32)); + } else { + // Write a partial block + Status = NorFlashWriteSingleBlock (Instance, Lba, BlockOffset, &WriteSize, Buffer); + } + + if (EFI_ERROR (Status)) { + return Status; + } + + // Now continue writing either all the remaining bytes or single blocks. + RemainingBytes -= WriteSize; + Buffer = (UINT8 *)Buffer + WriteSize; + Lba++; + BlockOffset = 0; + WriteSize = MIN (RemainingBytes, BlockSize); + } while (RemainingBytes); + + return Status; +} -- 2.25.1 -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#119165): https://edk2.groups.io/g/devel/message/119165 Mute This Topic: https://groups.io/mt/106260138/21656 Group Owner: devel+ow...@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
