Forgot the ftdi cable. There are lots of FT232R 3.3v usb cables on amazon https://www.amazon.com/ft232r-usb-uart/s?k=ft232r+usb+uart
On Mon, Nov 17, 2025 at 12:28 AM Harry Hsiung <[email protected]> wrote: > You can get this on mouser which carries cables for aaeon platforms > EP-CBUSB10PFL01 AAEON UP | Mouser > <https://www.mouser.com/ProductDetail/AAEON-UP/EP-CBUSB10PFL01?qs=%2Fha2pyFadujIhdWT%2FBglH%252B8eLhJc3tYwKVNFRQzH3zKWZ4kE8rH3iQ%3D%3D> > > aaeon part no. EP-CBUSB10PFL01 > > The wiring and the dediprog cable were posted up on tianocore.org under > training a long time ago. > [image: dediprog14pintoAaeonflashcable.png] > > > I made a cable from a posting from the up-shop community which showed the > 12 pin spi connector next to the rtc battery cable (CN16 on my up extreme > board). > > I still do occasional trainings for universities and other customers after > I had retired from Intel using the Whiskeylake EDK2-platforms mintree build. > There were some other fixes to the code for the memory init that I should > go find and post. > > Harry Hsiung > Olympic View Software LLC > [email protected] > [email protected] > > > > On Fri, Nov 14, 2025 at 7:57 PM Rebecca Cran via groups.io <rebecca= > [email protected]> wrote: > >> Last year I bought an UP Xtreme i14 Series with Intel® Core™ Ultra 7 >> processor 155H with the hope of enabling EDK2 on it. However the >> documentation for the hardware seems very sparse, and it seems the USB/UART >> connector cable has been discontinued. >> >> I was wondering if anyone else has one, or has information about it which >> would allow me to get set up to develop and debug firmware for it? >> >> I’m at the point where I’m ready to rehome it, since without the cable or >> hardware information it’s no use to me. >> >> — >> Rebecca Cran >> >> >> >> >> >> -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#121678): https://edk2.groups.io/g/devel/message/121678 Mute This Topic: https://groups.io/mt/116303542/21656 Group Owner: [email protected] Unsubscribe: https://edk2.groups.io/g/devel/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
